Wrong Speaker Labels in Your Podcast Transcript? How to Fix Them
Speaker detection splits one guest into two people and merges two hosts into one. Why diarization fails, and the exact label fixes in Descript and Castos.
By Don karlos Fru ยท Published 2026-10-29
Every podcaster who publishes transcripts has opened one and found the wrong names on the lines. The guest is labeled Speaker A for half the episode and Speaker B for the rest. Your co-host's jokes carry your name. One speaker in the file is a person who does not exist. This is a diarization problem. Diarization is the step where software decides who spoke each line, and it is a guess made from voices, not a fact read from the recording. The good news is that the labels are editable data. Fixing them takes minutes once you know where the rename tools sit.
QUICK ANSWERFix speaker labels inside the transcript editor, not by re-uploading the audio. In Descript, speaker labels can be added, moved, renamed, replaced and removed, per its help center. In Castos, open the episode, choose Edit, then Transcript, then Rename Speakers, type the real name or pick a Host, then choose Replace Names and Update. If the service split one person into two speakers, rename both speakers with the same name and the transcript reads as one person.
Why the labels come out wrong
Diarization works from the sound of voices, and voices mislead it in predictable ways. Two hosts with similar pitch get merged into one speaker. One guest gets split into two speakers when their voice changes across the recording, after a break, on a different microphone, or when they move from laughing to speaking quietly. Crosstalk is the third common cause. When two people talk over each other, the software has to hand the line to someone, and it often hands it to the wrong person or invents a fresh speaker for the overlap.
Recording conditions decide how hard the guess is. Guests on laptop microphones in echoing rooms give the software very little to work with. A remote guest whose connection drops and rejoins may come back sounding different enough to be labeled a new speaker. None of this means the transcript is ruined. It means the labels need a human pass, which is what the rename tools are built for.
Editorial image from this article.The fix in Descript
Descript treats a Speaker as a label that identifies who is talking in a project. Its help center states that labels can be added, moved, renamed, replaced and removed, so every standard error has a matching repair. Rename a label when the software has the right person under the wrong name. Replace a label when a stretch of lines belongs to a different speaker than the one marked. Remove a label when the software invented a speaker who is really one of the existing voices.
Descript draws one distinction worth knowing. Project Speakers live inside one project, while Drive Speakers carry across a team's work. Setting a regular co-host or a recurring guest up as a Drive Speaker means their label is ready in the next project instead of being rebuilt each episode. There is a second reason to label carefully. In Descript, assigning a voice or an avatar to a speaker label is what enables speech generation and avatars for that speaker, so clean labels are the foundation for any AI voice work you do later.
The fix in Castos
Castos writes its automatic transcripts with generic labels, Speaker A, Speaker B, Speaker C and onward. To fix them, open the episode in Castos, choose Edit, then Transcript, then Rename Speakers. Type the correct name for each speaker, or select one of your saved Hosts, then choose Replace Names and Update. The transcript republishes with real names on the lines.
Castos documents the split speaker case directly in its support guide. If the transcription service split one person into two speakers, rename both speakers with the same name. The two labels collapse into one person in the published transcript. One limit to know before you hunt for the button. The Rename Speakers option does not appear on single speaker transcripts, because there is nothing to rename. Solo episodes will not show it.
Transcripts you bring from somewhere else
If you upload a transcript made by another service into Castos, the file has to follow a format the editor can read. Castos specifies the pattern of a timestamp in brackets, the speaker name, a colon and the line of text, as in the shape [00:00:05] Speaker A followed by what was said. A transcript that arrives as one block of unformatted text cannot be relabeled by speaker, because the editor cannot tell where one speaker ends and the next begins. Format the file before upload and the rename tools work on it like any other transcript.
Fix labels before anything downstream
Speaker labels are not cosmetic. Show notes drafted from a transcript inherit its names. Chapters built from the transcript put the wrong person on segments. Search engines index the transcript text, so a mislabeled episode puts wrong attributions into the searchable record of your show. Quotes pulled for social posts carry the label with them. The cheap point to fix all of it is the transcript itself, right after it generates, before any of that downstream work starts. Read the first exchange of every interview, spot check the middle, and fix the labels while the recording is still fresh in your ears.
Clean transcripts make the episode work harder everywhere it travels, including the page where your listeners become subscribers. PodSubs gives podcasters that owned line. Claim your show on PodSubs and turn the listeners your episodes earn into email subscribers you control, on a page that also carries your news, your events and your back catalogue.
The rule to remember
Labels are a guess, and the guess is yours to correct. Rename wrong names, replace wrong stretches, merge split speakers by giving both labels the same name, and do it in the transcript before show notes, chapters or clips are built from it. Ten minutes of label work protects everything the episode publishes afterward.
Frequently asked questions
Why does my transcript show the same guest as two different speakers?
Diarization guesses speakers from the sound of voices. A guest gets split when their voice changes across a recording, after a break, on a different microphone or after a connection drop. The fix is to rename both speaker labels with the same name, which Castos documents directly in its support guide.
How do I rename speakers in a Castos transcript?
Open the episode, choose Edit, then Transcript, then Rename Speakers. Type the real name for each label or select a saved Host, then choose Replace Names and Update. The Rename Speakers button does not appear on single speaker transcripts.
How do I fix speaker labels in Descript?
Descript treats a Speaker as an editable label. Per its help center, labels can be added, moved, renamed, replaced and removed inside the project. Regular voices can be kept as Drive Speakers so the labels carry into future projects.
Can I fix labels on a transcript I made in another app?
Yes, if the file is formatted so the editor can parse speakers. Castos requires the pattern of a bracketed timestamp, the speaker name and the line of text for brought-in transcripts. Unformatted text blocks cannot be relabeled by speaker.
Why do speaker labels matter if the audio sounds fine?
Show notes, chapters, search indexing and social quotes are all built from the transcript text. A wrong label in the transcript puts a wrong attribution into every one of those outputs, so the transcript is the cheapest place to fix it.