Skip to content
PodSubs
ShowsPeopleGuestsJobsNewsEvents
More
BlogPodCred
Menu
ShowsPeopleGuestsJobsNewsEventsBlogPodCredNetworksSign in
Join nowSign in
  • Shows
  • People
  • Jobs
  • News
  • More
    • Guests
    • Events
    • Blog
    • PodCred
    • Networks
    Join nowSign in

DIY Guitar Making

DIY Guitar Making artwork

Q&A | Customer Loyalty in Lutherie, Glue for Carbon Fiber Rods and More!

Nov 10, 202635 minAudio
ShareXLinkedInFacebookWhatsAppEmail

🪚 FREE: 8-part video course on building your first acoustic guitar, from my online course → https://ericschaeferguitars.com/free 🔴 Register for a Hands-On Guitar Building Workshop: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/ 🔴 Check out the Online Guitar Building School: https://ericschaeferguitars.com/course-directory/ 🔴 To commission an instrument from Eric: https://www.ericschaeferguitars.com/instruments-ordering/ 🔴 Check out the Radial Rosette Maker Jig: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/ 🔴 Donate and Support US Military Special Operators through the Art of Guitar Building: https://www.reveilleguitarproject.org/donate

Audio and video play straight from the show's own hosting. PodSubs stores and serves no media.

Transcript

From the show. Tap a time to play from there.

SPEAKER_01Alrighty. And just like that, we are live, ladies and gentlemen. Welcome back to another episode of DIY Guitar Making, where we're going to do a QA session, a regular Tuesday hangout. And so we're going to jump right into the members forum. The members forum is a private forum for members of the online guitar building school, which is an online course where you can learn to build your own acoustic guitar at erickschaeferguitars.com.

SPEAKER_01And you get access to this cool forum here where we're going to present some of the questions that or some of the dialogue that people are talking about right now in the members forum. After that, we'll jump over to YouTube and address some of your comments and questions there as well. And as always, the live chat is open. So if you guys are watching this live, go ahead and throw something in the chat. One, it just lets me know that the audio is working and everything. But also, hey, I'll address it.

SPEAKER_01Okay. I pretty much address everything that runs through the chat. Okay. That isn't spam. All righty. So uh let's get right into it. Jumping over to the members forum. Our first question, I believe, is about, yes, is about side bending, which is great because right before I went live here, I actually just finished bending up a set of sides of spess art oak, uh, which I hadn't I haven't worked that wood yet. I have cut up a whole bunch of this highly figured spess art oak, and it's the figure um that is always the worrisome part.

SPEAKER_01It's not necessarily the density of the wood, what you might think, um, as far as bending. It's the figure that can really screw you in the end when you're you know trying to bend sides. So anyway, um, I used super soft for the first time when I uh to soak the wood. And um I feel like it worked out really well. It felt like it did. Um, but uh we'll see when I pull it out of the bender. You never know. So anyway, he has a question. Carl Mills has a question about side bending here.

SPEAKER_01I think specifically about sidebending jigs. Carl writes, I am finishing up my sidebender jig. Everything is done except for the actual bending mold for each guitar type. I have a question though. The plans show the side bender just using half of the guitar side in the plans for the mold. However, when I look at the stomach bender molds, it appears that they extend the sides straight down a bit more than half of the guitar body. Maybe it just looks that way to me in the pictures, but it seems there might be value in doing that so that the spring-loaded slider can go a bit below half of the body to get a nice straight downward finish, finish to the bend on the sides at the top and bottom of the guitar body, with room for the slider to sit at the bottom without dangling over the edge of the mold.

SPEAKER_01Yeah, 100%. That's exactly why Stu Mac does that. Um, and it is a good idea if you when you're designing your own molds to extend it just slightly so that, you know, I think even just a half inch of extra area there so that you can extend the roller just slightly past. And even if you don't pull the roller down past the actual halfway point of your sides, maybe you just go right up to it. It still behooves you to have a little extra area on your mold just so that that roller isn't hanging right off of the edge there.

SPEAKER_01Um, you know, there's always a worry that it would actually go slightly below the edge and mess up your sides, right? I actually do this a little bit different. I design my molds, I make my molds to actually be an exact half copy of the guitar shape. And then I have these um blocks that I just position below the mold on both sides. And so when the roller comes down, it um is going to rest right on that block.

SPEAKER_01So it physically can't uh it physically has a stopping point. It's not, I'm not guessing sort of where the end is, if that makes sense. But either way, in either case, the point is just um uh account for the fact that you don't want that roller to uh go off the mold. Pretty simple. Okay. Great question, Carl. Um Patrick writes, what are your thoughts on using water thin CA glue to glue in carbon fiber rods in the neck?

SPEAKER_01Um, I don't think water thin CA glue is going to do anything to your carbon fiber rods. Isn't it's just it's not a structural glue. Really, any CA glue, cyanoacrolet glue, otherwise called super glue, is not going to really be structural. And if you think about what that glue is doing, it's supposed to hold those rods into place. And even with the rods, the neck is going to bow just slightly and give it that relief. Um, and of course, if things go south a little bit for you, the neck can bow even more or backbow or something like that.

SPEAKER_01And the point is um that glue isn't doing anything to hold the rod in place, I don't think, um, if that neck is moving at all. Okay, it's just not structural. CA glue is great for inlays and things like that, you know, just um or or doing small little uh chip-out repairs. Great for stuff like that where there's no structural element, there is no force, no tension, no torque or anything like that that is trying to um pull or push against the joint.

SPEAKER_01It's just just a fill of sorts. So, anyway, I wouldn't use CA glue. That's just my thoughts on it. Um, I think some people do use CA glue. They might have a different explanation for that. I don't know. Just giving you my take on it, I'm I'm telling you, I don't think it's doing anything. Um, epoxy is what a lot of people use because epoxy, um, you know, the problem with carbon fiber is it's not a woody, it's not wood, so it's not a woody material, it doesn't have pores or anything like that.

SPEAKER_01So um if you use wood glue, you're doing a wood to carbon fiber bond, and um the wood glue isn't really gonna, uh I don't think is gonna work there either. Um, so epoxy, epoxy is something that will glue wood to a uh non-porous surface like carbon fiber. And so I think that's what most people use is like a you know, your typical two-part epoxy. So try that out.

SPEAKER_01Okay. Uh let's see. Oh, Larry Kuhn. Let me pull this picture up here. Yep, I know who that is. Larry Kuhn writes, I'm in Denver for the week and was able to carve out some time and spend the day with this guy. And um, I think most of you guys, if not all of you guys watching this know who that is. It's kind of small on the screen. Um, although I guess if you're much younger in the craft, you might not, but that there is Robbie O'Brien.

SPEAKER_01It's funny, I remember when um when I was getting started out in this, and even when I first started making videos, there was just this guy, Robbie O'Brien, John Hall, and Tom Bills were the only people making videos in all of guitar making, or at least acoustic guitar making. Maybe uh the electric guitar world, I don't know as much about. I'm not sure when Crimson guitars, for example, started doing their thing, but um certainly in the acoustic guitar world, you just had Robert O'Brien, Tom Bills, and John Hall, and then me uh shortly after.

SPEAKER_01So um I was like the fourth or the fifth guy making videos. Now it's everybody has to make videos. If you're serious about um you know doing this as a profession or as a as an actual business, everybody makes videos of their process, even if maybe they're not speaking in the videos or instructing like I am, um they'll at least do these really fast, like uh fast motion shots of you know carving something and you know trying to make it really look cool.

SPEAKER_01But it's interesting. Yeah, everybody's um we we went from just four guys teaching the craft online in the entire world to um literally everyone has to show their process in order to stay relevant. It's um both uh sad in in on the one hand and uh kind of cool on the other, especially for you hobbyists who you know, you just get to see you get this like flood of of uh information and um cool videos to watch and content all the time from every angle.

SPEAKER_01Um, Carl Mills says, Hey Eric, hey, what's going on? I just answered your question just a moment ago. I'm not sure if you saw it, Carl. But um, yeah, when we're done on the live here, you can go back to the beginning and check it out. And uh yeah, welcome. Always glad to have you here. Um, so let's see. Then uh, oh, Patrick also shared, I thought this was cool and I wanted to bring this up. Uh, because you guys who watched one of my last videos on the newest guitar that I'm just getting started with right now, a big aspect of that new guitar is going to be um that I'm going to learn relief carving, uh, the kind of carving that you see on gunstocks.

SPEAKER_01And um also banjos, banjos do this as well. But um I'm actually kind of modeling after what I've seen on gunstocks. And uh Patrick, I guess he saw that video because he uh posted and wrote, I have a guitar coming from a friend that has been carved by another friend. It's an old harmony that's been living in a barn. And so that's cool. I mean, I'll take all the inspiration I can get. This looks pretty good. The heel carving looks nice. That's you know, that's the kind of skill I want to learn uh for my next next couple of builds is some relief carving.

SPEAKER_01Um, and there's different ways to do it with hand tools, or um, I think I'm gonna go for what a lot of gun stock makers do, which is they use a fordom tool to do all the um the fine detailed stippling between the carvings and everything like that, and the carvings themselves. Um it's just when you're doing really fine detailed work, the high RPMs that you get, super high RPMs on a fordom tool, uh, allow you to uh do that without chipping out.

SPEAKER_01So, anyway, thanks for sharing that, Patrick. Uh, I'm super excited about starting that build. Um, that's actually what the Special Oak that I was just talking about, that's what that is for, that specific build. So stay tuned for a lot of videos on that stuff, guys. Um, I'm gonna be doing lots of that relief carving stuff that I just talked about and also inlay techniques that I haven't done for many, many years now. I used to do a lot of inlay, and I I for whatever reason just haven't built recently haven't built um guitars that have a lot of that like thematic um visual display on them.

SPEAKER_01So I haven't had the need to do a lot of inlay. Uh plus I started making those really um unorthodox skinny headstocks that you guys have seen from me, and um I can't really fit inlays on those. So actually, for this next guitar, I'm doing a more traditional headstock design just so I can get more of a um uh visual display onto the headstock.

SPEAKER_00Okay, so uh let's uh go back to our questions here. I covered that.

SPEAKER_01Um let's uh let's jump over to I thought we had a little more here, but maybe I I might have forgotten to bookmark a couple things, but that's okay because we're gonna keep on rolling. We're gonna jump over to YouTube because there's plenty of questions over there. Um and like I said, if you have other questions, throw them in the chat. Just give me one second to pull up the appropriate screen because StreamYard does not make this easy. There we go. Okay.

SPEAKER_01All right, Railroad 555 writes At what point did you wipe off the leftover glue from the first brace? So this is on a really old video, uh side bracing video that I did like seriously a decade ago, like a long time ago. So I I I don't know exactly what he's referencing, I don't remember hardly anything about this video. Um, but I can guess. So I'll take it as a more basic question. Um, when you're gluing up multiple things like the side braces, you know, we're doing in my case 10 side braces, five on each side.

SPEAKER_01And um, at what point, if you're gluing them on just one after the other kind of fast, at what point what point should you stop and cycle back to the first one to remove the glue before it's too late? Um I'd say for side braces, every two or three is probably prudent. Uh, I get them on there fairly quick. And um essentially after maybe three minutes, the glue uh is going to tack up a little bit and become kind of leathery.

SPEAKER_01And it's actually easier to scrape that glue off with a dry stick when it skins over just a little bit. It'll come off nice and clean, it won't smear all over the place. Um, now, of course, if you're just glom gloming it on there super thick, uh, you almost can't help but make a little bit of a mess when you're cleaning it up, cleaning it up. So it always comes down to first of all, just figuring out how to do this without making a big mess. So that always comes first.

SPEAKER_01But yeah, just you go a couple braces and you cycle back before you forget. I always like to say if you're the kind of kind of person who forgets things easily and I kind of am, um, there's nothing wrong with sometimes I just clean them up every single brace, right? When I'm when I'm done one, I just clean it up right away as a matter of process, move on to the next one, clean it up. Yeah, it hasn't skinned over and become leathery. Um, but still, if if you didn't overdo the glue in the first place, it'll come off nice and clean, even if you pick it up right away.

SPEAKER_01So that's all. All right, Wahid Conversions. Conversions. Spot on advice, Eric, in service-based retail and artisan businesses like okay, this is about um uh customer loyalty. Uh, let's say it's about um guitar repair. Uh an old video I did on guitar repair and maintaining your customers.

SPEAKER_01In service-based retail and artisan businesses like Luthery, managing customer expectations around time and scope is half the battle. Quoting for the worst case scenario doesn't just protect your margins from hidden bench surprises, it naturally filters for clients who value craftsmanship over convenience. That buffer is what turns a standard transaction into a loyal repeat customer relationship. 100% exactly. That is exactly what I was talking about in the video and exactly how I um deal with repairs.

SPEAKER_01I don't do as many repairs as I did in the past because I do all the you know the teaching and the um guitar building. Um, and you got to kind of pick and choose what you're doing. But when I pick up a repair here and there, I always um I think of it as uh I am curating my own customer base. Okay. I'm not just I don't just want to get as many customers as I can because there are honestly a lot of bad customers out there. And I don't say bad customers necessarily like they're bad people, although there's that too.

SPEAKER_01There are bad people out there. Um, but just bad customers in that uh they're not right for you. Um, you know, if you especially if it all depends on what your brand is and what what you're doing. If you're running a high-end, like restoration repair kind of business, you don't want to get a lot of um electric guitar setups, right? You you just don't, it's it's gonna flood up your bench and it's gonna make it impossible to focus on those big restorations and things like that. So you really want to curate those customers.

SPEAKER_01Um, and then the customers that you are curating for into lifetime customers, you want to put all of your energy, all of that extra energy that you would be diffusing out to all these other setup jobs and little things like that. You can really focus on those customers and make them, you know, do extra things for them and make them extra happy. Anyway, uh I I think that extends beyond guitar making as well, right?

SPEAKER_01Any any business you might run where um you're not trying to uh make your money purely on volume of customers, right? You're you're you're more of a uh a high-end curated thing. Gurgle blaster. Okay, right. Wrap painter's tape over your fingertip uh when spreading the glue to avoid the splinters. It helps. Okay, thank you.

SPEAKER_01Yeah, that was on the video I did about um yeah, that makes sense. I could see how that would help. Uh I was uh gluing something up on a piece of Wengi, and Wengi is notoriously splintery, and also those splinters, when they get in you, man, they um can go septic and cause all kinds of problems. So uh Wengi is a fantastic wood, but um it can be a little bit problematic in that department. Super duper splintery. And so, even I think maybe in the video I was spreading glue on it and I caught a little splinter just from spreading the glue.

SPEAKER_01Um yeah, that's not a bad idea. You can wrap paint. I I don't think I have the uh foresight, the presence of mind when I'm starting a task to actually do something like, okay, I'm gonna wrap painter's tape on my finger, but um I'm I think I'm just uh I'm more of the type of person I'm just gonna dive right into it. And if I get a splinter, I get a splinter. But that is good advice. I do like it. Uh Greg Holmberg, Luatoia Matola, I can never pronounce that, has a website that will calculate saddle compensation.

SPEAKER_01Yep, I know that website very well. Uh, they have great calculators, not just for saddle compensation, but for neck angle and a whole bunch of other things. It's um, you know, we were talking about some of the OG uh Luthery influencers from from back in the day earlier. Um, this website that he's talking about, Louit Tao Matola, however you pronounce that, also is from ancient at this point, but it's still super relevant because um that guy just did some really fine work.

SPEAKER_01Uh he also wrote a lot of articles for um the Guild of American Luthiers, and um yeah, I don't think he gets enough praise for just putting that out for free. So, anyway, check out that website. Um yeah, Greg also writes, you enter the scale length, action, strings you're using, etc., and it gives you the movement of the contact point on the saddle for each string. Yep, that is a great uh resource. And um I'm pretty sure I've used that one before.

SPEAKER_01Uh, but I mean I've definitely used his website for other things. Oh, and by the way, that was for setting your intonation, if it wasn't, if that wasn't clear. Okay, West Creations writes, I've been dealing with some fantastic guitars that just aren't intonated correctly. So I have a so I have strongly considered this subject. Again, we're talking about compensated saddles. He writes, I've done some minor saddle adjustments, but to get the real sound, I'm gonna have to recut my bridge to support a wider saddle so I can fully compensate the thing and make it sound right.

SPEAKER_01Yeah, absolutely. Um, a lot of guitars have 332nd of an inch saddle thickness, and that is not enough width of the saddle to properly truly, if you're you know really um switched on to your intonation. I know there's a lot of compromises you can do. You can just do a straight saddle. Uh, a lot of guitars just have a straight saddle, some of them just have the B ramp cut into it because the B is the worst um offender for the intonation. So there's lots of variations here, but if you're really trying to do the full thing and get every string just so, just perfect, uh yeah, you need like I would say an eighth of an inch saddle at a minimum, uh, which is what I use anyway.

SPEAKER_01I always use eighth of an inch saddle so that I can do. Things like that. Um, and then he also writes, and that's kind of nuts because we're talking about a Martin D45, it's not exactly a run-of-the-mill guitar. Well, um, I get why you would say that, and you know, I I kind of agree, but also, I mean, it is a factory guitar, so I think uh sometimes we forget that about Martin. They make good guitars for factory guitars, and you know, give we gotta give them their due praise also for being first, essentially, not with guitars, but you know, with uh basically first with steel string guitars.

SPEAKER_01Um, so they have that massive heritage behind them, but at the same time, it is a factory brand, and um yeah, there's a lot of things that they just don't have a well-trained luthier sit down and spend two and a half hours working on one thing with those guitars, right? They're they gotta move them down the line too, just like other companies. Gotta make the margins.

SPEAKER_01Um, okay. Finally, a good explanation on how trust rod works. Yep, absolutely. That's what I'm here for. Um, okay, this is good. This is about my Radial Rosette maker. So I have a jig that which I sell at Ericsschaferguitars.com, um, that it's basically an all-in-one workstation where you can create your own modern style rosett with radial patterns and offset patterns right onto the jig itself.

SPEAKER_01Um, and so anyway, he writes when you router the final shape, how do you not cut into the base plate of the jig? Apologies if that if this is all obvious, I just couldn't tell by watching the video. No, that's a great question. And actually, I've gotten that uh several times before. You're actually supposed to cut into the base plate, it's made to handle that, and it's totally fine to do that. Um, I still use the first. Well, there's two generations of the jig.

SPEAKER_01So the first generation, I had a a jig, and I don't use that one anymore just because I updated the jig and made it better. But anyway, of the second generation, the mod the you know, current one, I still have the same one that I made like seven years ago. And every single time I make a rosette, I cut right into that jig. In a lot of cases, I don't even cut into anything because it was already kind of cut into the last time. It's still a lifetime tool, even though you on that last pass let the bit hit the jig itself.

SPEAKER_01Actually, in the first generation of the jig, I would cut out a trough all around so that you wouldn't cut into it, but it actually created more problems than it did help. And it and I realized in the end that it wasn't necessary at all. So I just dispensed with that, and now you just cut right into the jig. And again, that doesn't mean you're ruining the jig, and after five uses, you have to you know fix it or buy a new one.

SPEAKER_01Um, it'll still last you a lifetime. I I build guitars all day, every day, and um I'm still using the same jig that I made for myself seven years ago. Okay.

SPEAKER_00So yeah, if you're interested in checking out what that is, that's uh ericshaeferguitars.com. That's a nasty comment. Okay. Oh, here we go. We got, let's jump over to the chat.

SPEAKER_01Let's do that. All right, uh, Carl Mills writes, I just listened to the beginning of the feed. Thanks for answering my questions. Excellent. And then he writes, I am planning to do something similar to what you said you do. I made the first one. So he's talking about that first question, which was about um the side bending machine. And uh he was asking, um, should I build my mold for the side-bending machine to be the exact half shape of the guitar, or should I extend it slightly so that the roller can go slightly past that half point?

SPEAKER_01And the answer was extend it slightly. Um, which I don't do on mine, but I do something different that gets you to the same place. I am planning to do something similar to what you said you do. I made the first one exactly half of the body, but we'll add a three-quarter inch piece of plywood at the bottom of each, and that will hold the position. Yeah, exactly. That's sort of what I do. Um, except my thing is actually floating.

SPEAKER_01Uh I found that um if I fix something to the jig itself, which I had tried to do in the past, uh, when the sides, the the side sandwich, the veneer sandwich with the spring steel and the blanket, that whole thing, when that starts wrapping around as you're pulling it down with the roller, if you have a stop fixed in place, um if that sandwich tilts is angled off to the side just slightly one way or the other, you'll end up hitting.

SPEAKER_01You got to make sure that there's clearance enough that you're not going to accidentally be bringing that down onto the stop block, because then you it'll totally ruin your bend. You will just won't be able to complete the bend. Um, and so what I found to avoid that situation, I just have literally these like U-shaped blocks that I made, which are not fastened to the jig at all. And they just sit right next to it. So as I'm pulling the roller down to bend the last part of the side, I can actually just move the block to the right or to the left, just a hair, and um before uh to to make sure that the the um sandwich is clear of hit from hitting that.

SPEAKER_01Okay. Forward and backward position. I'm not sure what you're saying there, but all right. All right, so uh let's see.

SPEAKER_00Um I'm just looking at some of your other questions here.

SPEAKER_01Whenever I start these, I always pull a couple out to talk about, and then I just wing it for the rest. So yeah, there's another one about um on some of my guitars, I can tell the difference of compensation from saddle to the 12th fret, but not anything to consider redesigning the saddle. A fully compensated saddle would have to be cut on an eighth inch thick saddle. Exactly. So, yeah, that's exactly what I was saying before.

SPEAKER_01Um, he writes, I don't think there's enough material to compensate a 330 second thick saddle. I could be wrong though. No, Mike Ferguson, you are correct. You are correct. 330 seconds of an inch was not designed to be able uh to be cut into a um fully compensated saddle, it has to be wider. And I think an eighth of an inch is um, well, I know an eighth of an inch is wide enough. Okay.

SPEAKER_01And um do you do electronics? Um, not so much anymore. I can and I have, I have um, you know, I have the tools to do it. I have soldering iron and all that stuff, but um, I'm not the best. I'll put it this way: if you're looking for someone who's really good at it, there's a billion people who are better than me at you know, electric guitar, electronics, um, or even electronics on an acoustic guitar, you know, in the case of uh dealing with the the pickups and and things like that.

SPEAKER_01It's just not, you know, it's not it's not something that I've um specialized in being strictly an acoustic guitar maker. Okay, skyscraper guitars has the deal with Robbie to sell the Mortison Tenon Jig. It's really quite nice and it's third generation. You know, it's just talking to somebody else on the phone. It was like TCS, something like that. I think was the company name, and they now have the Robbie O'Brien Mortison Tenonjig.

SPEAKER_01Um, and they were actually gonna send me one out, but it never arrived here. So uh I'm not sure why. So if you know those guys, let them know that the jig never came. Um maybe skyscraper guitars also has it, though. Maybe now um he, you know, maybe he sold the rights to that to a couple different companies at the same time.

SPEAKER_01All right, in a follow-up discussion with Eric, he suggests starting with 2400 grit micro mesh and moving up through the finer grits. Yes. So that is about um finishing and uh specifically on true oil and for the final polish. I now I've done all sorts of things in the past and they all work okay, but I now prefer using micro mesh, uh, given that the one thing is you gotta start at 2400, I think. Um, and I'm not the only person that thinks that.

SPEAKER_01So if you start below 2400 at either the 15 or the 18, you are almost certainly going to sand through it, and it's just not necessary. So start at 2400 and go all the way up to what is it? Um 12,000, I believe, is the finest grit that they have in that set of uh micro mesh.

SPEAKER_00Okay.

SPEAKER_01All right, well, if um if that's all we got here today, guys, I'm gonna get back to um bending, back to the bending machines, because uh next I'm gonna use that super soft again, and I have to bend up some binding strips, which I just laminated with a uh nice bright orange blaze orange strip on the side, so I can get some really sweet-looking side perfling out of them.

SPEAKER_01And I'm interested to see, a little curious to see if the super soft is going to react with the glue in that veneer sandwich there. I don't suspect that it will because I haven't seen any um evidence online that that is the case. But um, you know, whenever you're trying something new, surprises can and will happen. So we'll see. Um, anyway, thanks for tuning in, guys. I got lots of lots of live streams I'm gonna be doing throughout this week.

SPEAKER_01I think I'm just gonna surprise you guys here and there and just go live um unannounced. Uh, it's a nice way to um just get more content out there and show you guys more of these processes without making it a big to-do as far as scheduling and everything else. So uh keep an eye out for that. And um if you like what I do and you get a little something out of the lessons that I teach, you can go to ericschaeferguitars.com. I just put out the 2027 schedule for my acoustic guitar build workshops coming up.

SPEAKER_01And um there's only three students in each workshop, so they fill up pretty quick. Uh, there's a whole bunch of dates I just put out though. So I think um there's lots of opportunities for you guys to get in there. I actually put out more dates than I normally do. Although, as the years go, as the year goes on um and those fill up, I might you know tweak the schedule a little bit, either add more dates or even remove some of those dates. But anyway, go ahead and check that out. Ericsschaferguitars.com.

SPEAKER_01Thanks for tuning in. I'll see you guys in the next one. Bye for now.

Open the transcript file

Hosts and Guests

Nobody is credited on this episode yet.

Credit the people on this episode

Be the first to rate this episode

More episodes

All episodes
  1. Q&A | Resawing Hardwoods, CNC Setbacks, and More!

    Oct 14, 202642 minAudio

    🪚 FREE: 8-part video course on building your first acoustic guitar, from my online course → https://ericschaeferguitars.com/free 🔴 Register for a Hands-On Guitar Building Workshop:...

    Credit the people on this episode

  2. Understanding Guitar Resonance | Part 2 | What is Sound?

    Aug 19, 202635 minAudio

    🪚 FREE: 8-part video course on building your first acoustic guitar, from my online course → https://ericschaeferguitars.com/free 🔴 Register for a Hands-On Guitar Building Workshop:...

    Credit the people on this episode

  3. Understanding Guitar Resonance | Part 1 | The Most Important Factors

    Aug 11, 202642 minAudio

    🪚 FREE: 8-part video course on building your first acoustic guitar, from my online course → https://ericschaeferguitars.com/free 🔴 Register for a Hands-On Guitar Building Workshop:...

    Credit the people on this episode

  4. Q&A and Final Reveal of Guitar #116

    Aug 4, 20261 hr 10 minAudio

    🪚 FREE: 8-part video course on building your first acoustic guitar, from my online course → https://ericschaeferguitars.com/free 🔴 Register for a Hands-On Guitar Building Workshop:...

    Credit the people on this episode

  5. Q & A and Nut Slotting on Guitar #116

    Jul 28, 20262 hr 37 minAudio

    🪚 FREE: 8-part video course on building your first acoustic guitar, from my online course → https://ericschaeferguitars.com/free 🔴 Register for a Hands-On Guitar Building Workshop:...

    Credit the people on this episode