Skip to content
PodSubs
ShowsPeopleGuestsJobsNewsEvents
More
BlogPodCred
Menu
ShowsPeopleGuestsJobsNewsEventsBlogPodCredNetworksSign in
Join nowSign in
  • Shows
  • People
  • Jobs
  • News
  • More
    • Guests
    • Events
    • Blog
    • PodCred
    • Networks
    Join nowSign in

Volts

Volts artwork

The transformative potential of solid-state transformers

Nov 4, 20261 hr 32 minAudio

This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit www.volts.wtf/subscribe Power electronics have taken over almost everything in our lives, with the exception, oddly, of the power grid itself - it is still held together by tens of millions of analog, iron-and-copper transformers, the design of which has barely changed in a century. Solid-state transformers replace the dumb gray box with something that can monitor and steer power or convert it from AC to DC and vice versa. In this episode, Enphase co-founder Raghu Belur, who built his company by dividing big solar inverters into thousands of small ones, explains how he’s trying the same thing with transformers, why AI data centers and big solar and battery projects are the first markets, and what it would take to put a smarter transformer on every pole. Chapters: 00:00 - Introduction 03:02 - What a transformer does 07:53 - What conventional transformers can’t do 11:43 - What makes a transformer solid state 15:27 - How much is software, how much is hardware 19:40 - Why power electronics hasn’t reached the grid 23:54 - Enphase’s distributed approach 31:23 - Building transformers from 5-kilowatt modules 34:58 - Copper, gallium nitride, and supply chains 43:44 - Cybersecurity 47:23 - Data centers and 800 volts DC 59:29 - Solar and battery storage 1:05:18 - The cost question 1:07:02 - Neighborhood transformers and the utilities 1:15:37 - Efficiency, lifespan, and heat 1:22:24 - Handling grid faults 1:25:27 - Standards, policy, and the next few years

Audio and video play straight from the show's own hosting. PodSubs stores and serves no media.

Transcript

From the show. Tap a time to play from there.

[music]

SPEAKER_00All righty. Hello, everyone. This is Volts for November 4, 2026. The transformative potential of solid state transformers. I'm your host, David Roberts. Electricity moves long distances at high voltage, which is efficient. It gets used at low voltages, which is safe. Transformers are what step the voltage up and down along the way.

SPEAKER_00Every bit of power you use has passed through several of them. The basic design of a transformer, copper coils wrapped around an iron core, has barely changed in a century. The vast bulk of the Transformers on the grid today, including the gray boxes on the top of poles that you see all around your neighborhood, are cheap, sturdy, and dumb as a box of rocks. Right now, the U.S. can't make them fast enough.

SPEAKER_00It takes years to get one. Engineers have long talked about replacing conventional transformers with electronics. A solid state transformer, mostly made of transistors, would be smaller, could handle DC as well as AC power, and could actively monitor and manage the power flowing through it. The catch has always been cost. Nobody needed a smart one badly enough to pay five to ten times the price of a dumb one.

SPEAKER_00That is changing, and the two markets driving it make a somewhat awkward pair. One is solar farms and big batteries, which produce DC power. The other is AI data centers, which want more DC power inside their buildings and will pay almost anything for speed. The long-term prize, though, is not the big transformers at data centers. It is the little ones in local communities, the gray boxes on poles. Where rooftop solar, EVs, and heat pumps are complicating matters.

SPEAKER_00It's all surprisingly fascinating. My guest today, Raghu Belour, co-founded Enphase, which broke up big solar inverters into tons of smaller ones to be tucked under each rooftop solar panel. Now he's trying something similar with transformers, creating small modules that can be Lego'd into medium or large infrastructure. Let's get all into it. All right, then. With no further ado, Raghu Belur, welcome to Volts.

SPEAKER_00Thank you so much for coming.

SPEAKER_01Good morning, David. Thank you. Thank you for having me. Super excited to be here.

SPEAKER_00I am excited to get into all this. Let's assume listeners also have liberal arts degrees like me and don't necessarily know a lot about transformers to begin with. Let's just start with the basics of what a transformer is. Why do we have transformers all over our grid? And what are they doing? And how are they doing it? Conventional transformers.

SPEAKER_01Got it. I think it goes back 100 plus years when the first the grid was kind of conceptualized. I think the U.S. grid, I consider it to be a 20th century marvel. And I think it's done amazing things for us. Delivered power, energy, energy drives economies. And you see how the U.S. has done. But I think we also have to be cognizant of the fact that nothing remains static in our lives, right? Everything changes, everything evolves.

SPEAKER_01And that's the one thing that I see that the grid hasn't really done as well is evolve with the times, especially in terms of the technology evolution. So when power was first generated, they were all done very locally and they were all microgrids at the time. And then when people realized there is a lot of value in tying different generation and loads to Together, you can actually make the system much more available,

SPEAKER_01much more reliable. And so they started connecting all of these microgrids together, and they used really sophisticated control structures like primary systems. But one of the core elements, and you mentioned this, of tying these microgrids together and has got farther and farther apart as the power generation plants became bigger and bigger and the And as the loads became farther and farther away, you had to find a way to efficiently transmit these electrons

SPEAKER_01from where the generation was and where the load was. And you saw as generation became bigger. It started to move them farther and farther away from city centers and where people were living. And so you needed to move those electrons efficiently. And the transformer was one way to do it where you generated at a lower voltage, then you boost up the voltage. And when you boost out the voltage, the amount of current for the same amount of power that the wires have

SPEAKER_01to carry is very low and the losses in wires goes as a square of current. So I squared R are the losses. So if I can reduce the current, I reduce the losses to a lower level and I consume it at the other end. So everything was great.

SPEAKER_00The analogy I always hear is that if you analogize it to water, a current is the amount of water going through and voltage is the water pressure. So at the beginning of the journey, you increase the pressure basically so that it will flow longer, but you can't let it come into your house at that pressure because it would So they have to lower the pressure before you put it into houses, basically. And transformers are boosting the pressure and then lowering the pressure, basically.

SPEAKER_01MR. Lowering the pressure. That's exactly what they do. And they do it extremely well, right? Transformer that has been there for 100 plus years take AC. And by the way, this was the other debate DC versus AC and we all converge around AC and traditional transformers by definition are AC or alternating current that moves at 60 Hertz, right? And so you boost up the voltage.

SPEAKER_01You reduce the amount of current that you have to push is very, very small. And then when you step it down, you have all that power available. And so here was something that's been a workhorse for 100 plus years. It's very reliable. It's very efficient.

SPEAKER_00And so the question is- Well, yeah, I mean, it's worth saying, because this kind of blew my mind as I was looking into it. It's just a piece of iron, a rod of iron with two copper wires- Right. Wrapped around it. One sort of takes the high voltage, does something with the magnetic field that is transferred to the other copper wire. We don't have to get too far into it. But the point is, it's very analog and very simple and cheap and durable, which is why they've worked so well for 100 years.

SPEAKER_01Absolutely right. And they've been efficient, they've been cost effective, and they've been reliable. So why change? Hey, there was nothing wrong with horses and buggies either, but we didn't stay with them. We moved because that's part of the modernization of our lives.

SPEAKER_00Before we move on to what a solid state transformer is, let's just quickly say like what a conventional transformer can't do, right? It can lower the voltage, but what can it not do that you might want a transformer to do?

SPEAKER_01So another way to think about it is it does one thing and it does it very, very well. So it takes AC in and puts AC out at different voltages and does it very, very well. The things that it doesn't do is... Transform to different voltages. So for example, can I get AC in and generate DC out? Can I take DC in and generate AC out? Can I take DC in and generate DC out at different voltages, different frequencies?

SPEAKER_01The second thing it doesn't do is this is kind of the next level of detail if there is noise in the system, for example. We are now encountering different types of loads that we hadn't encountered before things happened. Like data center is a good one, right? Where the load fluctuates a lot and generates a lot of what are called harmonics. Can you, in a traditional transformer, all that is just passed through? It is blind to it. So those are some of the limitations of the traditional transformer.

SPEAKER_01However, let's take a step back, right? Why, again, move away from horses and buggies? I think the big picture is, If you look at how lives have evolved, loads have changed, right? Historically, it's all been centralized, right? You have big generation plants, then you have transmission, distribution, and your house is a load, and it's a simple consumer of energy. But over time, what's happened is we have evolved to where we have become prosumers of energy.

SPEAKER_01So we have started installing solar on our homes. We produce our own energy. We have batteries. We store. And a lot of times we push energy. Back into the grid as well. So it's no longer a unidirectional power flow. Now the power flows become completely bidirectional, right? So now the demand on how the system operates needs to evolve. So bottom line is that The grid needs to modernize and they need to modernize by adding more intelligence into the grid.

SPEAKER_01One of the limitations of the traditional transformer is it is not very intelligent. So if you can add more intelligence, Remember, I've not talked about SSD as yet. Let's put that aside for a moment. I just need to increase the intelligence of the grid, which means can I control my power flow more efficiently? Can I monitor my power flow more efficiently? Can I collect... Just significant amounts of data on how the system is behaving. Think about this as a complete system of centralized generation, consumption,

SPEAKER_01as well as distributed production, right? If I can be very aware of everything that's going on, every Electron that's being generated, consumed, and electron flow. If I can do all of that very effectively, I can make the grid far more efficient. You know, it's dangerous to say, oh, I'm going to increase the utilization of the grid because your grid is underutilized. There's a danger of averages there. But nevertheless, there is something that can be done without adding.

SPEAKER_01The brute force approach would be, let's add more and more and more generation. We should do that. We should do that, but we should also make the whole delivery and management of power flow far more efficient. There's an opportunity to do that. And that's where you start thinking about, how do I do that?

SPEAKER_00Right. So let's talk then about what a solid state transformer is. And as I understand it, there's been a lot of This idea of making a more intelligent device goes back a ways. And the terminology has shifted somewhat over the years. I think people sort of converged on this term solid state transformer. But just tell us, you know, if the old transformer is a piece of iron with two copper wires wrapped around it, what is a solid state transformer? What makes one solid state transformer?

SPEAKER_01You know, McMurray, I think, in 1970, I believe, was the first patent they filed around what is truly the modern solid-state transformer. Basically, it is an electronic transformer. Instead of relying on traditional copper and iron only, you do this through modern electronics, through semiconductors, through wide bandgap devices like silicon carbide and gallium nitride. You operate the converters at much higher frequency.

SPEAKER_01So I can go from Any voltage to any voltage, any type of voltage to any type of voltage, and everything in between. And I get to monitor very carefully. I get to control very carefully how the power flows from input to output or output to input because all these devices can be made fully bidirectional. So I'm just adding that intelligence.

SPEAKER_00I don't want to get too deep into this, but let's just dwell for a moment on what's happening inside this thing. And again, loosely, I would say is how I understand it. But as I understand, basically, the transistors are chopping the power up. Into much higher frequency. And then once you have a much higher frequency, you need a much smaller transformer, basically. So there's still a transformer in there. It's just very, very small relative to conventional transformers because you don't need as much sort of the iron amounts to storage.

SPEAKER_00You don't need as much storage if you have super high frequency. I don't totally understand what that means, chopping up the power, but is that... Is that a roughly, roughly accurate? Okay.

SPEAKER_01That is exactly what it does. In the case of when, if you're taking AC in and generating DC out, it's actually a rectifier. I take AC and chop it up and I make it into flat DC output, right? But what you explained is exactly what it is because I'm running it at much, much higher frequency. The traditional transformer is called a line frequency transformer. That's a 60 Hertz transformer. And that's why it's so large. If I can run the frequency Much higher, say 10 kilohertz. And in the case of Enphase, hundreds of kilohertz.

SPEAKER_01Then my size of my transformer shrinks. So that's one. The second thing that I can do is I don't need to process the entire power of a transformer in one block.

SPEAKER_00Mm hmm.

SPEAKER_01I can make small repeatable blocks, stack them intelligently, right? And then that way each piece of electronics is only processing a small amount of power. And they're different. Different people have different approaches. You can, for example, build a 5-megawatt transformer with, say, a 100-kilowatt power converter. Or, in other cases, Enphase is an example, where we may do it using 5-kilowatt building blocks.

SPEAKER_01But it's just a different approach. But what you do is those two things, where you run at much higher frequencies, the transformer itself, the galvanic isolation, or the transformer itself, shrinks. And I can also break it down into smaller chunks.

SPEAKER_00So these things are smaller and smarter. One of the questions I got kind of from the audience when I threw this out there is each of these modules that we'll get into later has a chip in it. So they all have little tiny computers in them. So they're programmable by software. So one of the questions is how much of this is software controlled and how much is limited by physical materials? In other words, if you have a transformer that's attached to, I don't know,

SPEAKER_00a solar field, could you pluck it out and go attach it to a data center and just program it differently? You know what I mean? How much of a range does the software get you versus you have to build different physical transformers for different physical tasks?

SPEAKER_01Yeah. So, you know, again, it depends on the approach that you take. I'll give you the end phase view of it, if you may. You know, any modern electronics today has microprocessors or microcontrollers built into it, right? That's what they rely on. And by definition, when you have a microcontroller... You can run more sophisticated control algorithms in there. And all of that is done in firmware. All of that is done in software. You're monitoring a lot of inputs, outputs,

SPEAKER_01as well as all the control parameters that are You can look at what happened. You can do diagnostics on one, if a failure were to occur. This is the part that I was talking about, where you're adding a lot of intelligence. You're adding a lot of software. And when you make it, when you rely heavily on semiconductor and software, that's exactly what Enphase has done over its last 20 years. When you rely heavily on software and semiconductors, a few amazing things happen, right? Semiconductors and software, if you look at The technology history,

SPEAKER_01if you look at smartphones, if you look at your laptops, etc., they continue to improve and increase in performance over time, and they don't asymptote in cost. Unlike copper and iron, where they become incompressible, right? I mean, copper and iron is copper and iron. I mean, I buy them by weight, whereas I can, because of semiconductor integration, because of software, I never slow down my trajectory for cost reduction,

SPEAKER_01increased reliability, and increased performance. This was the core premise of how Enphase started. Those big box inverters or a lot of copper and iron in them. Instead of making power devices, let's make power electronics because power electronics is better in cost, better in performance, better in reliability and doesn't asymptote those functions.

SPEAKER_00I wrote a whole post about this once many years ago. I should dig it up. But this is sort of characteristic of the whole Clean energy transition. A lot of what's happening in the clean energy transition is substituting intelligence, substituting computing for materials, basically. And this gets you around the limitations of materials, the physical and the sort of supply chain limitations of materials. You're just using intelligence instead. And intelligence you can increase.

SPEAKER_01Over time.

SPEAKER_00Forever.

SPEAKER_01Yeah, you know, transistors cost FEM2 dollars, right? So you can add more and more compute in them. We have shown that. But there are some fundamental physics that you just cannot get around, like the thermals, right? Right. I mean, I'll never be 100 plus percent. Yeah, sure. But I can get to 98 .5%, 99 % % efficient, I still have a percentage of loss.

SPEAKER_00Yeah, sure.

SPEAKER_01I still Have To Manage That 1 % Loss or 1 .5 % LOSS is all in heat and I Still Have To manage that Heat so there Is Some Physical Limitation that I Won't Get Over but All Of Those Are Also Workable Problems because I'm Not Stuck In this copper and iron world where I can't do a whole lot, I can do significant about it.

SPEAKER_00Well, let me ask on that front, like when you start thinking about it, it's very striking that power electronics has sort of moved into everything around us, in our cars, our phones. Power electronics has sort of taken over everything except the grid, right? Which is striking, I think. What is your explanation for why power electronics rule everything around us except for the sort of foundational infrastructure that we use to distribute electricity?

SPEAKER_00Why has the grid been so resistant and so slow? What makes solid state transformers sort of viable today where they weren't, you know, yesterday?

SPEAKER_01Yeah. Again, like I said, the grid is a marvel of the 20th century, but it hasn't evolved. It needs to evolve. Everything in our lives, you nailed it. Everything in our lives revolves around power, power management, power electronics. Look at our future, right? As we move into the world of physical AI. What do these robots need, right? They all need batteries. They all need power. Look at satellites. Look at every aspect of our lives. We are relying heavily on power electronics. I wear a smartwatch.

SPEAKER_01I carry a smartphone. Everything relies on power, power electronics, and power management. And it's just amazing. Because things are far more efficient. The old watches used to do one thing, whereas my smartwatch monitors my health in real time, right? It is amazing how much data it collects.

SPEAKER_00I guess the question is, has that revolution not reached the grid for some sort of physical reason or some sort of technological reason? Or is it just institutional? Do you know what I mean? Social and political. Like, why hasn't it taken over the grid yet?

SPEAKER_01I think it's a combination of things. First, it is institutional, right? The grid tends to think in changes that occur a little bit more slowly because the grid needs to be very reliable, right? We heavily rely on making sure that those electrons are delivered to our house all the time. They're delivered inexpensively and safely and cleanly. I think that the grid has to evolve because the world is evolving around it much, much faster than the rate at which the grid is evolving.

SPEAKER_01I mean, look at things like, look at the loads are changing. We just talked about it. I have two EVs at my house, you know, and I want to charge whenever I want to charge. And, you know, we are going to be releasing a bidirectional EV charger. Now, my EV is not just a consumer. It can also feed energy back into the grid. Right? We have solar. We have batteries. We can control how we consume our power. We're just driving so much intelligence to the home. That's the notion of a distributed architecture.

SPEAKER_00Right?

SPEAKER_01However, everything in between... Unity tends to be not very intelligent. So the grid is evolving at a rate that is significantly slower than the world around us that's evolving, right? Like we talked about physical AI, robotics, everything is coming around. It's just around the corner from us. And we need to evolve our grid as well. And it has to evolve faster. So it's a combination of Technology adoption and some institutionalization

SPEAKER_01of the way the grid is. It's just the way it is, but I think it's more... Look at climate change. Look at fires here in California as an example or fires actually all over the U .S., and we have to deal with hardening of That's why we started Enphase. We looked at it and said, wow, the grid hasn't evolved at the rate at which our lives have evolved. And what can you do about it? Obviously, we were not going to go out there and start a company that would attack that problem out of the gate. We said, let's think about distributed architectures because we know they always win

SPEAKER_01in the long run. In network parlance, I always say push intelligence deeper into the network, let the endpoints You're speaking

SPEAKER_00my language now. So let's talk about this distributed architecture. So there are lots of different companies popping up right now, we should say, in this space, trying to make different versions of solid state transformers. You know, as you say, The need for this has sort of come up relatively suddenly, but very pretty intensely. So there's a lot of people responding. Your approach is somewhat unique in that it is a distributed architecture. So you're chaining together small repeatable modules rather than building structures.

SPEAKER_00So talk maybe first, just very briefly, about how you applied that philosophy to inverters. That's how you got started, is in the solar inverter field. And then how that same philosophy transfers over to transformers.

SPEAKER_01I do a lot of thinking, as you can imagine, for my job. That's part of my role is one of the dangers of if you have had success in a certain field is, you know, as they say, if you're a hammer, everything looks like a nail. You don't want that. You overlearn.

SPEAKER_00You overlearn some lessons.

SPEAKER_01Precisely. I'm very introspective about this, and I always step back and think about, hey, is this the right approach to solving a problem? First and foremost, clearly, what problem are you solving? You always start there. And what's the right approach to solving the Problem, a bit overused, but always thinking about it on a first principles basis. So distributed architectures is something that I'm very strongly believe in. And so it was very clear in my mind that when we were going to solve this SSD problem, solid state transformer problem,

SPEAKER_01we said we must do it using a decentralized or a distributed approach because there are three things that happen when you're distributed. Over the long run, you get better cost, better performance, better reliability. And so what did Enphase do? Enphase really, over the last 20 years, and we have shipped about 30 plus gigawatts of power electronics for solar, for batteries, and now for EV chargers. To put a finer point to it, we have shipped 90 million microinvirtors today, right?

SPEAKER_01We are making millions a quarter. So what have we done? We have really architected a piece of power electronics design or architecture that is, I'm going to get into a little bit of detail, it's called single stage, very high frequency using what's called predictive control. We really don't have a... Traditional, boost it, PWMA, chop it up, feed it back, look at error, and then converge.

SPEAKER_01We don't do that. We actually run a mathematical model of the converter within our own chip. We build our own async, run it in there. It's very, very fast. We calculate our control vectors in nanoseconds, and then we predict what the output needs to be. And as long as it's in the safe operating area, We go, that is the right output. And that's how we get fantastic response time. So just to, apologies for the words that I'm using here.

SPEAKER_01Single stage, very high frequency from 250 to 500 kilohertz using predictive control. And all the controls is on our own custom chip, on our custom ASIC. We had over five generations of ASIC, nine generations of inverters. And now we also use what I call wide band gap devices. A lot of people use silicon carbide. We use gallium nitride. There's a reason why we chose GAN over silicon. We are big fans of wideband gap devices.

SPEAKER_01Actually, that's one of the key enabler for both the compute capability plus the availability of wideband gap devices. So what we did was we took this piece of power electronics platform that we have built, and when we started, it was solar. We used the same thing, and we said, hey, now we're going to put it inside a battery. Why? Because this was fully bidirectional, et cetera.

SPEAKER_00Well, let's just pause for a second on what you did on solar. So solar used to be, it used to be if you put a bunch of panels on your roof, they would all connect to one big inverter. And if that inverter went down or screwed up somehow, the whole installation goes down. You broke that big inverter up into these little micro inverters where you put one on each panel. So they're all kind of doing the same thing, but at a smaller scale. The benefit of that is if any one of them goes out,

SPEAKER_00It's a small degradation in the performance of the field. And you can just go replace that one without a huge repair job. So you shrink inverters down. That was your first product. That's your main product still.

SPEAKER_01Yeah, can I rephrase the shrinking part a little bit? You know, that was the conventional approach when people had tried microinverters before. They said, let's take a big box inverter and we'll shrink it down into something smaller. We just take all the components and we'll Change the values of them and make them smaller. And our approach, we realized that that would have been the wrong approach. We really re-architected it from the inside out, made it a more digital device, heavy reliance on semiconductors, heavy reliance on software.

SPEAKER_01And that's where that single stage, high frequency, predictive control system, which was very mathematical in its architecture, came about. That was one of the approaches. But the rest, everything that you said was absolutely right, actually does improve performance because now you're optimizing the output of every single solar panel. And every panel and its microinverter acts like independent energy producers. So I'm just tying a bunch of energy producers together so if I have any Impairment

SPEAKER_01on one of them, dust, debris, shade, whatever you, on one of them, it has no impact on the rest of them. The rest are operating at their max capacity. The one that's impacted is impaired, whether it could be temporary because if it's a shade that's just So you improve performance. The second one, absolutely right. I don't have a power conversion single point of failure, right? If I do have one. First, I can make this bulletproof because it's not a power problem I'm solving. I'm solving a power electronics problem using a lot of semiconductor and software.

SPEAKER_01And that can be made extremely, extremely reliable. And then also when you make it into... A microinverter that you put on the back of every single solar panel, you're converting DC to home AC wiring and right there at the panel, it becomes a very Lego block, plug and play architecture. So the simplicity was another big driver. David, it's funny, it's been such a long time since I've explained the value proposition. Of the solar environment, it's kind of funny.

SPEAKER_00I'm constantly harping, preaching on the merits of distributed architecture in a variety of systems. And we talked about it in the context of the greater bunch on this pod. You know, every chance I have to just underline that, you know, I mean, you're just describing the basic benefits of distributed architecture, the repeatability, the reliability, cheapness.

SPEAKER_01You're on the right side of technology history.

SPEAKER_00Well, yeah.

SPEAKER_01If you do distributed architecture, but they're hard to do. They really are hard to do.

SPEAKER_00So then how does that apply to solid state transformers? You're doing a similar thing. You're taking this old analog device, you're making it into power electronics, and you're taking one big thing and replacing it with a chained series of smaller modules.

SPEAKER_01Yep, precisely. For example, a five megawatt system, or a five megawatt transformer, or a five MBA transformer, and we are building it with a thousand of these five kilowatt power converters.

SPEAKER_00Right, so each power converter just takes a little bit of that power It converts it. And so working together, they convert those.

SPEAKER_01They make five megawatts, right? Precisely. And so I get all of the benefits we talked about. One of the benefits, of course, we talked about, you know, reliability. For example, a historical failure rate over the last 20 years is about 500 dppm or defective parts per million, which is 0.05% is our failure rate. So we have a very well-proven track record because of our architecture and more importantly, because of the way we build our system. So everything from, hey, we make one thing and I don't care if it's in the U.S.

SPEAKER_01at line to line, 60 hertz, 240 volts, or it's in Europe at line to neutral, 230 volts and 50 hertz. Or if it's in a battery, I just change it in software, right? So when you make one thing, you can make it at very large scale and you can really control the manufacturing process. You can automate manufacturing process because it's a piece of electronics.

SPEAKER_00And get on that cost curve, get on that sweet, sweet, sweet cost curve. Beautiful, exactly. Exactly right.

SPEAKER_01And it's cost and it's reliability. Because I just do one thing and I make it over and over and over again. Simple example is look at today's modern data center. It's not like one big monolithic computer. It's a bunch of GPUs That are tied together with software. Like, you know, in the case of the NVIDIA GPUs, there's an NVLink 72 that ties all of them together to produce a supercomputer basically, right? We take the exact same approach instead of doing it with one giant And these are power devices.

SPEAKER_01We turn the problem into power electronics. We make a thousand of them and we have it done, which we already do it at scale for our solar and So just to

SPEAKER_00help people visualize, basically, your transformer is a box of these modules. You could think of them like books on a bookshelf. And the size, you can build a transformer of any size just by sticking more of these modules in. They're like Legos. You can customize the size based on how many modules you add, basically.

SPEAKER_01You nailed it. That's exactly the approach. Just like if you think about a data center and if you have TPUs and GPUs, you can build bigger or smaller data centers. You can make modular data centers just by changing the number of GPUs that are in there. I get some benefit from one family of GPUs to other, but those are incremental. If I want to go from 100 megawatt data center to a gigawatt data center, I change the number of GPUs. If I want to go to a 1 megawatt transformer to a 5 megawatt transformer

SPEAKER_01or a 10 megawatt transformer or an MBA transformer, I just change the number of Enphase power modules that go in there or microinverters that go in there. That's exactly the answer.

SPEAKER_00Let's talk briefly about materials here, about how this affects materials and supply chain. I'm guessing copper is emerging, I think, as sort of a limiter on a lot of grid infrastructure, especially as we get these bigger and bigger loads. If you just use traditional transformers, the only way to handle bigger and bigger loads is just bigger and bigger transformers, which means more and more copper, and copper is starting to be a problem. How much...

SPEAKER_00Copper does one of these solid state transformers save relative to a similarly sized conventional transformer. Yeah.

SPEAKER_01I don't have a specific number, but I assume it's like a hundredth or a thousandth. There is no copper in it. I mean, our whole five kilowatt power module, the entire power module, all the power electronics with wideband devices, we do have a transformer, a core. The transformer and core weighs nothing, right? And, you know, grams, hundreds of grams.

SPEAKER_00Very little copper then.

SPEAKER_01Very, very little copper. Almost all of it is in the power electronics itself, which is all of the semiconductor devices. Actually, the biggest contributor to weight, I believe, is the re-encapsulated in silicon potting. So that you'd It can be outdoors. It can be rained on. We don't care. Think about our microinverters. They sit on a roof in Arizona. They sit on a roof in Alaska. Extreme temperatures, extreme weather. And so we encapsulate them in silicone potting.

SPEAKER_01They are waterproof. And so that's probably the bulk of the weight. And it's got nothing to do with the copper or iron that's in there. And so for us, Whatever it takes to make the system much more reliable, so the supply chain moves away from, it's not just the supply chain of copper and iron, it's also the manufacturing process. You go to traditional, high-volume, pictorials. Take -in -place, surface mount technology type of technologies. Very traditional PCB manufacturing technologies rather than for lack

SPEAKER_01of a better word handicraft or building these copper and iron transformers right?

SPEAKER_00What about the gallium though you know to get back to your materials question you've chosen gallium as this wide bandgap. I don't have to get into the physics necessarily, but you need gallium and that's not necessarily easy to find. And these gallium switches you're using are not necessarily easier to find is that going to be a bottleneck? Hey there everybody. Don't worry. I'm not going to tell you about a new mattress or push a credit card on you. This isn't an ad.

SPEAKER_00There are no ads on Volts. It is supported entirely by listeners like you. If you'll indulge me for a second, I'd like to ask for your support. I started Volts because we're all surrounded by depressing news about climate change and misinformation about clean energy and it's never been more important to share the stories of the real people on the ground doing the real work of transition and all the ingenuity and courage and public spirit they are bringing to it. People are hungry to hear these stories, to learn from and find inspiration in them.

SPEAKER_00I've heard from people who change majors or careers after hearing episodes of Volts. People using it in classrooms, community groups, even state legislators who have passed bills inspired by specific episodes. Sharing these stories matters. It makes a difference. If you have found value in it and want to help me continue doing it, I hope you will join the community of paid subscribers at volts .wtf. It's about the cost of a cup of coffee a month. If you don't like subscriptions, you can make a one -time contribution,

SPEAKER_00leave a review on Apple or Spotify, or just tell a friend about Volts. I am grateful for any and all support. If you're already a paid subscriber, thank you. And now back to the show. Is that going to be a bottleneck?

SPEAKER_01Yeah. So actually, on the contrary, GAN is actually commodity.

SPEAKER_00GAN is gallium nitrate. That's what you're using for your switches.

SPEAKER_01Correct. So GAN is commodity. And let me explain. And that was one of the driving factors as well for our architecture is because we wanted to run the converter at higher and higher frequencies. The higher the frequency you go, the passives, like the transformers, the chokes, et cetera, they shrink in size. When they shrink in size, you can drop the cost down.

SPEAKER_00Instead of 60 hertz, which in sort of like physics terms is incredibly slow. That's the grid speed. You've got little switches that are flipping back and forth like several hundred thousand times.

SPEAKER_01500,000 times a second.

SPEAKER_00500,000 times per second. You're creating very high frequency, which is why your transformers can be so tiny.

SPEAKER_01Yep. And then we also do some very smart things because we have our own ASIC, because we are the way we construct it. When we do the switching, we do what is called soft switching, which means that we only switch when those frequencies, when you cross the zero point. So you don't create a lot of what are called harmonics. You don't create a lot of EMI and EMC or electromagnetic interference, right? And so we have a very, unquote, from an electronic noise point of view, a very quiet system.

SPEAKER_01So GAN is really interesting.

SPEAKER_00But if harmonics come in... Can you smooth them out with your program switches?

SPEAKER_01Absolutely, we can, because we can effectively shape the size, shape the waveform because we have control over it, right? Because we can mathematically compute and say, okay, let's shape the waveform. The second thing is with GAN, it's really interesting. Unlike silicon carbide, by the way, I've said this, we were one of the first companies, I think, to ship silicon carbide-based microinverters. And our first inverter, 2008, had silicon carbide devices in it.

SPEAKER_00And that's what most of your solid state transformer competitors are using is silicon carbide switches. And you've chosen GAN instead.

SPEAKER_01We eventually moved to GAN about 10 years ago. We made a strategic decision. And the reason for that is threefold. Like I said, I want to be able to run the converter at higher and higher and higher frequency because I can drive the cost down and increase the reliability. And GAN enables us to do that. The second thing, and I'm going to get into some details here, the way GAN is built on It's GAN on top of silicon. So there is mostly silicon and a thin epitaxial layer of GAN on it.

SPEAKER_01So the manufacturing process is much, much, much simpler than silicon carbide. Silicon carbide is the second hardest material in the world And so, you know, manufacturing process is much hard. Ingots are much smaller compared to the GAN ingots, right? And so there's advantage in terms of manufacturing. And then the third thing, a little bit esoteric, is for us, we use something called this bidirectional GAN. We actually work very closely with the GAN industry to basically do this,

SPEAKER_01which is on one die, we can flow the power in both directions. So again, you drive the cost down compared to what you would do in silicon carbide, which would require So the amount of dye space that we have is much, much smaller. So GAN was a very deliberate choice. And by the way, it was a good choice for our approach, which is very high volume commodity components. Automated manufacturing, high frequency. It was a good approach for us.

SPEAKER_01I don't fault others for using a silicon carbide approach, but in some sense, architecturally drives you to do that because you're building power systems, not power electronics.

SPEAKER_00It is the case, though, that China controls almost all gallium supply. No, not for this.

SPEAKER_01We have no exposure there. In fact, when you think about manufacturing, there's something called as I'm going to digress just one moment just to answer your China question. There is something we have to understand the critical nature of the transformer is such that it is being categorized as critical infrastructure.

SPEAKER_00Yeah.

SPEAKER_01It is part of our grid. It's national interest. You want to make sure that everything is controlled, especially in this modern world where you do remote upgrades and there's software control, etc. You don't want to have what's happening in Europe with 200 Gigawatts of solar that is not necessarily in their control, right? And so we have to be very careful and mindful of the pieces of electronics that we are adding to the grid. All solar that's been installed even in the home sits on a national grid.

SPEAKER_01You know you want to be very careful about ensuring that your what is called FIOC compliant or foreign entity So for us, when we think about all the components that go into The power module or the micro inverter that we are making for solid state transformers, we have an 85% supply chain overlap between what we already do with our current solar and battery micro inverter. So we have leveraged everything that we have done there. Like I said, and built this device.

SPEAKER_01And GAN supplied the amount because the amount of GAN that we are using is so small. Like I say, it's mostly silicon and there's a GAN layer on it. We are not subject to any GAN supply chain concerns.

SPEAKER_00You're not worried about any materials bottlenecks moving forward?

SPEAKER_01Yeah, I'm not concerned about it. Not at this time. You know, things can change. We live in a very dynamic world, but I'm not concerned about it. By the way, we already have The manufacturing footprint. We have the capacity today to make 3 million of these devices per quarter. That's what we do for solar and batteries. That's the capacity we have. So 12 million devices. And so we have 50 plus gigawatts of capacity available today to make solar batteries, solid state transformers, etc.

SPEAKER_00Okay, briefly, let's talk about cybersecurity. I think a lot of people, their initial gut instinct is when you say, I want to move the whole U.S. grid over from these dumb analog devices to computers, basically, like little computers in every node of the grid, people think, well, computers can be hacked. And does this not make the whole grid... Does this not increase what they call the attack surface for cybersecurity threats

SPEAKER_00a zillion fold? How do you think about cybersecurity?

SPEAKER_01We bank online. All our banking information is available online. We transact every day. I mean, I don't remember the last time I transacted with Notes. You know, I use electronic payment schemes all the time. Do you have to pay more attention? Yes. But more importantly, is the technology available to make things more secure? Absolutely, right? So you have to think everything from hardening during the manufacturing process. When I say hardening, I'm talking about cyber hardening. Right. To in use, to managing who gets to upgrade these systems.

SPEAKER_01Are these systems, you know, you can even close format. You can say, hey, I'm going to only have a very controlled environment and how they get upgraded. I think both, of course, U.S. has done an incredible amount of work in terms of cyber, but so has Europe. Europe is also doing a lot of work in terms of all of the cyber related stuff. Absolutely a major problem to be solved. But we solve those every day. We are solving these problems, right? Like I said, we bank online, we transact everything online.

SPEAKER_01So these are all solvable problems. I'm not concerned about it.

SPEAKER_00And you don't lose any sleep thinking about... In two or three or five years, giant swarms of AI agents that have no purpose in life but to find vulnerabilities in the grid, working constantly around the clock looking for vulnerabilities to get into the grid. You don't worry about that.

SPEAKER_01No, I do. I do. I do think about it. Without, you have to, right? But that same applies to every element of our lives. Can somebody hack into my phone? Can somebody hack into my computer? Can somebody hack into my bank? But that's a race that we are in. There will be the good guys defending and the bad guys attacking. It's just the nature of the world we're living in, right? We live in an highly, highly interconnected world. I apologize for being generic about it, but that is the reality of it, right ?

SPEAKER_01We have to make sure that we harden our systems at every level, starting with, you know, we call it a birth certificate. We actually create a birth certificate for a device that is manufactured on our line so we know We know that nobody's spoofing our devices as well, right? So it starts from there, and then you look at firmware, then you look at application layer software, and then you look at, hey, where are the safety functions What are application functions?

SPEAKER_01You try to segregate those and you make sure that you are always updating and upgrading with the right safety protocols in place, right? But those mechanics exist today because a lot of systems are already doing it Yeah, yeah.

SPEAKER_00Like we said earlier, I mean, power electronics have taken over everything else.

SPEAKER_01Look, EVs and smart cars and autonomous driving and cars, and you could have an impact there. But I think it's constant race that you're in. You're going to constantly make sure that you're ahead of somebody who intends to do harm.

SPEAKER_00All right. Let's talk about the markets. I mean, transformers are everywhere, but you have this sort of chart in your white paper about the first markets, the big markets, and then the later markets. It's worth saying, interestingly, that trains, oddly, a lot of trains already have solid state transformers in them for some reason. But The next big proximate market that you're going after is data centers. So let's talk a little bit about why these are suited to data centers.

SPEAKER_00One thing, and you mentioned this earlier, is just that a data center load, because of the way AI works and AI training works, is just going to be jumping up and down constantly. It's a very dynamic load. So talk about just what Yeah. So

SPEAKER_01like in every business, you look at business opportunities and look at demand and data center was one place where very significant demand has been created. And it's because of exactly the things that you pointed out. A couple of things are happening. One is the loads becoming extremely dynamic, particularly training loads. Because of the way the transformers are computed, mathematically operated on, coefficients are generated, etc. So these loads may go from 10% to 100%, you know, five times a second, right?

SPEAKER_00Yeah.

SPEAKER_01So they're fluctuating a lot. But the second thing that's a big driver also is just the amount of power that these computes are beginning to demand. Yeah. If you look at old data centers, per rack, which is a seven-foot telecom rack, used to be 30 kilowatts. Today, they went to 150. Today, we are already at 250 kilowatts. And now we are talking about getting them up to a megawatt. Now recall the very first narrative that you had which said, hey, what do transformers do?

SPEAKER_01They boost up the voltage. So if you stay at 50 volts and it's a megawatt, you're looking at 20,000 amps. 50 volts is what traditional racks run at, 48 or 50 volts or 54. There's some nuance there. But let's assume 50, you're talking about 20,000 amps of current that you have to deliver to each of the servers in a megawatt rack. That's just not feasible. So what do people do? What's the push? The push is to go to 800 volts DC out of the gate. Eventually, the National Electrical Code limit is sitting at 1500 volts DC.

SPEAKER_01But the push is, let's go to 800 volts DC so we can drop the amount of current that we deliver to each server by almost 20X or 18X. And so we go, if you drop the amount of current, the amount of copper that you need is much, much less and the losses are much, much better.

SPEAKER_00So this is all by way of saying that data centers are shifting toward using DC inside the building, basically.

SPEAKER_01That's exactly right. There's a push to move towards 800 volts DC inside what's called the white space or the space where all the computer infrastructure lives. And where did 800 come from? That's an interesting story as well. 800 came from the Because when you do DC charging of your cars, you do them at up to 800 volts DC. So they said, hey, let's just take 800 volts DC that the car industry has solved or continues to solve Let's take that voltage and apply it to data centers as well.

SPEAKER_01So that's where the solid state transformer goes from medium voltage, which is 34,500 volts AC to 800 volts DC. That's where 800 comes from. And 800 volts DC solves that. Problem of very high current at 50 volts, which is not good. And we go to 800 volts DC and deliver 800 volts DC to the server. Now within the server, we got to do a bunch of gymnastics because the GPU still runs at one volt or less than one volt,

SPEAKER_01down. At least to the servers, let's make the delivery as efficient as possible. And that's a driver for 800 volts DC. So that's the data center problem if you may. It's solving the dynamic load problem. Making sure that that dynamic load is not reflected back to the utility. Because if you reflect that back to the utility, that would be very bad because rotating machine, whether that is within the data center or the utility, is really impacted.

SPEAKER_01So we have to make sure, and batteries play a very big role, along with SSDs, to ensure that this dynamic load that the GPUs create is not reflected out to the utilities.

SPEAKER_00Right, so you want something in between those loads and the utility that smooths it out and that presents basically a smooth, steady demand to the utility, to the bulk grid.

SPEAKER_01To the bulk grid and solve this load problem, which is racks going up to a megawatt and it's just not practical to service them with 50 volts DC.

SPEAKER_00And this is something we should say that is very much current and underway. Like 800 volt DC is not yet the standard. I don't think it's fair to say this is something that people are shifting to at the moment. And this is why you think it's a big opportunity for SSTs.

SPEAKER_01Absolutely right. And I think we have said 2027, you should expect pilots at 800 volts DC and then deployments in 2028. I mean, it could be maybe end of 27 where you start seeing those first signs of deployment. And then 2028, you should start seeing a ramp up. And I expect that Any company or companies that deliver viable SSDs will see quick adoption because it makes sense. It makes sense because you're dramatically simplifying the powertrain from the way it is today.

SPEAKER_00What are you saving? What equipment are you substituting for? Like, what is this going to do tangibly in data centers? What are you getting rid of if you shift to an SSD?

SPEAKER_01One of the use cases is you do eliminate what's called the double conversion UPS. So there are two conversions that take place. So there's this traditional transformer, then you have a power control system or a PCS, and then you have a UPS, and then you have another PCS, and then you go create 415 volts or 480 volts AC, and then from there you transform yet again to 54 volts DC, and then you transform yet again at the server. How about I simplify that train and go from medium voltage,

SPEAKER_0134,500 volts to 800 volts. Which is what you get from the grid. Which is what I get from the grid in one shot. Boom. Straight into the server. And then, of course, server does the rest of the conversion. I mean, there are estimates, right? These are estimates. And again, depends on configuration. But estimates are you could save as much as, you know, four and a half to five percent inefficiencies.

SPEAKER_00To me, this is obvious to everyone, but we say it anyway. Every time you convert, you lose it a tiny bit. Like all those conversions, you're losing tiny increments. So the fewer conversions, the better, basically.

SPEAKER_01Absolutely right. If I can make something four to five percent more efficient, that's one. The second one is I can also reduce the cost because I have one piece of equipment versus multiple pieces of equipment. Right. So I can see some significant improvement in cost. And by the way, I mean, without getting into the details here, Enphase specifically because of our approach, because we do the single stage power conversion, we have a very, very fast response time. We can actually have additional savings because of the battery that you use. You can rely on the big battery energy storage system,

SPEAKER_01the two-hour or four-hour best that's sitting farther away in a yard. Again, those are really details. But we can save a lot more money than going the traditional route or even what I speculate will be the traditional SST route. So we have some additional benefits. I don't want to go there. So there are CAPEX savings, efficiency savings, and along comes reliability savings as well.

SPEAKER_00Well, I'll go there very briefly, but the idea I think is like instead of having a battery next to each server rack doing this kind of smoothing and converting everything. BBU, yep. Yeah, you just have one big battery outside and the SST is doing all the smoothing work for you, feeding it into, so you don't need those individual batteries by every rack. This is the idea.

SPEAKER_01That is the general idea, but you put that big battery at the SSD, or do you rely on a bigger battery that's sitting maybe a quarter mile away in a gigawatt data center, which is a two-hour or a four-hour BESS? So a gigawatt data center may have four gigawatt hours of batteries, which is, what is it? It's going to be about 30 plus acres. So it's sitting a quarter mile away. I interconnect on medium voltage.

SPEAKER_01I interconnect those batteries on medium voltage using an SSD And then I do the power conversion. And can I absorb those load fluctuations at 10%, 100 % five times a second? Do I have to absorb it locally at the SSD or can I absorbe it? Absorb means by definition batteries. Right. Or can I observe it in the yard quarter mile away?

SPEAKER_00Remember, quarter mile way in a BESS. Right. And then theoretically you're separating Building big battery facilities, which you can just build batteries and use all the efficiencies of that, and then building the data center separately without all the batteries in it. You separate those two things. You can make each of them more efficient.

SPEAKER_01And you increase the amount of compute that you can add in a white space.

SPEAKER_00That's the big driver. Because you're literally saving space.

SPEAKER_01You're saving 150% of the space, because today 50%, there's this notion of a side rack, which contains the battery backup unit, the power supply unit, the power distribution unit, and et cetera. So if you can simplify that entire powertrain, and if Enphase can show that, hey, you don't even need that local battery anymore, Hey, that could be a huge advantage to the entire system.

SPEAKER_00Yeah, yeah. Lots more compute in the same building.

SPEAKER_01Yeah. So the question comes, if I save 5% in efficiency, do I take that 5% efficiency to saving electrons, saving energy? I think that's a very good reason to do if you are power constrained, which in a lot of cases we are. Right. But in the other case, it means I can add 5% more GPUs.

SPEAKER_00Right.

SPEAKER_01I can add more GPUs, which means I can generate more revenue. I can be more efficient. My amount of tokens per watt improves.

SPEAKER_00So hyperscalers need this and have a lot of money. So they're the first big market that SSTs are going after approximately. This is all semi-speculative. We're talking about pilots of this next year, maybe. And then, you know, the industry shifting to SSTs, 28, 29, 30, something like that. But that's the big market with a lot of money that you're going after first. Correct.

SPEAKER_01Yes, I'm far more bullish as an engineer. I think about it on a first principles basis. I go, why wouldn't you put something that's more reliable, more efficient, and lower cost? And so if you believe in the AI, in the AI transformation, which I'm a believer in, I think you should expect this to happen sooner than later.

SPEAKER_00Yes, but it's always the engineering mindset running up against the institutional conservatism of AI. People with lots of money who have been doing things a certain way for a long time. It always goes more slowly than one might like. But one way or the other, these are about to move into data centers in a big way.

SPEAKER_01100%.

SPEAKER_00Let's talk then about... So that's kind of the first big chunk you're after. You say the later adopter, the next big market after that is going to be solar and batteries. So talk about why...

SPEAKER_01So the battery problem we're going to solve in parallel with the data center problem, because like I mentioned, you're going to put an SST in front of the battery, in front of the BESS, because you're not going to transmit DC out of the battery over a quarter mile distance. It's too low of all. You want to bump that up to medium voltage, which you can either do it using a power control system plus a conventional transformer, or you could just put an SSD there and I can do it.

SPEAKER_00Right. Power control system plus transformer replaced by a single device that does both.

SPEAKER_01Precisely. So we'll solve the data center and the best problem almost simultaneously because they go hand in hand. It's part of the Enphase vision. Enphase vision is always that you never make individual widgets. They're all part of a system and they all have to cooperate and operate like a system. So that's our view. But then the next big opportunity, I mean, if you look at just the utility scale PV market itself for 2027, It's 30 to 40 gigawatts, right?

SPEAKER_01It's a massive opportunity that you want to play in if possible.

SPEAKER_00To say nothing of the global. Oh, global is even bigger. Growth, which is even crazier in a lot of places. So why do these work well with utility-scale solar?

SPEAKER_01One of the biggest things that you can do, you know, today if you look at conventional PCS systems, at least this is the Enphase perspective, the conventional PCS systems with a utility transformer. Again, you're simplifying sort of two components. You're going to a single component.

SPEAKER_00So instead of one thing converting from AC to DC or vice versa, and one thing adjusting voltage, you're converting and adjusting voltage in one machine.

SPEAKER_01In one machine.

SPEAKER_00Just to repeat that one more time.

SPEAKER_01Exactly. And then when you have a system like ours, you know, remember, as I mentioned, in a 5MVA SSD, we have a thousand of these. We actually undersubscribe our inverters by about 6%. So what that means is I have 60 additional inverters. They still run, all thousand of them run, but there are like approximately 60 additional inverters that are just sitting there. They're all underutilized by about 6% in power. So I can dramatically increase the reliability.

SPEAKER_01Not of the copper and iron transformer, but that pair of copper and iron transformer plus the PCS. Because of the approach that we are taking, we can dramatically improve the reliability of the PV system. So, you know, typically they tend to be five-year warranty. Can we think about potentially offering 20-year warranty? You know, it becomes feasible. You know, obviously our focus today is on data centers and BSS, but that's definitely possible that we can

SPEAKER_00So you think you can take an existing utility scale solar field, replace the converters and transformers on site with SSTs, and that would increase the reliability of the existing field?

SPEAKER_01Absolutely. Our approach, that's exactly how in a retrofit scenario, that's what would be the selling point saying, hey, we can really do something. And I forgot to mention one really interesting thing. Remember the thousand devices that I talked about? Each one of them weighs about eight pounds or so. And it's about two feet long, an inch and a half tall. Because they are racked in a backplane, so think about it like servers are, they plug into a backplane, we are building a robot, a cobot.

SPEAKER_01Because there's medium voltage there, you know, instead of sending a human being there, you know, send a simple robot that opens their door and slides one out if it's failed and slides another one back in.

SPEAKER_00Right, it's just like unplugging one of these things and plugging a new one in, basically. It's as simple as that, replacing one of these modules, and you built a robot that can do that.

SPEAKER_01Yeah, we are working, building it. We have not built it yet. But that is something, because it's so light, it's feasible for us to do that. If this thing weighed hundreds of pounds, if our power modules were really big and weighed hundreds of pounds, that would be a difficult proposition. So we can hot swap. You don't have to take the whole system down. And you can do it with a robot. So all of the regulatory requirements around trained personnel and all of that gets much, much simpler because you're doing it with a machine,

SPEAKER_01not with a human being.

SPEAKER_00And just, I don't know if we said this, but it's just worth saying that solar fields create, generate, In DC or they generate AC and you have to convert it to?

SPEAKER_01The other way around. They convert. The panels are all connected in series. They create DC. And then the power control system takes that DC, converts it into low voltage AC. And then the big medium voltage transformer takes that low voltage AC and boosts it up into grid interconnection at 34,500 volts.

SPEAKER_00And SST will basically do all that in one. In one shot. One step, one machine. One machine, yeah. You're going to increase reliability and reduce CAPEX, I guess, is the vision for solar in the future.

SPEAKER_01Yeah, so the CAPEX part, I think there's so much value. I would rather than pin down a specific thing. I mean, there's so much value creation, whether that is through CAPEX, OPEX, RHEL, all of those contribute. I mean, it's all about total cost of ownership. So I want to be clear that you think about

SPEAKER_00Yeah, yeah. Well, maybe this is a good time to talk about this because maybe I shouldn't have skipped past this in the first place. But everybody, of course, when I toss this out online, everybody wants to know about cost. One of these solid-state transformers, just on a pure CapEx comparison, compared to a traditional transformer, is much more expensive. It's like five to ten times more expensive than a conventional transformer. The idea here is... The system that you are enabling with solid state transformers is going

SPEAKER_00to be cheaper than the system that involves dumb transformers, basically. If I can shorthand the whole thing, because you're going to save on some capex because you have one machine instead of two. You're going to save on operating costs because you have higher efficiencies, et cetera. That's the theory of the case here. Is that right?

SPEAKER_01Yeah, and I wouldn't quite characterize it as 5 to 10x, but it will be more expensive to begin with. But because it's semiconductor and software,

SPEAKER_00we can continue.

SPEAKER_01We are on a cost curve. Remember, we are just starting these conventional transforms in Iran for 140 years. Then you solve the supply chain problem. You solve the reliability problem. You solve the O&M problem. There are so many problems that we can solve with this device. Like every new technology, you got to start somewhere, you got to prove yourself, and then you build from there. And that's all feasible with this because it's been done before, right? We have done power electronics.

SPEAKER_00It's like many clean energy technologies. They're going after data centers because hyperscalers have the money to fund these early technologies, basically. Early deployment. And then you drive the cost down. You move into solar. Right. And then you drive the cost down further, theoretically. And then you get into my favorite piece of all this, also the most speculative part of all this, but I think the really interesting future vision here, which is get cheap enough,

SPEAKER_00start working well enough. Then you go after the Transformers at the neighborhood level. There are 60 million Transformers. These gray transformer boxes that people see around their neighborhoods on top of poles, all of those are transformers. So all of those are pieces of iron with two copper wires wrapped around them. Many of them, I think I read somewhere, something like half of them are basically at the end of their rated life cycle.

SPEAKER_00So... This is of great interest to me. What could you do with a distribution grid where every one of those transformers was smart, was a solid state transformer that has this software control? What could that enable?

SPEAKER_01And that is exactly, I don't think it's a nice to have.

SPEAKER_00I think it's a necessity to Because of this bidirectional distributed energy evolution we're going under.

SPEAKER_01Absolutely right. Because of this transformation that we are going through where the homes are becoming the units of intelligent. I have my solar, I have my batteries, I have my smart EV chargers, I have my smart robot running around, I have a lot. I have power needs in my house, and my house is becoming absolutely intelligent in how it produces energy, how it stores energy, how it consumes energy, and how it networks my energy to the rest

SPEAKER_01So that whole transformation has to happen and it will happen because that's what power electronics does. And so a core element of that transformation is this neighborhood transformer, that gray box that either sits on the ground or sits on a pole that needs to evolve. And so absolutely, I think that's going to happen. The most important thing that needs to happen is From our point of view, before we can go attack that problem is we need to prove reliability

SPEAKER_01because those transformers are extremely reliable. Cost is not something you really worry about because we know we are on a cost asymptote that we can compress cost with software and semiconductors far better than you can compress cost with copper and iron.

SPEAKER_00I'll just put it to you straight. Do you think there is a future where manufacturing of these modules is scaled up sufficiently? You've ridden the cost curve down far enough that you can get on something like cost parity with a straightforward analog transformer? Is that the goal or just to get closer?

SPEAKER_01No, it's the goal and I think it's achievable. I don't know in how many years, you know, it could be three years, it could be five years. I'm not talking about 50 years, right? You're talking about a cost curve that is not in the very distant future. It's Not the next two years, right? We are still scaling, but this is a question of scale, right? You get to scale, you get to fully automated manufacturing, you get to a very efficient supply chain, all of which is feasible. We have done this with solar.

SPEAKER_01You can really do this for traditional transformers as well. Now comes the institutional part.

SPEAKER_00Yeah, I was going to say, the technology piece, I believe, persuading utilities to change something fundamental that they do is, to me, a much more intractable problem.

SPEAKER_01Actually, David, you'll be surprised. I think we are having a lot more discussions with utilities about solid-state transformers. They see this technology coming. They see the value of it. Now, that doesn't mean that adoption happens overnight, but they do see the value And so they are curious about it and they want to learn about it. We are talking to them, we are having some good conversations with them, so I think the adoption could be faster than one thinks.

SPEAKER_00Interesting. Is any utility out there using solid -state transformers on pole tops yet? Or are solid -stage transformers not really ready yet for that? Like, is anybody piloting it or trying it at all?

SPEAKER_01As far as I know, I could be wrong. At least in the US, I don't believe so. There could be some pilots, there could be some lab systems that are running, but I don't know. But no reason, at least the folks that we are speaking with, they are looking at it very seriously. But I don't know what the timeline for adoption will be, but they're definitely looking at CFD.

SPEAKER_00But is it fair to say if we want the kind of grid that we talk about all the time on Volts, which is a grid that looks a lot more like the internet, where there's a lot more action at the distribution at the local level, where all these local devices are being... Networked together, balanced off one another, where power is being shared from household to household without ever going up into the bulk grid. All of this sort of local ground up grid architecture that we talk about here

SPEAKER_00on Volts all the time. You can't get there without something like this, I think. Without smart transformers in the middle of it all. Is that fair to say, do you think?

SPEAKER_01It's absolutely fair to say today we are making small steps towards it with things like VPP, flexible interconnection, etc. So we are doing that today, right? Flexing the home, flexing businesses. This is part of that first thesis I was mentioning today. We need to make the grid incredibly intelligent, which means all elements of the grid, all components of the grid need to have built-in intelligence that can not just monitor, but monitor and control the That's how we make

SPEAKER_01the grid modern and more efficient, more reliable, drive the costs down, etc. But bear in mind that when we talk about SSCs today and you talk about PV, you talk about front of the meter BESS, you talk about data centers, you talk about fast DC charging, they are already connecting to the grid.

SPEAKER_00Yeah.

SPEAKER_01Right? On the grid side, we are interconnecting 34.5 kV or 13.8 kV. Sorry, they will be connecting... They are, in some sense, an extension of the grid. It's just past the meter. But in the case of front of the meter, they are part of the grid, right? So you are interconnecting an SSD into the grid. So they need to understand how an SSD behaves. And that's the beauty of it. That's the first step to acceptance by the utilities. They go, oh, okay, I see you have an SSD. You have a 50 megawatt PV array and you're interconnecting that 50 megawatt PV array

SPEAKER_01with an SSD, not with a PCS and a traditional transformer. Now I understand what the behavior of that SSD.

SPEAKER_00So grid operators will see these things operating immediately. In PV fields, in data centers. They will be connecting them to their grids, and this will give them a close look at how they operate and some confidence to eventually... Spread them into the neighborhood level. It's just worth emphasizing that that market, 60 million of these things dwarfs the data center market and the PV market. Like that's the big prize basically is like infusing intelligence all throughout

SPEAKER_00the distribution grid and not just at these select nodes.

SPEAKER_01Simply put US grid is 500 gigawatts.

SPEAKER_00That's a lot of transforming going on.

SPEAKER_01That's a lot of transformations that need to happen. Now, some of it happens at the transmission line. Some of that happens at the distribution line. But it's a 500 gigawatt grid. First, we've got to grow that. 500 ain't going to cut it.

SPEAKER_00Yeah, we want to 2x or 3x that if we're going to electrify everything.

SPEAKER_01Precisely. We've got to 2x or 3x that. And we got to do it intelligently. We got to do it smartly. We got to do it fast. We got to do it reliably. And we got to do it cost effectively.

SPEAKER_00Let me throw a couple of common objections at you, just sort of speed around here for you to respond to. The first is cost. I think we sort of addressed that. Like, currently, these are more on a pure CapEx basis. But A, they're coming down. They're going to come down the cost curve. And B, they're sort of... Replacing multiple other kinds of equipment and c they're enabling operational savings. So you think on like a total cost of ownership basis, they're already competitive and they're going to get more competitive.

SPEAKER_00That's the cost question. On efficiency, a good old fashioned iron transformer Is about 99% efficient. It's extremely efficient. I think like solid state transformers are in the sort of 96, 97, 98 range.

SPEAKER_01No, we are targeting 98 and a half.

SPEAKER_0098 and a half. You're targeting that or you've reached that?

SPEAKER_01Oh, no, we'll reach that. We'll reach that. That's the target and that's where we'll reach.

SPEAKER_00And so that's not a limiter at all. No, it's not at all.

SPEAKER_01Efficiency is not the limiter.

SPEAKER_00Okay. And then the big ding I see is lifespan. A piece of iron with two copper wires wrapped around it is quite durable and will last for 50 plus years with very little maintenance. Your solid state transformer currently has a 10 year maintenance. So I guess that is substantially less of a lifespan. And when I think about when you start replacing pole top boxes in neighborhoods,

SPEAKER_00utilities having to come and replace those every 10 years, that's a substantial increase in operational costs. How do you think about the durability question?

SPEAKER_01Yeah, you have to work on it. So first thing, warranty is a business construct. Design life is going to be much, much longer than 10 years, right? So look, today our solar microinverters, which sit on a roof in Arizona and sit on a roof in Alaska, are warranted for 25 years, right? So, you know, electronics can be made very, very, very reliable. They follow a different reliability curve, right, in terms of useful life and wear out, etc.

SPEAKER_01But we can solve those problems. And the problem is worth solving, is my point, right, because of the intelligence and because of all the other benefits that I get with it. Is it going to be 40-year warranty from day one? No, it shouldn't be. It won't be. But is that something that we can work over time? Absolutely. You bet. Nobody thought that we could offer a 25-year warranty on a piece of polytronics on a hot, hot roof in Arizona.

SPEAKER_00So you think like a 25-year warranty on a solid-state transformer is not out of the question in a few years, in whatever?

SPEAKER_01Absolutely. It's not out of the question.

SPEAKER_00And what about eventually getting to 50 to matching traditional transformers? Is that even something that's on the horizon or do you think there's some limiters?

SPEAKER_01You know, with current technology, a 50 is a bit of a stretch. I haven't even thought about it because of where wear out begins. You have to drive the MTBF way up. Let's get to 25 first.

SPEAKER_00Okay. What about heat? Electronics do not like heat. Summers are getting hotter. It's hot inside data centers. The massive variety of operating contexts in which transformers show up is really kind of mind-boggling. How do you think about heat and thermal management?

SPEAKER_01Yeah. It's a straight up design function. I can design something so if it's 98.5% efficient, I'm losing a percent and a half in heat. So I can do the math on how much that is on a per inverter basis. And then it's a Simply a question of picking the right components, making sure that you have sufficient design margin, and making sure that you can dissipate that heat and not allow any one single component to be a point of failure, right? That's what we do.

SPEAKER_01That's what Enphase does is design equipment that sits in very harsh environments, like on a roof, for example, very high temperature environments with minimum failures. And so it's a design parameter.

SPEAKER_00And all that engineering transfers pretty straightforwardly from your solar inverters to your SSTs. Like it's the same type.

SPEAKER_01Yeah. Funny enough, I joke about this. In some sense, the SST thermal problem, it's in a more benign environment than being on a roof.

SPEAKER_00Yeah. Roofs. There are a lot of different kinds of roofs, a lot of different kinds of weather.

SPEAKER_01A lot of different kinds of roof. And you really don't have a lot of control in how they get installed. Because our installers install them, we train them, but we are all humans and we don't have a huge amount of controls. But what you do have is you have telemetry built into all of these devices. So we have a deep sense of, hey, how is this system performing under these grid conditions? Grid is very harsh, by the way. Grid is extremely harsh.

SPEAKER_01So how is our system performing under these grid conditions? How is the system performing under these load conditions? How is the system performing under these weather conditions? So we have deep sense about that.

SPEAKER_00And theoretically, you can get information about degradation before you get total failure, right? If you have these telemetric.

SPEAKER_01Absolutely. So, you know, they are all running diagnostics on themselves. And we are all networked. So we have whatever, 90 million that we have shipped. We have networked these devices. We are in 5.2, 5.3 million homes worldwide. You can imagine how many grids that is. Right? How many different types of grids those are. And so we get data from all of them. In real time, we know exactly what happens, how are these behaving, and so the intelligence is there in these devices that says, one, hey,

SPEAKER_01I see an abnormal situation because of the control system that I was talking about, our own ASIC. They will go, oh, I don't understand this situation. It's out of my safe operating area. I'm just going to shut down for a little bit because to protect myself. We do that as a normal course of operation. But if there's a degradation as well, we are reporting up saying, hey, my performance is degrading and it could check on me or it's now getting to the point where it's more intelligent.

SPEAKER_01It says, hey, this is what's wrong with me and I'm having a headache or whatever. Send me an aspirin.

SPEAKER_00One other safety question. In an analog grid, when a tree branch or something falls or a cable or something causes a short, An iron transformer will push this huge surge of current, which is the signal to all the fuses and breakers to shut off. And then sort of you cut the damaged, you cut off the propagation of that fault. Electronics... Can't do that because the switches would destroy themselves if they tried to do that.

SPEAKER_00How do you address that specific problem? How do you address faults or tree branches or squirrels or things that go wrong in the grid? How would those be absorbed and communicated so that you could cordon off the problem?

SPEAKER_01It's interesting that it's posited as a problem. Actually, I see it as an advantage, right? I'm not dumping... You know, hundreds of thousands of amps into a fault, right? Like what a conventional transformer would do. I'm intrinsically current limited. Now, the intelligence there needs to say, hey, I recognize that as a fault or I recognize that as a normal load fluctuation, right? And that simply has to do with the DIDT or rate of change of current. So I have a lot of intelligence built into my system to recognize what's a fault.

SPEAKER_01And if I recognize what's a fault, finding a way to trip a breaker, for example. So there's a lot of work that's going on. And for example, you may have heard of solid state breakers. That's something that's coming and people are working on those and we can trip those.

SPEAKER_00Yes. I had a guy, I wrote an article about this. In Vox years ago. I felt like over five years ago, a guy who was making circuit breakers, solid state, basically the same thing you're doing with transformers he's doing with circuit breakERS. And I always thought that was so brilliant, such a brilliant idea because that's a little piece of intelligence Between every single grid and every single device. And I always wondered, like, what happened to that? Are those things catching on? I always wondered what happened to that guy. No, no, that's happening.

SPEAKER_01That's happening for sure. Yeah, you know, look at it. Do you want to deal with a 100,000 amp problem? Or do you want to deal with a, hey, I need to recognize what's a fault and deal with a few thousand amp problem, right? But I need to recognize the rate of change occurring. And I have all the intelligence there. I know what's a fault, right? Right.

SPEAKER_00So this will be much better at isolating faults, basically.

SPEAKER_01Without a doubt. Without a doubt, because I can be smart enough not to take the entire system down. I can isolate faults much more efficiently, much quickly. As long as I have that intelligence, I can trip a fast tripping breaker, for example, right? Those are all doable. This is a good engineering problem and it's a good place to be, not a bad place to be. I do hear this as being posited as a problem and I don't see it as one.

SPEAKER_00Well, I guess people get used to a certain way of responding to things and inertia is a real thing. Okay, I've kept you for too long. Just as a final, let's look forward a little bit. I think it's pretty clear to me that power electronics are going to eventually take over the grid like they've taken over everything else with all the benefits we've been talking about for this whole episode. But How is it going to happen like on a one, two, three year basis? Are there any sort of like policies that you would support?

SPEAKER_00We have this transformer shortage right now. And so all these like places are ramping up their manufacturing of traditional transformers. And I sort of feel like we're at the spot where We need a bunch of new transformers. A bunch of these pole top transformers are wearing out. We're kind of at a spot where like we really need to get these SSTs going and out as quickly as possible before we just get sort of a surge of the traditional ones installed. I guess I'm just wondering how it all plays out.

SPEAKER_00Do you have policies or policy recommendations? What would you like to see happen in the next two to three years outside of your own company, just in general?

SPEAKER_01In general, yeah. I think policies absolutely will play a role. Things like UL standards, they need to catch up because this is a whole new venue of dealing with power electronics on the main power grid. So there's a lot of work going on in the UL standards-making bodies, the National Electrical Code. So it starts there, working with first responders and firefighters saying, hey, here's a new piece of equipment that will argue that it's going to modernize the grid while making it more safe, right?

SPEAKER_00Safer for the technicians that are out there repairing it, you mean?

SPEAKER_01Safer for the technicians that are repairing it, safer for the first responders if there's a tree that falls across and how you deal with falls, etc., right? So I think this is all has to be viewed from the lens of this is the... gateway to a modern grid, which we need to get to urgently given. On the policy side as well, right? We have to have lawmakers, you know, recognizing that this such a technology exists.

SPEAKER_01So it's a lot of education to the lawmakers that says, here's a brand new technology and it's going to be, again, the gateway to the transformation of the grid, gateway to the modernization of the grid. But along with it comes things like, hey, we need to make sure that there is cyber related guardrails around it and intelligence built. And so I think you recognize what the future is and you go knock out those barriers because those barriers are worth knocking out because you have to.

SPEAKER_01You don't have a choice but to get to a more modern grid.

SPEAKER_00And I would say just to anticipate what I think is probably on some listeners' minds, this would absolutely be necessary for quote unquote winning the AI race if that's your concern. But it will also be necessary just if the grid moves more towards inverter-based resources like wind and solar, which is happening, also going to be necessary if the Transportation is electrifying. Heat and cooling is electrifying. Industry is electrifying.

SPEAKER_00All of these changes point toward a smarter, more software controlled grid. It's not just an AI thing. It's not just for data centers.

SPEAKER_01100% correct. It's just the data center is maybe a point of entry.

SPEAKER_00A leading indicator.

SPEAKER_01Yes, a leading indicator, but Again, like I said, we don't have a choice but to modernize and make our grid far, far more intelligent. But more importantly, do it rapidly because we can't wait for another 50 years for that to happen. This needs to happen in the next five to 10 years. And that's just going to be transformative for all our lives and our children's lives.

SPEAKER_00All right. Well, we'll leave it there. This has been predictably fascinating, Ragu. Thank you for staying with me for longer than I asked, you know, I could talk about this for hours, but thank you for coming on and walking us through it.

SPEAKER_01Awesome, David. Thank you. I actually had so much fun. You just have a way of asking the right questions and directing the narrative. It's amazing. So much fun.

SPEAKER_00Well, thank you. Thank you. All right.

SPEAKER_01We'll talk soon.

SPEAKER_00Thanks, everybody. You've been listening to Volts, founded and hosted by me, David Roberts, produced by Nate Peavy, and supported entirely through the generosity of listeners like you. If you value conversations like this, please consider joining our community of paid subscribers at volts.wtf. See you next time. [music]

Open the transcript file

Hosts and Guests

Nobody is credited on this episode yet.

Credit the people on this episode

Be the first to rate this episode

More episodes

All episodes
  1. Can a developer turn data centers’ reputation around?

    Nov 20, 20261 hr 6 minAudio

    This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit www.volts.wtf/subscribe When people push for better data centers, they picture hyperscalers - Amazon,...

    Credit the people on this episode

  2. “Repowering” worn out solar fields could create gigawatts of new grid capacity, quickly

    Nov 18, 20261 hr 18 minAudio

    This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit www.volts.wtf/subscribe America’s first big wave of solar power installations, built between 15 and...

    Credit the people on this episode

  3. The federal permitting bill has been updated. What changed?

    Nov 11, 20261 hr 59 minAudio

    This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit www.volts.wtf/subscribe The Senate’s bipartisan permitting bill got a manager’s amendment last week -...

    Credit the people on this episode

  4. So, how about those midterm elections?

    Nov 9, 20261 hr 26 minAudio

    This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit www.volts.wtf/subscribe Last week’s election was a blue wave all the way down the ballot: Democrats...

    Credit the people on this episode

  5. Best of October 2026

    Nov 6, 202614 minAudio

    This is a free preview of a paid episode. To hear more, visit www.volts.wtf Volts published eight conversations in October, which is a lot for anyone to listen to. We’ve rounded up the highlights into less than an hour....

    Credit the people on this episode