Send us Fan Mail Commuter has weighed in and feels that middle school band instrument repair stories are far and away the best. Greg Beckwith has worked at Minnesota State SE Technical - Instrument Repair in Red Wing, MN for decades. His students work all over the country after matriculating. This regional program is one of the world’s best for band instrument repair! Greg also correctly identifies all of the most bizarre instrument repair "who-done-it’s" in a speed round favorite. Peter, Chris and Phil correctly identify how to stumble through a podcast. Learn More Here: https://mplspops.org/player-profile-greg-beckwith/ https://www.southeastmn.edu/programs/band-instrument-repair/band-instrument-repair-aas/ Midwest 2026 Come visit us at booth #1335 REGISTER NOW: 2027 BEYOND THE NOTE FESTIVALS - A few spots remain!! https://www.btnmusicfestival.com/festivals/ensembles/kalahari-1 COMMISSION POSSIBLE 2028 W/ OMAR THOMAS https://www.btnmusicfestival.com/education/commission Support the show
Audio and video play straight from the show's own hosting. PodSubs stores and serves no media.
Transcript
From the show. Tap a time to play from there.
SPEAKER_05I know they're trying to like make me better, but like nobody cares about my lighting. It's a podcast for Christ's sakes. Nobody cares about the lighting. I look pasty in old no matter what the lighting.
SPEAKER_03No matter what the lighting, I look bad.
SPEAKER_07Pasty is probably being a little bit overly kind.
SPEAKER_06Okay, how are we? Launch into it, Phil. Come on, give us to it. What happened today?
SPEAKER_07Uh we have brass techniques today. Always good to hear the sounds of learning. Sounds of learning. Eighth positions and anyone. People buckled down today in brass techniques. They went after it. I said, look, final playing quiz Friday, need characteristic tone, must move air. Loud.
SPEAKER_05Our trombone section was having a sectional orchestra sound uh trombone section, and they were doing Shasti Five, and they were they were eating small, raw children. It was beautiful. Uh but they were in the room while we were getting ready for our third concert band setup. And uh I was like they're like, we we can leave them like no, this is fine, it's actually good to hear music. But just listening to how they spoke about what they were doing was hilarious. It was just beautiful. That's great. Yeah. And I said louder, and they like, we like louder.
SPEAKER_05Uh-huh. I know, I know. I close the draw.
SPEAKER_06Yeah. Miles said he got the uh the hand from the uh in orchestra already. He goes, I only played three notes and I already got the hand, you know? And I'm like, Well, do you enjoy those three notes though? I said, live it up, baby. Tell him to prepare for a lot of that gesture over his career. I did. I said, that's uh that's gonna that's gonna happen more, so good for you. Um, gentlemen, I've prepared a statement. I would like to read the statement in its completeness and have you listen to the statement.
SPEAKER_06Here it goes. You ready? A good coach doesn't just teach, they inspire. And regardless of the fact that our coach happens to be my brother, I've taken his words to heart. He specifically challenged me to reach out to author David Epstein. I did just that. Now while I have received absolutely no response, I've decided to decided to embrace the spirit of the challenge, to be courageous, and to invite a few other big names.
SPEAKER_06So I'm thrilled to announce that invitations have been issued to the following Matt Damon, Barack Obama, Oprah Winfrey, Serena Williams. Now, some people have said the following folks could not be contacted, and I'm proud to say that they're wrong. I'm currently awaiting responses from these four people as well: Michael Scott, Ron Swanson, Miranda Priestley, and Mark Watney. I'd like to thank Coach Gleason for his continued support, encouragement, and unwavering belief that apparently anyone can be reached if you're willing to send enough emails.
SPEAKER_06Now we wait. So just a reading. That's congratulations.
SPEAKER_07Wow. Is this typically how you communicate with your brother?
SPEAKER_05Just so it goes. You spend so much time in that basement. It can't be a good question.
SPEAKER_07So what now what what what do you predict the coach's response to this particular diatribe will be? He won't know what to do. He won't know what's going to call you.
SPEAKER_05He'll just know where you talk to all those people. And then um Mark Quatney got back to me right away.
SPEAKER_07Yeah, I have to say the brothers, Gleason, have a specific way of communicating with one another that leans towards general disagreement. Yeah.
SPEAKER_06I've said what I've said. You have said what you did. I stand by it. You're doubling down. I stand by it. I am. I am. I am. There's a lot of data to support all of this. Hey, did you know that 82.7 of all statistics are made up on the spot?
SPEAKER_05That's a good one. That's a good one. Oh my god, you got me. Damn it. I should have been stronger. That was a good one. I should have been stronger. I was totally like H. Yeah, yeah.
SPEAKER_07Uh got you in. Yeah, but it's you can't react too quickly to Gleason. You did it. And you didn't. But inside I was like H point seven.
SPEAKER_06Damn you. This is what I do on my lunch hour now. I spend my 15 minutes. Did you take an hour for lunch? No, it's it's a solid 15 minutes, but I've choose to do this. I'm like, what should I do that's not work? And this is that was it. That's good. I'm proud of myself.
SPEAKER_07Hey, you know what I did on Monday?
SPEAKER_06What?
SPEAKER_07Um I had I had well, yes, you're gonna listen. So buckle up, Peter. I get I had a lunch date with my lovely bride. She was on the way from Madison where she was visiting our daughter, and she was on the way home, and I got to have lunch with my bride, and it was absolutely wonderful.
SPEAKER_05I'll reiterate how does your wife feel about that? Just kidding. Just kidding, Alison's friend of show. Friend of show. Yeah. Friend of show.
SPEAKER_06How was Taco Bell?
SPEAKER_07Not a fan of show, but has been on the show. It was not Taco Bell. We went to the goat. Oh, that's a good choice. Yes. That's a good choice. Solid. It worked. Um so, anyways, that there's no moral to this story. Just a just a relaying of greatness. Just uh just a good deal. Nothing less. Just uh nothing less. Just happy thoughts. I like that. That's good. Yeah. Well, it it's there's a first for things on the podcast, and that's one of them. Okay, I'm gonna write this down.
SPEAKER_07I think we should get to the guest. Oh, we have a guest today? Is that true? We do run the guest. Um well, if you two would stop blabbering, I'll get to that. Seriously. Shut up. Have you been on the show before? Um our guest played Little League Baseball for the Washington Senators and Pittsburgh Pirates in New York State. I got it. Done. Um he our guest won fifth prize.
SPEAKER_07Uh excuse me, fifth grade. Wow. Thinking about Philip Ostrander, take two from the heart.
SPEAKER_05I'm digging. Or just try to read the words. Letters together, make words, words together, make sentences.
SPEAKER_07You can't guest won a prize in fifth grade uh in summer music class for repeat the rhythm and got a gold and black button. Um let's see. Our guest is a horn player and is uh began his musical journey in New York State on clarinet and piano, um, and had parents who were both musicians, um, uh eventually settled on horn uh and had stops at the Interlochen Arts Academy, uh, the Eastman School of Music, the St. Louis Conservatory of Music, has been a member of the U.S.
SPEAKER_07Air Force Band, the Mexico City Philharmonics, the Minneapolis Chamber Symphony, has been an extra sub with the Minnesota Orchestra, and presently plays with the Rochester Symphony Orchestra. Um our guest has had the opportunity to play on tour, to play jingles and freelance and record, and has played every genre from opera to um uh blues to rock and roll, and you name it. Plays Nebraska on Tet, uh plays in the Minneapolis Pops Orchestra, uh, and has a mainstay job teaching musical instrument repair to students who arrive at the doorstep of Minnesota State College Southeast Technical at Red Wing, uh, where students learn how to restore wind instruments.
SPEAKER_07Uh, he lives in Red Wing with his lovely wife Susan and the energetic lab Ginger Snap, and loves to be outdoors and loves Red Wing. Uh, this is the wonderful and talented and friendly and entertaining and humorous Greg Beckwith.
SPEAKER_06Yes. Hey, here we go. You've got to reveal yourself.
SPEAKER_07You gotta unmute yourself. Okay. I'm mute. Unmuted. And then we gotta do the screen, the video. You gotta look at the screen. Yeah, we're yeah.
SPEAKER_06Yeah, you don't. I wish Phil would turn his off.
SPEAKER_03Hey, very nice. I like the banter. So in the in the Greg, you already.
SPEAKER_07I don't, but it feels like I'm getting to. Uh in the first four minutes. Um feel free to ignore them.
SPEAKER_06Um I know of great.
SPEAKER_04Peter's um headrest makes it look like he's got like extra like um Spaceball's helmet head. Like, you know. Have you guys noticed that? If you if you see yourself, it's like oh, there it is.
SPEAKER_05I see your schwartz is as big as a podcast.
SPEAKER_07So uh Greg and I were just discussing the finer points of the um academic semester at Red Wing, but I think you're I think you're a little further along than Peter and me, aren't you? You're like uh like six weeks in, aren't you?
SPEAKER_04This is our sixth week, yeah. Yeah, we start mid-August.
SPEAKER_07Yeah. Yeah. Oh wow. Yeah. That's when you get going. Um but I mean you should you should tell um uh Peter and Chris and our uh two listeners, our two commuters, um, like how many are in the class and and what you would typically get starting mid-August or well, pretty much year-round.
SPEAKER_04So um our capacity for the whole program, which is all families of wind instruments, all the woodwinds and all the brasses, is 48. And we split those 48 in half. And sometimes we start with less, but our capacity is 48. And um so for eight weeks, one group is doing woodwind family and the other group is doing brass family. And then after eight weeks, they switch. So they're all learning the foundation and the fundamentals of both those families of instruments.
SPEAKER_04So I'm in the sixth week of the of the first uh Chris.
SPEAKER_05No. Uh let's see here. And then Greg, I want to ask you do you remember a Jasmine? Uh, what was her last name? Lull or Lyle or L-E-H-L?
SPEAKER_04Yeah. How do you know Jasmine?
SPEAKER_05So she was 15 years ago. Yeah, and now she's in Nebraska, and she's so far away in rural Nebraska that she came and got a year sabbatical to study with you so she could do her own instrument repair at her school. And they not only invested in her c coming to work with you, but then also in a lot of the repair and maintenance equipment because they can't get it fixed. And other school districts are now also sending her their equipment in the summer, and it's really like her almost her second job, but the what she had to do to make Western Nebraska work.
SPEAKER_04Yeah, I really enjoyed Jack's. Um, she's one of those that just comes in, the model student that comes in and knows exactly what they want to do, you know, has is been out in life and worked and is right, you know, right, focused from the from the beginning. And she was just a little delight to have here and and dry humor. I don't know if she you caught any of that when if you knew her well enough, but she her quips and her Yeah, yeah. Her little sleigh. She was fun, and she's just doing terrific.
SPEAKER_04She sent me pictures of her shop this summer, and it's beautiful. They've equipped her really well. And she moonlighted out in a shop in Virginia for a while. Did you know that she was out with uh with another graduate out in Virginia helping out there as soon as she graduated just to you know get honor skills and everything and start hitting the ground running? And then she went back to Nebraska. So yeah, we stay in touch. Yeah, she's a good one.
SPEAKER_06Yeah, that's neat connection. So, Greg, would you would you recommend I I I don't even know if how often that happens, but are there other music educators that that come back and that hop into the program while still teaching, you know, not even doing a career shift.
SPEAKER_04Um, we have had it doesn't happen very often, you know, because of their schedule. They can come and learn one family of instruments at a time. Or they could just, if we have the space and and we have aren't full and we got the seats, they could come and just do that family of instruments. So that that's happened. Yeah. We always get asked about a summer course, and there's enough other places around that are doing that, and that's kind of their specialty. Um, so that's we tried it for a while, and actually we didn't get that much response because of the other places um they were known for it.
SPEAKER_04So we just stuck with the the nine month during the you know academic year.
SPEAKER_05So, Greg, how did you get into instrument repair? I mean, you're quite a player, you're still playing all over the place. Is this kind of, I don't know, like the day job to playing, right? For some it might be teaching with Phil at Eau Claire, and for others, it's living in their basement like Chris.
SPEAKER_04Well, honestly, you know, I was after after uh Mexico City, I came back, I was getting married, and I didn't want to go back to school, and I I wanted a skill, and I was playing extra with the orchestra, and we went out afterwards, and Kendall Betts, the principal at the time, was just kind of going through you like electrician, you like IT, you like hardware, you like software, you like plumbing. I said, No way, plumbing. Uh, you'll you like carpentry. He was trying to think of trades, you know.
SPEAKER_04He said, you can take auditions till you, you know, but you gotta win, right? You know that. And I didn't really have the drive anymore for auditions. And honestly, I was ready to go to Vanderkoek to get an ed degree. And um, I remember sitting at a table with my wife just looking at her and saying, I don't want to teach. I mean, I think I could, but I don't know if I'm gonna get the ideal situation. You know, I would love to teach if I know I've got a really good program and the kids are great, and you know, the support and the district and all that stuff.
SPEAKER_04So I'm out out with the guys afterwards, after Aida, playing extra in Aida, and Kendall just looks at me and he goes, Well, for crying out loud, why don't you go down to Red Wing and take that course? And I don't know if you guys, Phil knows this, maybe, but he might not. Um, my dad started this program, and it was the furthest thing from my mind to do. I was a klutz with any tool. I was trying to fix my bike with his specialized tools, and he was always getting mad at me because using his polished players and go, no, don't touch that screw.
SPEAKER_04So I was not mechanical at all. So it it's kind of amazing. And I remember looking at my wife and I said, you know, I think maybe this could be something, you know. I just take she was occupational therapist, so she could work anywhere. And we took nine months out of our lives and came down here, and um, I fell in love with it. I just was like, wow, you know, especially on my own instrument, the horn. Um, and I started doing modifications on it and doing, you know, uh other customizing stuff.
SPEAKER_04And I learned the whole family of instruments, but I kind of gravitated toward the horn, was kind of and then I went back in Minneapolis and worked for 12 years in the Schmidt music system, and uh I could come and go at the shop. It was ideal with freelancing. Um, the boss loved to brag about where I was playing who was playing with, and so yeah, it worked out really good.
SPEAKER_06And you kind of imagine a valve. What's that? My well, my comment was better. Uh I hope you added a valve to the horn. Like, is that the modification that was done?
SPEAKER_04Uh first a screw out.
SPEAKER_07It was a slide. Yeah, it was a slide, right? Long horn. It needs more slides.
SPEAKER_04Yeah, really long slide, yes. I want a sack horn. A sack horn.
SPEAKER_06I mean, isn't it true that Red Wing is the spot at this point, right? In the United States? Or is there another location?
SPEAKER_04There are two other locations. There's a couple other accredited. Um, there's a new one that, but anyway, um we're the biggest. Uh, we're not the oldest. Actually, Sioux City, Iowa is the oldest. They're, I think, a year or two before us, but somehow we grew the biggest. And, you know, um, not because he was my dad, and not because there's like, you know, but set a standard for excellence, and I think that has been maintained throughout.
SPEAKER_04Not that the other schools aren't producing good graduates and and successful graduates and stuff, but um, I think there's a there's a there's a specialness here. Um even even with the other programs around. Um we try really hard and we try to do our best and we try to instill that in our students. So it's it's benefited. We've we've um reaped the, you know, bear borne the fruit from it.
SPEAKER_05So and I think it's interesting that you are you avoided teaching, but in some ways you're definitely teaching is your is your you're fixed into this passion now as well. It's just a just not classroom music teaching.
SPEAKER_04Right. Uh it's just so rewarding. It doesn't when I first came, it was just uh I had to learn like a lesson plan, curriculum, syllabi. Uh I have to write tests. But um, you know, I I got help with doing all that stuff. And and basically you just start sharing what you know, you know. And um the rewards are seeing the students produce the work. It's like they go above and beyond, you know, and we encourage them just to experiment, to explore, to invent, to, you know, because that's how new new concept new ways of doing things um happen and come about.
SPEAKER_04Even tooling and equipment and it's it's really pretty cool. 3D printing has brought in a whole nother realm of stuff. Yeah.
SPEAKER_05Oh yeah. Tell me more about that. Tell me more about that.
SPEAKER_04Well, it's not just fun things. Um, we've actually made tools that help us repair things like piston valves. There's some filaments. There's filaments that that respond differently um than the other tooling we've had. Most of the tooling for doing brass work is, you know, steel, high polished steel of some sort. And um some of these filaments that we can use, they have a flexibility and um I don't want to say cushioning, but it's a different kind of tactile um contact with the with the parts and things.
SPEAKER_04So um we can make everything from, like I said, something to help with with uh repairing pistons. Um there's different materials that we're using um in in combination with um dent work, so to speak, in many, in many ways, to smooth things out, um to to finish dent work. Um but then we can also make real practical things like holders for parts as we take them apart. And um but what's really exciting is when you get into to making parts, making like I've got uh I got a mouthpipe right here, and we want to we want to do a filament, and there's there's people out, we're not we're not the only in and in particular.
SPEAKER_04Um so if we can we can 3D print the form that this needs to get bent around, and we can create a groove in there that it follows, you know, it starts from a straight pipe, and it's obviously filled with something, so it doesn't crimp. So that's that's created a whole new realm of possibilities of doing making parts. So Greg, one of the questions we've been asking is. I'm just at the very elementary ground level. I'm just getting just just just getting into it and finding out what can can be done and stuff, and making lots of poo coming out of the back of the machine and hopefully you know, getting something that's workable.
SPEAKER_04But once you learn, once you're in the CAD and the in the the um the design aspect, you can just state you can change your specifications, your parameters, and everything. And you've got like you get a wider tube, you just put in different different numbers. So it's pretty exciting the possibilities.
SPEAKER_07Um you must have had that printer for a little bit of time now.
SPEAKER_04Um our our recently retired longest tenured um instructor, um, John Hooth, just retired this last year. Um, he did a sabbatical and he focused in on 3D printing. So I've just been writing his coattails the last year. But we've had a couple printers. We had one printer here. And we had trouble with um um the the tech part of it. It was it was constantly it getting interrupted and and s sending the design to it and having it print right.
SPEAKER_04So we got a couple others that worked much better. So they were running almost around the clock last year. And we even started a new course. Nice. A new extra course for the students. Yeah.
SPEAKER_06Is there a valve trombone course? Like specific? No? Specific valve trombone?
SPEAKER_04Okay. You mean like the firebird? You want to have a fire?
SPEAKER_06Is do people just practice on valve trombones? Like, I mean, you're probably not hitting a Monet trumpet right away, but you offer up that? No? Peter says no.
SPEAKER_04Donated valve? We get donated valve trombones after they finish their trumpet if they can. I bet you do. Or they're the reform. See the stuff we get see the stuff we get donated. Yeah.
SPEAKER_06It's it's kind of crazy. I'm sure you do. Yeah. I mean, what does anything prepare you for what you get back from sixth graders? I mean, they can destroy anything in minutes.
SPEAKER_04You know, I I've been here since 2003, and I still get defied by what they can do, how inventive they can be, how creative in the wrong ways. It's just, it's like we look at it and go, ah, did they I mean they've they got to have some intention and some some focus to for destruction. There's some really amazing destructive creativity out there.
SPEAKER_06Right. Breaks every law of physics possible. Yeah, I'm with you. And sometimes it's really cool looking like stuck in there.
SPEAKER_04We had a trumpet bell, it looked like they took a punch and went all the way around symmetrically, all around next to the rim. And we almost didn't want to fix it because it was so cool looking. They had to work really hard at that. Yeah. And I don't think it was just a hammer and a nail. I mean, I think they they had some there's, you know, if we turn that around, you know, fuck it on the other side.
SPEAKER_05So, Greg, I have a serious question. Not to this is actually more fun. I want to hear about the crazy things you've seen more. But so you focus on woodwind and brass. You don't do you do lutenere stuff or percussion stuff at all?
SPEAKER_04So we have, okay, uh, first of all, we're band instant repair as our program. The college, our programs in the college, our musical instrument repair programs, our violin family of instruments, which includes also a segment in building a violin. And then there's guitar repair and building. And we're always envious of them because at the end of the year they have a show because they can make an entire instrument. It would take us one year to make one component part for a band instrument.
SPEAKER_04You know, it's just a whole different world. And um, if you guys ever can come here in May, in mid-May, and see what these students make, it's just it's remarkable. Because they they get to to let their creative juices go, and you should see their inlays and their different woods, and it's beautiful stuff. And then they have professionals from the Twin Cities and surrounding area come down and play the instruments for them that day. So can you imagine the instrument you built having a pro play it, you know, and give their opinion on it?
SPEAKER_04So that's pretty cool. And then as far as percussion, it's its own percussions, it's really its own animal. And so thankfully, um, we've we've had we actually had one of the Ludwig uh family people years ago, and we still have that archived in video. And so we give the students a lot of resources that we aren't necessarily going to teach here, and so they can take that and at least know how to change us a snare head or adjust a timpani. And and the videos are very thorough and can be step by step, just follow them.
SPEAKER_04So we provide that to them. We've talked about having a separate certificate course for percussion. Um, but it's in in nine months to give them foundation of all everything like from a piccolo to a tuba, that's a lot, you guys can imagine. Yeah. Yeah. So it it'd be overwhelming and we'd have to cut something. Something would have to be shortened.
SPEAKER_07So, Greg, one of the questions we've been asking guests recently is is uh um giving the your students um or a student uh the opportunity to fail. So when you've given them a project and you can tell it's headed south, um, do you do you do you cut them off or you do you let them do you let them uh uh make a full mistake?
SPEAKER_04You gotta let them make the mistake because they're gonna learn from it. And you laugh with them. It's like, wow, that's a me. How did you do that? You know, over the years I've just gotten better at at just just you know, swimming right with them, you know, it's far better to do that than than reprimand or them so unless they're being malicious. And and I can't I can't give anybody. Well, there was one guy that we said, you know, you gotta tap on that a little hard, and he just mashed everything.
SPEAKER_04It's like, uh, that's not what we were talking about. And but that's that's the that's the rarity, that's not the norm. So but yeah, I mean, as you guys you you learn by make by making mistakes, you know, and learn from your mistakes, and that that's helped you grow and that helps you, you know. And we can invent ways how to do it. Yeah Yeah, yeah.
SPEAKER_07They defy the 10-year-old sometimes, but um can uh let's see um we talked also right before we'll get there. Yeah, no, we we talked um right right before uh we got done. I said, so Greg, are your students all getting gigs afterwards? And you should just tell them like what the students do when they're done at Red Wing.
SPEAKER_04Um so they can go into an independent repair shop, which there's a lot of those. Um we call them mom and pop's. You know, they're not associated with some big music chain. They could go to a music chain, there's a lot of big ones out there, uh, you know, music stores. Um, some want to go into manufacturing. Um, unfortunately, there aren't many places they can go in in the North America, and I'm sure you guys know, you know, with with so much stuff being sent other places and made other places.
SPEAKER_04Um, especially in the woodland world, like uh specific like obal makers or flute makers, or um we've had a couple people back when castel was still around, we had a couple people go and work with canstel. We have a couple graduates at Con Selmer right now. Um one is in the R D and another one is in um parts. And so they they were all you know um learning and hoing the honing their craft, and then they came, but but the one who's who's in uh R D went directly from here to Con Selmer.
SPEAKER_04They had that ambition, they wanted to do that. And then how um how many of your students have oh go ahead, sorry. Oh, um I was gonna say many they they know that they they want to hone the craft for a while, but they they definitely have the dream and the desire to go work for a maker. So we have some people working for small, you know, the cottage makers, the high-end pro stuff. They've gone on to do that.
SPEAKER_05Yeah. Yeah. And then like you you give a certificate, but my wife's a flute player, so there's Haynes specific repair people and Powell specific repair people, and Brennan Cooper. Like they can go get that certificate, or they just kind of have to prove themselves to that company and get that mark. How does how does that end up working?
SPEAKER_04Um there's a couple, like there's a some some specialized pads for flutes. One's called Straubinger, and then there's another flute one. Um, I think it's Miramatsu. You have to get certificates for those. And and um I think as early as six months, then if they they have to prove themselves, they have to apply to to go get those certifications, as far as I know. Um but it's open to to anybody who has credentials, so to speak, and has worked, you know, on enough flutes.
SPEAKER_04And yeah, they can they can pursue those things.
SPEAKER_06So Greg, let's talk about dip it, dip it, just one one thing. Let's talk about instrument-shaped objects. That's the stuff that you can buy, like, and I don't want to throw anything under the the, but mostly stuff you find online and some junk. Okay, let's get right to it. Because people go out on Amazon and other places, and if it comes with white gloves, people don't buy it. Now, here's my question How incredibly crappy is that stuff? Like, I've heard people say I'm not even gonna look at it because I'll touch it and it will break.
SPEAKER_06I mean, is this do you agree with that? Is it is that all crap, just junk?
SPEAKER_04Um honestly, it's gotten a lot better. Um, they they they've just learned in the beginning, they just didn't know. They didn't know materials to use, they didn't know repair or um manufacturing processes, and and there were they were uh seeking out people in in the US uh building market to come and and help them and in other places too. So it actually has gotten a lot better. Um we like to say any instrument can be made well or poorly anywhere in the world.
SPEAKER_05Um that's true.
SPEAKER_04And the biggest thing is is can you get parts and will they stay repaired? That's that's the biggest thing. Um and music stores have to walk a delicate line because many years ago when the imports started first flooding the market, there was actually a huge music chain that got um a big slap. They they got in trouble by just by just calling things as they thought and saw them and draw, you know, negatively, and they got slapped with a lawsuit and they got I think they they have actually run that course, you know, and are back in business, but it really hurt them for many, many years, obviously.
SPEAKER_04But it it's really about can you get parts and you can can you repair them? And and that being said, one of the things we emphasize a lot, we have 12 lathes. Um five are are large, if you guys know what lathes are, metal lathes, five of them are large, and then the the rest are what are called mini. And um, we teach them how to use lathes and make things, and mills and drills, and sanders, drill drill presses, and sanders, and yeah.
SPEAKER_04So they're they they make themselves more valuable and um uh value added going to an employer if they know those machining and making skills. I got a student right now. He started he started making a patch for this uh crook on a trumpet, and it looks like a gladiator helmet. I was just like, are you autistic? He goes, artistic. And he said, Yeah, I liked it, I liked it, you know. And I encouraged him he should get into engraving.
SPEAKER_04And um, so it's it's really fun to see what they can do. They take these other talents in their lives and abilities and skills, and I mean, I wish I had it to show you guys. It is gorgeous what he's done. And I just we were just gonna put this patch over to cover up a cracked part on a on a on a let's call that crook. You know, it's the curved part coming out of a tuning set. So it's really fun to see stuff like that, you know.
SPEAKER_05And now a message from our sponsors.
SPEAKER_06Grand Tours Incorporated is a trusted leader in designing custom international group concert tours for student and adult music ensembles, setting the standard for traveling with purpose.
SPEAKER_05I know because we use them at Concordia all the time, and when I was a high school teacher as well, because they provide authentic music performance opportunities at distinctive venues, and they engage local musicians, conductors, and composers.
SPEAKER_07Grand Tours. They aim to inspire artistic growth and enable transformative cultural connections through music while creating a sense of family throughout the journey.
SPEAKER_05Visit Grand Tours online at GrandTours Inc.com. That's Grand ToursInc.com. To learn more of other services and request an international tour design specifically for your ensemble.
SPEAKER_06Anyone can sell you an instrument. A true music partner helps you build something bigger. At Hyde Music, they support the educators, families, performers, and advocates who keep music thriving. For nearly 80 years, their family-owned, musician-operated team has provided instruments, rentals, repairs, educational resources, and creative solutions with personal service every step of the way. Expect more than a transaction.
SPEAKER_06Expect a partner. Learn more at hidmusic.com or visit HideMusic in Appleton, Green Bay, Madison, Oshkosh, and Stevens Point.
SPEAKER_05Can't get enough of me? Not sick of me yet? Come get your master's degree in music education with me at Concordia College in Moorhead, Minnesota. We offer a hybrid degree plan so you can keep teaching and getting paid and still have an in-person cohort in the summers to enrich your experience and learn a lot from others as well. Already have your masters? Prank your less educated colleagues by sending them my way. You got students? Ship those beautiful children off to Moorhead. We want your music majors, your non-majors, good kids, bad kids, smart kids, and everything in between. Music scholarships here are available for all students with an annual deadline of February 1st.
SPEAKER_05Info about all these options and more can be found at Concordiacollege.edu slash music. That's Concordiacollege.edu slash music. Or just contact me, I'll take care of it.
SPEAKER_04So it's really fun to see stuff like that.
SPEAKER_05Okay, some of the funniest things you've stuck in an inst you've seen stuck in an instrument.
SPEAKER_04There you go. Okay, this is the honest truth. There I didn't I didn't find it, but it was sent to us by another shop. It was the sonic character that came out of a tuba floating in an ultrasonic. A stuffed sonic character in an ultrasonic that came out of a tuba. And they they swear up and down that they didn't stage it. Then the hardest thing to get out was, you know, you know the squish balls that your kids might have had.
SPEAKER_04They have the little tentacles, they have a real solid core, but then they have the little you know fingery, feathery tentacles that stick out, you know? So they're actually this this diameter, but the core is only that diameter, and the rest is that's the part that's solid. We had we had that stuck on a euphonium one time. And usually when you have something stuck, you're sending things down to dislodge it from you know a smaller to a bigger area, and we just could it kept getting worse and worse and worse. What was happening is the tentacles were getting squished and the core was just getting lodged into the and we had a guy with little kids, and one of the tentacles came out the bowel and he goes, I know what it is, and we were heating it at that time.
SPEAKER_04He goes, Stop! It was just gonna become one with the interior of the euphonium. We ended up having to take the the curved portion, the bottom portion that's called the bow. We had to unsolder that completely, and there it was, and it was like the the euphonium. So yeah, and we always keep what we find, we don't give it back. Well, well, there are times when the parent comes in and says, uh, you know, the the the five the three-year-old threw the ten-year-old's favorite toy down the bell, and we gotta get it back.
SPEAKER_04And those are things we can't keep. But other th other times um shops have their collections, stuff they got out of instruments.
SPEAKER_07Yeah, prizes, treasures, treasures.
SPEAKER_04Except for except for the except for the rodents. Those um, yeah. We nobody saves those.
SPEAKER_07So, Greg, do you want to tell them a little bit about the project that um I cajoled and asked and convinced and harassed you into doing um at Eau Claire? Oh, the cleaning? Yeah. That that part? Well, what were you talking about?
SPEAKER_03I wasn't sure.
SPEAKER_04I thought maybe I forgot something when you said cajole. Well, Phil and I have known each other for a little while. We've played off and on, and he he contacts me and he says, Hey, yeah, our college is gonna get an ultrasonic. Will you come help us? And they bought they bought the the granddaddy of ultrasonics. I mean it's like cool. And he and I we were just talking before, and I said, You still have it? You're still using it? And so he's taking good care of it. And he's so um we went through how to best use it and what what solutions to use in it, and and how to you know prepare instruments and what what to do and put them in there and scrub them and make sure they're clean when they come out and be safe, nobody gets an earache for a month.
SPEAKER_07Putting their hand in sound waves is not a great plan, but I know that Chris also um had a sauna cleaner in Sun in Sun Prairie. I mean, is that the type of thing you recommend for large school districts or universities? Or, you know, what uh I mean, I know it's a double-edged sword, but you know, what are some of the positives and the negatives? I mean, as you see the under you know, trying to do a project like that.
SPEAKER_04Um, if you it was great that you reached out and you want to know how to use it and how to best use it. And that was the best thing. I mean, I don't know if if you guys were around with magnets, rare earth magnets came around, and school districts are buying those. And they had no clue how brass responded to dents and how a strong magnet with a steel ball inside could maybe engrave the whole outside of the instrument without really understanding how it worked. So, and that that's a case where they nobody asked, you know.
SPEAKER_04I mean, they were well-meaning, but they super powerful magnet and no understanding how dense vents respond to to steel ball. So that that's an indication, you know, that's a situation where they should have reached out and uh some some did, but kind of after the fact. But it was great that you you asked, Phil. I mean, that that's the best thing, because we got plenty of work. I mean, we're not gonna if you can maintain your instruments and keep them, keep them clean and you know, and then send us the the worst thing, send them repair shop, the things that you can't do, and you know that they're gonna take more skill and more time.
SPEAKER_04Um but cleaning an instrument is just understanding, you know, how how to be careful of it and watch the heat on the lacquers and how to scrub and reach everything. And ultrasonics are great about reaching stuff. So um I think if somebody reaches out and and um and asks for help and advice, I I personally and you might hear it from from other technicians or other shops or something, but um, I don't I don't have a problem with that. I know there's there's lots of school districts around the country that have have done it too.
SPEAKER_07Yeah. I I think it um what I was cautious to do was um or what I would recommend doing is that if you know you're a school district or university that's interested in purchasing one and you have some student assistants to help you with the project, which is you know it's really important. You have to have like you gotta have some volunteers or some workers to help you with doing the cleaning. Um you want to reach out to your local um repair team to let them know that you're not trying to undermine them. Yes, you're trying to, you know, be cost effective with what you're doing with your instruments, but you want to assure them that you're gonna continue the your relationship, you know, purchasing instruments and doing repairs that you're not qualified to do.
SPEAKER_07Because I'm not.
SPEAKER_05And it's not repairing. I mean, that's a that's that's a different thing, right?
SPEAKER_07Um in most places, repair techs are so busy that they've got a wait list, you know, six months long on instruments. So they're they're okay with you doing that. But uh you always have to remember that those local people that are working in shops, that's your lifeline, and you can't jeopardize it at any cost.
SPEAKER_04Yeah, yeah, that's key. Yep. Yep.
SPEAKER_06And know your limits. Know your limits. I I won't admit to this, but I might have taken my wife's flute apart once when we were dating, because I was like, this is kind of cool. And look at all the parts. Um after a little bit of a reprimand, I put it back together pretty quickly. Yes, it is like IKEA. There's lots of but boy, did I learn. But yeah, no, look, know your limits. Do you find people doing that too where they just get a little, they think they're a little too uh smart or brave and they just yeah, yeah, yeah.
SPEAKER_04They should have stopped earlier and then they bring it to us and they it hurt something, yeah. We call them well-meaning and well-intentioned. We try not to make them feel too bad.
SPEAKER_05Yeah. That's good. So I mean, Greg try to make you feel not too bad about the flute. Oh, she made me feel bad. Very, very bad. Yeah, I still feel bad. Deserved it.
SPEAKER_04There's a lot of parts that have to go together just so. A lot of parts. Yeah, it's a good point.
SPEAKER_06It's yeah.
SPEAKER_07Uh um, Greg, I I yeah, whenever I picture you know your typical instrument repair technician, I I I you know frequently picture an introvert and someone who likes to spend time alone. And not talk to others. But I mean, you are the exact opposite. You like talking to people. You're social. You're man, I I uh it it it is the exact opposite of that. So you probably must have all personality types that want to, you know, uh work and repair.
SPEAKER_04Yeah, we do. And and and we we try to relate to the job, you know, it's it's nine months goes really fast. So we relate to what it's like on the job. And and I start right away, you know, get an idea of what kind of working environment you want. Do you want to talk to the customer? Do you want to interact with the band directors? Because there's jobs out there where they'll just feed you instruments and you you sit in the corner, your headphones on, you just focus and you do, and that's okay. Just know what kind of person you are and what kind of when you're going out there interviewing and going to to look at the jobs, you know, keep keep that in mind, what kind of worker you are and what kind of environment you want.
SPEAKER_04I like talking to the customer because especially on things that on used instruments, um, there's lots of things that a lot of nuances and and ways, cosmetic things that you can talk through with the customer and you know, well, this looks like this right now. We could do this or we could do this. Um, after we get cleaned, we'll we'll know better how it's gonna look. You know, the cosmetic stuff, especially. But then you can make um you can make recommendations to them too.
SPEAKER_04You know, I noticed you're using Vaseline in here. Honestly, that really doesn't work as the best loop, right? You know. Yeah.
SPEAKER_05So I can ask uh I like um often when I had students, I would, you know, they could rent an instrument or whatever, but they'd have a repair technician coming in um like on beginning band night. So they could bring in their clarinet from Aunt Roadie and they could take a look at it and say, yep, you can use this, it probably needs this or this, similar to what you're saying. Is that something that you'd recommend most school districts or people that start students is to have uh some sort of a relationship with their prepared tech that could come and offer advice?
SPEAKER_05Because if you start them on a broken instrument and then they're not successful, I mean it's pretty obvious that they're not gonna continue. But um, have have you done that a lot or do you recommend that?
SPEAKER_04Oh, definitely, yeah. And we encourage our students to do that too. It it builds a great relationship and a good rapport with the with the schools and uh band directors, and yeah, it's a win-win. Because sometimes they're pulling something out, they're putting a box strat out for a 10-year-old, you know. And it's like and it's it's well, my kid wouldn't. Well, no, it will be the other kids in the band room that don't know, and you don't want to infer, but you know, a 10-year-old with a box strat trombone, you know, just think about it.
SPEAKER_04So or a Power Flute or Yeah.
SPEAKER_07So, Greg, you have like a serious pro who shows up at your at your shop and hands you their prize possession, you know, their A, their A-game instrument, and you know that you are gonna have to take a hammer to this thing and do some serious, like serious deconstruction and reconstruction. Do you tell that person to leave or do you do that work in front of them?
SPEAKER_04Well, my shop doesn't have room for somebody to stand around and watch. So if they come to my home, they they drop it off. Or I meet them and they we meet somewhere, I pick it up, or you know, basically. Um if they come here to the school, um, I have had some people who want want to watch, and but sometimes I tell them to go shop or get a coffee or something. You know, some people can't handle see it, you know. It's like an operation. It's like, no, just take care of it. I'll be fine. And I'll see you see you in an hour.
SPEAKER_07Yeah, because I gave you my horn and I didn't want to be any nearer, anywhere nearer to you to see what you were gonna do to that slide. I I knew what you were gonna do and I didn't want to see it. Too scared.
SPEAKER_04When I wasn't in repair and and I was I was in college and and bringing my horn back to my dad, it was like I couldn't watch. I mean, just putting the valve back together, you have to tap down this this plate that that creates the bearing for the entire thing. I didn't understand anything about anything, you know. And he takes this wood dowel and he puts a hand and he goes, one yeah.
SPEAKER_03Like, uh he goes, Well, how do you think it's gonna stay together?
SPEAKER_04My dad was very dry and practical.
SPEAKER_07But yeah. All right. So, Greg, um, we usually do a speed round, but that's gonna be a little slightly different speed round today. Um I'm gonna give you ask like real world questions about repair, and then he's gonna get ready. No, I'm gonna give uh there's a bunch of scenarios here that are sort of maybe they might be like kind of worst-case scenario situations. And we're gonna see if Greg knows exactly what happened. It'll be like a who-done it um questions. Yeah, it's a little bit. All right. So band director.
SPEAKER_07Yeah, well, what happened exactly? This is sort of uh, you know, recre recreation, CSI instrument repair. CSI. Um that's good. That's a shirt. Okay. Forensics. Okay, all right. Uh so this teacher um was uh instructing junior high and uh was uh having their students clean their instruments and get prepared for an inspection. And a few days later, when the teacher got to the sax section, one of these old saxophones with satin sil with satin silver plating was covered with white powder on the pads and the body of the instrument.
SPEAKER_07What happened?
SPEAKER_04They tried to polish it. They tried to polish the silver plating, but with what? And didn't take the instrument apart. Oh, baking soda.
SPEAKER_07Close.
SPEAKER_04Comet. Oh no.
SPEAKER_02Oh yeah.
SPEAKER_06Well that's that's real. You can tell these are real. That's good. Oh, yeah. These are real, absolutely.
SPEAKER_05This is funny. This is like this is like watching an accident though on the side of the road. It's like yeah, okay, keep going.
SPEAKER_07Um a customer came into uh repair shop with a very, very curious uh situation. Uh uh trumpet with the pistons that would no longer go into the valve casings um at all. And uh the father just came and said, It seems like the the valves have been really sticky. And and I did some repairs on my own, uh, but it turned out the valves were uh at that point ruined. What do you think the father did to the valves?
SPEAKER_04I think he sanded them, sanded the surface.
SPEAKER_07Oh, we're giving you we're giving you uh uh points for that. Uh wire brush with it on a drill.
SPEAKER_02Oh no. Oh no.
SPEAKER_06I mean I know that happened too. Yeah, okay. Just just two more. Um these are real.
SPEAKER_04These are real, huh? Okay. All right.
SPEAKER_07They're from my band room. Um this is from a parent. Um my son is curious, he's currently using my old trumpet and marching band, and one day um his valves wouldn't move. Uh, he had removed one of the valves to oil it, and it would not go back in. Um, so uh I had the band teacher taken into the shop, and apparently was something was stuck inside the valves uh so that they wouldn't work. What was it that got stuck in the valves? This is just a generic one.
SPEAKER_04Uh we don't know why and how it gets spread around to use this, but a paperclip?
SPEAKER_07We're gonna give it to you, Bobby Penn. Bobby Pin. Perfect. Close enough. Wow. See?
SPEAKER_03Oh, they know they figure out it's the craziest thing. It's like kids like they take they pull a slide out and they stick, it's always a paper clip. You don't know why.
SPEAKER_04And so it gets in between the ports and the and uh the openings for the tubes on the casing, and they just lodge in there and it and it it hurts the casing and it really hurts the piston. They have no idea. It's it's usually mischievous. It's usually another kid. Oh, yeah, it's crazy.
SPEAKER_07Okay, this is the one.
SPEAKER_04Like they keep the time with their mouthpiece on the casing while the band director is working with the flutes, because they think a trumpet case, the the thicker the part, the harder the part, the wider the part, the stronger the part. They they have no concept of breadth.
SPEAKER_07So, yeah. We're almost done. Um uh student had a tuba that was brought into a shop with a cable hanging out of the bell, and the and and apparently the students had a little brother uh that threw something down the bell and they were trying to get it out. What did the dad do to try and get the item out of the tuba bell? And why was there a cable hanging out of the bell?
SPEAKER_04Cable.
SPEAKER_07He put a winch on it. Very cool.
SPEAKER_04Was he trying to use a uh one of the um a plumbing snake?
SPEAKER_07That's right. It was a rotor router. Tried to rotor the object out of the tuba.
SPEAKER_06Yeah, that's it.
SPEAKER_07Good. Nice. That's right.
SPEAKER_06I mean, yeah, uh, it's logical.
SPEAKER_05Oh, and then you know these are true because Greg has gotten nearly every single one of them. Absolutely. And has been not only in the ballpark, if you didn't get that it was comic, he was like Bobby Pin, how would you know that?
SPEAKER_06Right. That's just yeah.
SPEAKER_04That's the worst thing I saw, the worst thing I saw in a in a trumpet was a was an unspent bullet. And it was really scary because oftentimes we use ball bearings to dislodge stuff. And I just shuddered when that thing came out because I was bashing it against the against the back end. It's like all of a sudden it fell out of the case, and we all just stood there in the shop. We're like, okay.
SPEAKER_07That could have ended poorly.
SPEAKER_04Yeah. That could have, yeah.
SPEAKER_07Yeah, very poorly. Um okay, this is the last one. And this one really isn't like a uh who-dun it. It's a more like a uh a question. Uh the student trips on a sprinkler during marching band rehearsal and destroyed their bass clarinet. What question does this beg?
SPEAKER_06Why are you marching with a bass clarinet?
SPEAKER_07That's the exact question. That's right. Yeah. What is the base clarinet doing? Yes. Uh that's all I got for the speed round, Craig. You've done that's probably the most winning speed round we've ever had. And real.
SPEAKER_05We didn't just ask bad dad jokes. You know, that was good. Oh, I know you mean it's all real. True, because we've seen all of it. That was quality. Very impressive. Craig, it's great to meet you. And I'm so excited that Red Wing exists and uh sends out great quality students. We need more quality repair technicians in the world. There's just too much to be done. And uh so thank you for all you do uh in our state to help keep that moving. It's great.
SPEAKER_07My pleasure. Greg told Greg. Greg told me too that I mean, if you're interested in being a student at Red Wing, there's a wait list. So if this is something you want to do, uh it's not just you can't just get right in there. Um sometimes you got super popular. That's good. Yep. That's good. So I'd like to put Chris on the wait list right now.
SPEAKER_06Put me in. I'm in. I hey, I would do great, I would do anything to study with you. I can tell you, you are a fantastic teacher. Uh you would be a great mentor. Yeah. This is what an honor to meet you, sir. Plus, we need to get Chris out of his basement. Thank you.
SPEAKER_07Uh yeah, I have to say that when Greg came in and worked with me and the students at Eau Claire, that was a super awesome experience. I like your collection.
SPEAKER_04Asking me.
SPEAKER_07Yeah. Uh awesome. Yeah. Well, it try and forget the negative parts. That's what I try to do every day when I go to bed and I think about Phil. Forget the negative parts. Sleep it off. Thanks, Greg. Thank you guys. So, moral of the story? Comet.
SPEAKER_05Comet. Use more comet on your instruments, is the moral of the story. Greg was so cool.
SPEAKER_06Yeah, that was a good idea. Greg was so cool.
SPEAKER_05Fun. What a great like mix, right? An amazing musician who's you know, handsy, but then also able to like didn't want to teach, but really is a gifted teacher. And you know, and he just found his niche in a little better place. How cool is that?
SPEAKER_07Um just really patient. Like, and uh I th I think you know, he's really extroverted and like easy to like easy person to spend time with. Um, but his pacing, the the dude is a master of like teaching material in terms of like because if you go too fast with that kind of particular skill set, it's all over. You're done.
SPEAKER_05You could also if you wait too long, the next step doesn't feel, or like how you ask a question can lead their way. Oh yeah, so then now we do that again. Ah, right. Yeah.
SPEAKER_07But it was so funny because all of when we were doing the sonic cleaning train uh sonic cleaner training, all my students picked it up way faster than me. So it was like I mean, you play trombone. I mean it's like 10 steps behind the whole time.
SPEAKER_05And it became a quick so add water? A age matters, man. Age matters, yeah. Plug it in. How? I thought it was a sonic cleaner. Why is there why do I have water in the sound? Why is it ultra?
SPEAKER_06Well, my water that's a movie. How's it going? I will just say at Sun Prairie, we asked no one. We plugged that sucker in and it didn't even work. We had to load it back on the truck, take it back to Freeport, Illinois, where they said we said it doesn't work. And they said, Well, you need a buck booster. What? And we're like, I hit Mark Davison. I said, I told you we needed a buck booster. I'm like, what the hell is a buck booster?
SPEAKER_06But yeah, we're we were complete idiots. That was like 25 years ago, though.
SPEAKER_05We were wait, wait. A bunch of tubo players decided to do something and they found out they didn't pay attention or and all the stuff. I gotta write this down. That's so interesting.
SPEAKER_06You know how we found that thing? We were walking through the exhibits at Midwest, okay? And there was a guy who had this like silver looking thing. It wasn't like the big one, it was just on a table and had a big power cord, right? And it had water in it and like would vibrate and it's like he's like, hey, come here. I'm like, all right, what? Goes put your hand in there. Like, well, I'm not gonna put my hand in there. I'm gonna die. There's a power cord, and there's water. And he goes, No, no, no, put your hand in there. I'm like, okay.
SPEAKER_05Just and then he sold you a sonic cleaner.
SPEAKER_06Just it tickled, and it was like, okay. He did. It tickled. I was like, I'll take it. I'm in. Like, give me the big one. So, yeah, no, it was great. That was Do you take a bath in it now? No. Uh, yeah. In fact, that's my retirement gig. Uh, I'm gonna get a trailer. Uh Mark Davison and Joe Mesner are gonna get a trailer and we're gonna get an ultrasonic, put it on there, and we're gonna drive to people to schools and clean their instruments. But at the same time, I'm gonna have the Traeger and I'm gonna smoke some meat.
SPEAKER_06See, and then after school's over, you come to get the instrument and you'll have smoked meats, and the tuba quartet will play and life.
SPEAKER_05I actually think that is a brilliant idea.
SPEAKER_06It's a million dollar idea. Right there. That's what we're doing.
SPEAKER_05I mean, it'll cost you a million dollars, but you'll make like a million and one. And I think that that's better than your t-shirt ideas you've been having. We're gonna have so much fun.
SPEAKER_06It's gonna be fun.
SPEAKER_05You will have a lot of fun. That's why you will make a lot of money, but you'll have a lot of fun.
SPEAKER_06That's kind of like this podcast.
SPEAKER_05And you'll do something good for the world. You'll clean their instruments and then give them meat so that when they play it again, it gets dirty and they need you to come up. Kind of like kind of like the nonprofit, actually. Yeah, that's right.
SPEAKER_07Let me just reiterate that on this podcast, we are not giving any advice in regards to the safety uh and uh of anyone that is using said sonic cleaner. Uh please uh consult your professional when using a sonic cleaner.
SPEAKER_06Just put your hand in there.
SPEAKER_05So I didn't really say this because I was patient, which I know is rare. But I, in my first, my first day of teaching, Dan Lidberg handed me a clarinet and said it's broken. And I was like, Well, that's not my fault. And he goes, It's not my fault either. And I said, Well, I'm not who's I don't know how to fix it. He goes, Aren't you the band director? And I was like, Yes. I was 22. And I was like, so I spent three hours that night trying to figure out how to put a new clarinet to because I knew what I was doing. And about a month later, I'm like, I gotta fix this.
SPEAKER_05And I went to a shop in St. Cloud that we had a relationship with, right? Our local thing, and I just said, I need help with some like basic repair. And the guy's like, Great, come in on Saturday mornings, and literally was like, take that clarinet apart. And I was like, I I I don't want to break it. He goes, It's already broken, just take it apart. And then I took it apart. He's like, clean it. And I cleaned it, and then he's like, Here's how you put a spring on, put new springs on that. And he's like, Here's how you put pads on, and then taught me how to seed it, and I did one thing poorly that day.
SPEAKER_05And I came back six Saturdays in a row, and I learned so much. And he said the same thing, Phil, that you were saying. He was like, We get so much stuff I can't I can't stay above water. He gave me a mouthpiece truer, he gave me wedges for any woodwindow that I needed to reseat a pad, he gave me sets of pads, he gave me all the different layers of cork. He just said, just take it and fix all the easy stuff. And then I was able to go to the town, get in the local paper, this is last century, and say, bring out your instruments.
SPEAKER_05And he came down from the store and he wrote how much they were worth, and it was a donation to the school, and I repaired saxophones, clarinets, flutes, and then we had instruments for kids to like use when their instrument was getting repaired, or kids couldn't afford them instruments. I could just give them a clarinet. Smartest thing I did as a first-year teacher. It was it was so worth it. And I I didn't want to share that story when he was on because this is better. But uh how to repair an instrument is so important.
SPEAKER_07So curious. In your first year teaching, you did so many things right, and and now what has happened?
SPEAKER_05Well, I'm not telling you about all the things I did wrong, because you learned by experience, I believe, is what he said. But no, uh that's what I did. Anyway, I do a lot wrong now.
SPEAKER_06What do we got here?
SPEAKER_05Uh-oh.
SPEAKER_06You know who does things right? That's right, Paul Kyle with the answer to last week's buzzler.
SPEAKER_01John Philip Sousa once said, A march should make a person with a wooden leg step out. And our season opener, America Exultant, did just that. Perhaps showing a lapse in good judgment, much like the creators of this podcast, Henry Fillmore features the trombones throughout, along with a trumpet and drum motif and woodwind obligato. True to its patriotic title, the curiously unique and stirring trio section is built around the famous melody and unofficial national anthem, America, or My Country Tizothe, barked out by who else but the trombone section, bringing Fillmore's America Exultant to a triumphant and toe-tapping close.
SPEAKER_01Until next time, march on good commuters, and happy listening.
SPEAKER_05I'm just really glad that um the trombones were there to play that song because I've never actually heard a gig ever. Never been there. But I'm ready if you I might not show up, but I'm ready.
SPEAKER_07Paul Kyle has all the secret hidden in his band cloth.
SPEAKER_06And on the word choice, barked out. I mean, like man. He's got a we all knew that, right? Yeah.
SPEAKER_05He does play the euphonium. Yeah. Everyone plays a euphonium, they just don't know it yet.
SPEAKER_06That's a good point.
SPEAKER_05But he plays it well, which is saying Chris, exit ticket?
SPEAKER_06Um okay, let's uh for the exit ticket today. Great speedrun, Phil. Oh, my God. Really? Oh, yeah, that's the high water mark.
SPEAKER_07Oh I I I didn't know that it would be that that appreciated, but that's a great. Especially after mine last week. This was way better.
SPEAKER_05This is way better.
unknownYeah.
SPEAKER_06Okay. Let's let's leave with a regret. Uh let's go. Here we go. Uh Peter, give us a regret.
SPEAKER_05I regret saying yes to Beyond Artless five years ago.
SPEAKER_02That's good.
SPEAKER_06Beyond Artless is sponsored by Beyond the Notes Music Festival. Our mission is to create and provide profound learning and social experiences through music that go beyond the notes. Visit BTN Music Festival dot com to learn more.
Send us Fan Mail Commuters, buckle up. Phil celebrates Chris and Peter, which is awkward for everyone involved. Chris reveals the dangers of painting music stands without putting anything underneath them. Peter...
Send us Fan Mail Becca Arons has contracted ensembles for countless major musical stars - from the Eagles, the Who, Ed Sheeran, Snoop Dog, Cory Wong and Aerosmith to Andrea Bocelli, Stevie Wonder, Weird Al Yankovich,...
Send us Fan Mail What does it take to be a great leader? On this episode of Beyond ArtLess, Tobin Stewart, Symphony Orchestra Director and Assistant Professor of Music at Montana State University, joins us to talk about...
Send us Fan Mail Step right up! Test your knowledge about farming in LaCrosse, Wisconsin! Whoever can answer all the questions will immediately be sent all remaining Beyond Artless Season 1 overstock t-shirts. Shipping...
Send us Fan Mail What happens when deep commitment to music education, trailblazing pedagogy, and the pursuit of artistry come together in one remarkable career? You get Randy Swiggum, nationally recognized conductor,...