Ep.1664 - Why Prefabrication Matters in Construction
6 minAudio
In this episode, Jason explains why prefabrication should be used strategically to reduce bottlenecks, improve flow, and lower risk. The goal is not to prefabricate everything, but to use it where it creates the most value. Jason shares how prefabrication can dramatically shorten bottleneck durations, improve working conditions, and force coordination problems to be solved earlier. What you'll learn in this episode: Why prefabrication is most valuable when applied to project bottlenecks. How early coordination and design support help make prefabrication successful. Why prefab can reduce field variation, delays, and costly coordination problems. How intelligent prefabrication can improve schedule, cost, risk, and working conditions. Are you identifying the right prefabrication opportunities early enough to remove bottlenecks before they reach the field? If you like the Elevate Construction podcast, please subscribe for free and you'll never miss an episode. And if you really like the Elevate Construction podcast, I'd appreciate you telling a friend (Maybe even two 馃槉). Also, here are links to our YouTube Channels: 路 Jason Schroeder YouTube Channel: https://www.youtube.com/channel/UC4xpRYvrW5Op5Ckxs4vDGDg 路 LeanTakt YouTube Channel: https://www.youtube.com/c/leanTakt 路 LeanSuper YouTube Channel: https://www.youtube.com/channel/UCzQDevqQP19L4LePuqma3Fg/featured 路 LeanSurvey YouTube Channel: https://www.youtube.com/channel/UC-Ztn3okFhyB_3p5nmMKnsw
Audio and video play straight from the show's own hosting. PodSubs stores and serves no media.
Transcript
From the show. Tap a time to play from there.
Hey there everybody, I hope you're doing well and staying safe out there. This is podcast number 1664. I'm going to talk about what happens if we are missing prefabrication. If you're interested in that, please stay with us. Hey there everybody, I am super excited to be with you. This is candidly a little bit of a short podcast and I do apologize for that. When I talk about prefabrication, I'm not talking about being radical and prefabricating everything and I'm not being radical and talking about stick
building everything. I'm talking about prefabrication being intelligent in the sense that it's easy to do, it's cost effective, it helps the schedule, and specifically it's at a bottleneck. What do I mean by at a bottleneck? I always tell this story but I'll tell it again. At the Bioscience Research Laboratory, the underground conduit for the electrical room was quite intense and we had to hog out basically a five foot
deep by, you know, whatever it was, a 40 by 50 room for this massive electrical room in the new build. It was going to take forever, well not forever, it was going to take six weeks to rough that in, slurry it in, and make sure everything was good to go. I asked the electricians, I was like, hey this is a bottleneck. We get to the bottom of the hole and then we're waiting there six weeks. This can't, or five to six weeks, I'm not trying to be dramatic, and I was like, what can we do?
And we, after some back and forth, we figured out, or they figured out, sorry, that we could prefabricate the entire thing. So they built it back at their shop and then, I'm going to say assembled it all together with, you know, different support structures, but then cut it up into segments, color-coded it, and they were able to get down in five days. So if you have a bottleneck duration in your project, you want to prefabricate those areas. Now, I also like prefabrication because it solves the problems before you hit
those problems in the field. It also makes for a better environment for workers and for me, which I really, really like. So I love prefabrication, okay? So, super big fan. I really like the idea of us starting to do more, even if we're not doing prefab at shops and shipping it in, doing more assembly in the nicer tent at the job site itself, at the site. So I really, really do like this. First of all, if you don't identify early on what you want to do, then you will
be behind and the design won't support it. So then you'll have a nightmare getting this done. It's very, very difficult and then, you know, the designers might actually want more money. Second thing is if you don't identify it early on and design it, then you will experience those bottlenecks, you will have higher additional costs, and you will have more variation on the job site where something can go wrong. And I just have to say that this whole concept of prefabrication means that
you're going to coordinate, which means it forces you to do lift drawings and coordination drawings and assembly drawings earlier on. You're going to miss the opportunity to find those problems early on and you're going to find them in the field when it costs you, I'm going to call it two to ten times as much. I'm not going to be dramatic on this, but the bottom line is if there's a coordination issue, if there's a drawing issue, if there's missing information, if there's a problem in the assembly, a problem with the materials, you're
going to find that out in the field. It's so much better to move that timeline up and have everything figured out soon enough to where you can actually prefabricate it and then just assemble it like legos on the job site. Now, candidly, it is easier said than done, but we must at least begin and get used to this. We need to turn as much of the project into an assembly line, a manufacturing plant, as we possibly can. So the answer isn't stick build everything or prefabricate everything.
It's about intelligent design that fits within our capacity. So if we're not prefabricating, we're missing out on opportunities from a cost standpoint, from a schedule standpoint, and from a risk prevention standpoint. We cannot understand the opportunity here. Meaning if somebody estimates that stick building it, well, I'm just going to use really silly numbers, you know, just so that the human brain can understand it for myself.
You know, let's say stick building it costs $99.50 and prefabricating it costs $100.50. Like, I'm going to go prefabrication because I know that the $99.50 charge for stick building is going to end up at $110 by the time we have impacts and delays and all of the chaos that comes from variation. So prefabrication is a thing. If we don't have it, we're basically going to have a harder time making money, making schedule, and it's going to be harder on our folks.
Avoiding the hardest problem rarely makes it disappear; it usually gives it more time to grow. In this episode, Jason explains why one of the best ways to improve projects, leadership, and even your own peace of mind is...
When estimating durations, people tend to drift toward one of two dangerous extremes: padding the schedule because they have been burned before, or promising unrealistic performance because they believe they can push...
You do not need authority over the entire project to start leading. In this episode, Jason shares a story from his own career to explain why the most effective way to lead from below is not to wait for permission,...
A three-week pull may look like Lean planning, but Jason argues that it can leave teams focused on what is directly in front of them instead of preparing the entire phase properly. In this episode, he explains why...
A great meeting should do more than share updates it should expose what is off track and help the team solve it. In this episode, Jason breaks down the purpose and flow of the Level 10 Meeting from the Entrepreneurial...