Keith and Jason screw up everything this week, from a freak shop injury that derails Keith's next big build to a costly drilling mistake on a door Jason spent days making. Keith breaks down what the finished coffee bar cabinets actually cost and compare it to Jason's surprisingly pricey shop bathroom door. We also discuss cabinet lighting, how to structure multi-part YouTube builds, and YouTube's new way of counting views. Oh, and Jason's shop addition is hermetically sealed like an iron lung. Be sure to check out Bits & Bits at www.bitsbits.com and use coupon code MORSELS15 to save 15% on your order of router and/or CNC bits. Be sure to hit up Katz-Moses Tools at www.KMTools.com - cool tools at a fair price. If it's on their website, it's in Jonathan's apron. www.kmtools.com **And check out the new Katz Moses toolless adjustable countersink, new miter bar, and new sharpening jig and sliding stop block. Oh, and don't forget about his new aluminum channel French Cleat system with some bad azz 3D printed accessories that lock in place!! And be sure to check out WTB Woodworking in person at 390 Pike Road, Unit 2, Huntingdon Valley, PA for lumber, slabs, woodworking tools and MORE!! HUGE Shaper Tools sale going on now through 10/31/26 with up to $890 off of select packages. Come one, come all to the 2nd Annual Maker Meetup on Saturday October 24th from 9a-3pm. Tons of vendors, demos, free food and discounts! WTB is also running their latest giveaway which is a cordless Kreg tools package valued at over $1200. Go to wtbwoodworking.com/giveaway for details and to register to win. You can also shop online for all your favorite woodworking tools and products and earn yourself some Burkell bucks for every dollar you spend at wtbwoodworking.com If you'd like to support us on Patreon and have access to our irreverent aftershow, you can sign up here: https://www.patreon.com/shopsoundspodcast You can find us on Instagram, Youtube, Facebook and TikTok (maybe): Bourbon Moth Woodworking and Keith Johnson Woodworking and Kodamari Design
Audio and video play straight from the show's own hosting. PodSubs stores and serves no media.
Transcript
From the show. Tap a time to play from there.
Speaker 1You're listening to the Shop Sounds Podcast, a woodworking podcast about nothing. All right, folks, let's start the insanity. Despite the fact that I think there should be some sort of historical record of toilet paper through the ages, Jason is unbelievable at spelling people's last names. And Mary isn't here because someone vomited on her vest.
Speaker 2And yet.
Speaker 1Bits and Bits continue to sponsor a show about nothing. And while we're doing nothing, Bits and Bits is doing something. They're in the factory cooking up the highest quality router and CNC bits. Hold on. I lost a window. I like that for an ad read. The highest quality router in CNC bits right here in the good old US of A, where there are no guarantees in life, but
Speaker 1there is karma, Kramer. There is also Astra HP coating, which makes bits harder, slicker, and longer lasting than a kick to the head by crazy Joe Davola. And not only does Bits and Bits make their own bits, but they also toss Whitesides bits in that same Astra HP coding and give them an upgrade as well. And hey, you need some customer support. You need help choosing a bit or wondering why your radar detector isn't detecting radar. Well, you need to detect that contact us button on bitsbits.com
Speaker 1and chat with a human. Get some help. And while you're on that bitsbit.com website, you should really use the coupon code morsels15 to save 15% on your order of bits. Because every time you use that coupon code, my morsels get one step closer to ordering seltzer. You're not getting salsa.
Speaker 2Seltzer. Would you like some salsa?
Speaker 1That's a tall order.
Speaker 2We are also sponsored by the good folks over at KN Tools. If you haven't already, go over to kmtools.com and check it out. If you're looking for anything woodworking related, there's a good chance that you're going to find it over at KM Tools. They've got all sorts of goodies over there, including drill bits, chisels, aprons, jigs, finishes, sandpaper, you name it, they've got it. And... They also help support the Katz Moses Woodworkers with Disability Fund. And if
Speaker 2you haven't heard, they're holding quite the event this, not this coming week. Well, it'll be this coming weekend when you hear this ad read. Down at the Buffalo Trace Distillery to raise money for the Katz Moses Woodworkers with Disability Fund. It's called Grain to Grain. A lot of you folks that are patrons are going to be down there. And we're very excited. I'm going down there. Keith, he knows about it. Um, so anyways, you should check it out. There's going to be a lot of, uh, updates and stories about it on the old Instagram, but head over
Speaker 2to KM tools.com. Check it out. Get yourself some, you know, bourbon blades, some no deflection, stop blocks. The tool is countersink bit just to name a few, check it out and sign up for their newsletter while you're over there to be up to date on all the different sales they have going on throughout the year.
Speaker 1Hmm. Well, now it's WTB woodworking time. First off, let's tell you about Bill's new Blockbuster Blue Tool giveaway. I was about to say Blue Chew giveaway.
Speaker 2Not Blue Chew.
Speaker 1Which will load up your shop with over $ 1, 200 in Kreg cordless tools. It includes the new loose tenon joiner thing. Does that thing even have a name? I don't know.
Speaker 2Yeah.
Speaker 1Oh. We don't know what it is, but there's going to be some drills in this giveaway, a wet dry vac, and some batteries and chargers. And the winner will be chosen live at the second year anniversary extravaganza on October 24th. So it's only a few weeks.
Speaker 2Has it been two years already?
Speaker 1Can you believe that? That's an animal. It feels like it just happened. I know. It feels like the first one was just last year.
Speaker 2Oh, wait. It was.
Speaker 1Now, to sign up and get registration details, go to wtbwoodworking.com slash giveaway. Now, let's get our loose tenons fully seated in this anniversary celebration. Make our meetup mortis. Because, as I said, it's coming to you live October 24th from 9 a.m. to 3 p.m. Location, WTB Woodworking HQ. You should have had the... address memorized by now, but it's 390 Pike Road, Hunting, Dong Valley, Pennsylvania. Now, what can
Speaker 1you expect? Free food, refreshments, giveaways, peasant games like Cornholio and Steal the Old Man's Bundle. And there's also going to be a ton of brand demos all day long by Shaper, Microjig, Festool, Target Coatings, Craig, Ann Lamello, and more. and tons of other just brand reps on sites hiding under tents from companies like Titebond, Mafal, Rikon, Jet, Tennyroo, Dutton Tools, Powermatic, and more. Bill will also be hopping in the saddle and commandeering demos of his new turbo
Speaker 1sawmill and Norwood bandsaw for slicing up lumber and slabs. And my sources tell me there will also be some kind of a raffle that you could win a $ 500 gift certificate to spend at WTB Woodworking while you're there. And all the proceeds from this raffle get taken from Bill's inventory, but then go directly to the Katz Moses Woodworkers with Disabilities Fund. Jason had just mentioned. All of this is happening. from 9 a.m to 3 p.m wtb
Speaker 1woodworking hq 390 pike road in huntingdon valley pa october 24th come on everybody i don't care i mean if you are within driving distance which means six to eight hours you gotta hop.
Speaker 2In the car 14 hours yeah.
Speaker 1Even that somewhere i mean if you can get there in a day you really should come check it out have fun i'll be there Pete will be there. I'm sure Eric and Mary will be there. Joe, our good friend Joe from Delaware Valley Woodshop. He's right around the corner. So there'll be a ton of people there. A ton of fun.
Speaker 2I know about it.
Speaker 1Yeah. Well, maybe we'll have you on the... Bill always has your YouTube videos playing on the screen in the shop.
Speaker 2Oh, perfect.
Speaker 1It's like you're there.
Speaker 2Oh, wonderful. Yeah, yeah.
Speaker 1Maybe we'll get a big cardboard cutout of you. Or like a wax museum of you.
Speaker 2Oh, it'd be funny to do a wax museum, but it's really me covered in wax and I stay still the whole entire time. And then the last five minutes I jump out.
Speaker 1Surprise! Can you imagine how hot that would be in there just being encased in wax? No airflow, nothing.
Speaker 2We've also got some new patrons. We got Robert. Will you be my Valentine? Ballantine. We got Bill straight out of Compton. We got Edzel.
Speaker 1Heath.
Speaker 2He knows his way around a ledger.
Speaker 1So, yeah.
Speaker 2A big welcome to those three new patrons. If you're not a patron and you want to sign up, it's simple. You just go over to patreon.com slash shopsoundspodcast, just sign up, and then you'll have access to our after show, which basically is like a whole other podcast right after this one where we get crazy. You can also ask questions over on Patreon. We'll answer them on the after show podcast portion. You get access to the live stream. I mean, the the perks are just endless. So you want to
Speaker 2go sign up, help support the podcast, patreon.com slash shop sounds podcast. And, and the music and the stream. Oh, and then, uh, we got a bunch of returning top tier patrons. We'll shout them out towards the end of the podcast.
Speaker 1I always forget that part of the podcast broadcast. Well, no, Mary, no, Mary, uh, I'm not sure what she had prior engagement. You know, we had to move things around, too, because you're leaving town. And I, you know, early this week, I'm busy and things. So, hey, when you're trying to juggle three people's lives into one common time, it doesn't always work.
Speaker 2So that's what happens.
Speaker 1We'll be fine. This is like old school. Just you and me. Just the two of us. Post-Nicholas.
Speaker 2What's new? Man, my chair is extra squeaky today. Got to put some oil on this thing.
Speaker 1I don't know. Should we get right into what we screwed up? Because for me, that's kind of the top.
Speaker 2I feel like the last few weeks, that's been the whole podcast. It's just things we screwed up. We've had lots of good material, and I got a couple of them for this here portion. But I want to hear what you screwed up because... Sorry, I had to hit the theme music.
Speaker 1That's fine. Oh, s * * *.
Speaker 2I got sent a picture that was a little worrying.
Speaker 1Gotta screw up.
Speaker 2The theme music.
Speaker 1Yeah, so Saturday, last Saturday, a week previous from today, Uh, I was in the shop, I was at the bench and I dropped something. So I turned around and now I admit, like I have arms like an orangutan. They're like too long for my body. Like this huge wingspan. And sometimes like a woman who underestimates her fetal girth, like I just forget where my arms are flailing around. Fetal girth. So as I was standing back up, I
Speaker 1was turning at the same time and my arm just came flying around and hit the corner of my workbench. right on my pinky knuckle. And yeah, I mean, I definitely saw stars when it happened, but I was like, ah, that wasn't too bad. And then it started to really throb and swell up. So I put some ice on and I'm holding it up, just to kind of keep the blood flowing down. And it just starts getting more and more swollen and turning purple. And my pinky, which
Speaker 1on a regular basis, anyway, my pinky normally kind of just grows out towards my other three fingers or away from my other three fingers. It's just the way my bone structure is or whatever. Like you can see it just, it sits there and it just goes away. Yeah. So it was kept moving further and further and further away because of the swelling. It was like a kickstand. So I'm like, I don't think this is, I mean, I would think I, cause I could still bend it and I could move it. It's like, there's no way this
Speaker 1is broken. Like it would hurt a lot more. But then the next day, the swelling had got even worse and I couldn't even, the pinky was so far away from the rest of my fingers. It was like almost a right angle. So I was like, I probably should go to urgent care and get an x-ray just in case. So get an x-ray. And the girl's like, yeah, it's broken.
Speaker 2So wait a second. You're telling me that all of this Was you just standing in your shop, flailing your arms and you hit your pinky?
Speaker 1Well, I bent over to pick something up. And when I came back up, I like went like this, like waving my hand to come like twirling back around. And it just caught the corner of like coming up under the corner.
Speaker 2Such a freak way to break your, have you ever broken a bone before?
Speaker 1Never. I'm, I'm damaged goods now. I honestly, I'm not sure how I'm going to be able to go on. Oh, Yeah, that was one of my kind of, you know, things I could always brag about. I've never broken a bone before.
Speaker 2Dude, I've never broken a bone that I know of. To be fair, I've probably broken some fingers. But unlike you, I never go, like, get them checked out. I just, like, tape them to the other ones and come what may. But I do have a few misshapen ones now. But I've never confirmed a broken bone.
Speaker 1I see. I got the x-ray and the late, the girl's like, yeah, it's broken. But you know, she's just an urgent care. She's not an orthopedist. So I make an appointment with the orthopedist. And now there was three days in between the x-ray and when I was able to get into an orthopedist. And in that time, like the finger was throbbing, but it, it wasn't bothering me that much, except obviously when you go to grip something, you have no grip strength. But when you have a finger that is just sticking out from your others all
Speaker 1the time, That is what catches on everything. And as soon as it like bends outward, that's where the pain comes.
Speaker 2Yeah.
Speaker 1So I'm like, I really need to just like tape these together. But I couldn't because they were so swollen. I couldn't even tape them together without it really hurting. Oh, that would have been a good idea. So the orthopedist confirmed. So it was, you know, this whole thing. It wasn't a clean break. It was really just like a fracture downward. down where the, right in the knuckle where the knuckle meets the hand. So it wasn't even up towards the middle knuckle, like the base.
Speaker 2Sounds like your thumb, which is basically like the general of the fingers wasn't keeping the pinky in line.
Speaker 1Oh, that's right. It was not. I couldn't make my Turkey thing to draw with a pen, make my Turkey shape. So, you know, this whole, whatever it was, this placement of their proximal phalange, you know, all the doctors speak. He's like, listen, Ultimately, there's nothing we can do. We're going to tape these two fingers together so you don't catch it on anything and then come back in three to four weeks. But in the meantime, just do some exercises where it's, I mean, I can bend, I can bend it all the way
Speaker 1down like that.
Speaker 2Yeah.
Speaker 1But.
Speaker 2See, that's why I have probably broken fingers, but I've never done anything about it. Same with toes. I've probably broken a couple of toes, dropping stuff on them. But I've always heard that like you go to the doctor and that's what they tell you. Like, yeah, well. tape it. We can't do anything about it. So with that knowledge, why would I go to the doctor?
Speaker 1Yeah. But I wanted that knowledge. Like I wanted to just know, and like the best way to treat it. And so, I mean, he gave me one cool tip to put a little gauze in between the two fingers. So the knuckles don't rub and get wrong. Um, and make sure my silk.
Speaker 2Tape, like you could do like ultra runners do and lube up in between your fingers with Vaseline with nipple, nipple lube. Yeah. No, they like coat their feet with Vaseline so they don't get blisters when they're running.
Speaker 1Yeah, but you must be sloshing around in there, like slipping.
Speaker 2That's what I always thought. Do their shoes fly off in a fit of glee when they fall?
Speaker 1Bloop. A fit of glee?
Speaker 2It's an old, what was the stand-up comedian? Dane Cook. Remember that guy?
Speaker 1Oh, I do. Yeah.
Speaker 2He used to do this stand-up thing where he was talking about how, like, how come whenever somebody gets hit by a car, their shoes fly off? He's like, what happens? They fly off in a fit of glee, like... Unless you're wearing, like, flip-flops.
Speaker 1Whose shoes come untied?
Speaker 2Whenever you come to an accident, there's always just shoes laying on the ground.
Speaker 1You were shoeless.
Speaker 2So is that all you screwed up? Just your pinky?
Speaker 1Well, now the biggest problem is because... the next project was this nine and a half foot walnut media console, which I picked up the lumber for already. But now I can't, these boards are 10 feet long by like 14 inches wide. Like I can't grip a board and like move it like that. I mean, I have grip strength, but not enough to be moving giant things like that. So now I need to come up with a quick air quotes, Keith air quotes, quick project, small project.
Speaker 2Yeah. Yeah.
Speaker 1I know. So I think what I'm going to do is when Mary and Pete and I took that bent lamination class last summer in Texas, I have the bending form from that because I did a prototype. So it just needs one more layer to make so I can make the thing thicker. And I can buy veneers, bendable veneers, so I don't have to resaw and run through the jump sander. So I have the bending form, I have the veneers, and I should be able to turn that
Speaker 1into a relatively quick for me project without, you know, having to lift anything heavy. So, yeah, I, there were other screw ups in this coffee bar cabinet project, but nothing were, nothing that was too severe to really stick in my memory. If I think of something by the time you're through your list.
Speaker 2I got a couple. The first one, I don't know if I can call it a screw up as much as a very near miss.
Speaker 1Okay.
Speaker 2So the first one is, I sent you a picture, but don't look at that yet.
Speaker 1Oh, okay.
Speaker 2Because I'm on my near miss first. So I was building this door this week for the bathroom in the wood shop because I needed a quick project to get done just in a week before I leave for Buffalo Trace. And I didn't want to just build a door. I wanted it to be kind of cool. So I wanted to do like an arched top with glass in it, privacy glass because it's a bathroom. So I built a door. I had to do it because it's like floating panels on the bottom, glass on the top. I didn't want
Speaker 2to do the glass like a floating panel and lock it in there because if the glass ever broke or something, you want to be able to access it. So I wanted to do floating panel on the bottom, mortise and tenon for my rails and stiles. And then on the top, Do like a rabbit, set the glass in, and then make some wood sashing trim to hold the glass in there. So I had to do like stop dados on the bottom. It was a pain in the butt. Got the whole bottom done. Got the top glued up. Cut out my arch. And next I had to cut the rabbit. But with
Speaker 2the thickness of my panel, I wanted the glass to set at the same distance back from the frame of the door as my panels on the bottom.
Speaker 1Okay.
Speaker 2And the door is an inch and three eighths thick, which meant I had to do like a seven eighths deep rabbit on the back of this to get the glass set in the door far enough. And I had already ordered the glass to the right width and I didn't want to have to try and cut it skinnier. So I needed to do a three quarter inch wide rabbit, seven eighths of an inch deep. That's a beefy rabbit.
Speaker 1Yeah, it's a monster.
Speaker 2So in my mind, I'm like, well, instead of doing this in one pass, I do have a three quarter inch rabbiting bit, a giant one. But I was like, that's going to tear this thing out if I just go full blast right off the bat. So I started off with a quarter inch rabbiting bit, went around the whole thing. And then I just kept increasing the depth until I got to my seven eighths. And then I switched to a half inch rabbiting bit, put it in the router, started to make my pass. And I'm like,
Speaker 2that looks a little wider than an extra quarter of an inch. Well, it's because I was now referencing off of my cut rabbit Instead of the door. So I really cut three quarters of an inch in, which was fine. Like I said, that's what you needed, right? It was a near miss because that was my final depth. But then I realized like, I'm just going to have to go to this big bit because I have to reference off the door. So I just full sent it and
Speaker 2it worked out because I'd already taken off that quarter of an inch, you know, broke the edge.
Speaker 1Yeah. Right.
Speaker 2Gaped without any tear up. So that was the first near miss. Then I'm building this whole door. It actually worked out really good. I was a little worried about the sashing pieces because they had to be curved to match the arch, but I ended up just using the door as my template and doing bending form. I just, yeah, just my bending form. And I just did like two strips glued together, like a small little glue lamb. And then I glued another strip to create like a overhanging lip on the upper part. That worked out great. Got that all done. Honestly, the sashing took me just as
Speaker 2long to glue lamb and get them all cut with mitered corners and fit in there nice and tight as it did to build the rest of the door. I mean, it took a while. So at this point, I'd been working on this door for about three days. I mortised out for all my hinges. That was fine. Now it was time to put the doorknob in the door. Now I have a jig. I've done doorknobs before. And the jig is idiot proof.
Speaker 1Okay.
Speaker 2You clamp it on the front. It's already set the correct distance for a standard doorknob. So you clamp it on the side of the door, wherever you want your doorknob to be. There's a hole on the top that you use a hole saw to drill your hole partway through. And then when your bit sticks out the bottom, you reverse around and then go through the other side. So you get a nice clean cut on both sides. Then there's a hole in the front for your little catch mechanism to go like on the side of the door. So I put the jig on there. I double checked all my measurements. I held up the doorknob and the catch,
Speaker 2made sure that like, yes, everything is going to line up perfect right there. I measured again because I just spent three days building this door. I have to drill a hole all the way through it. Now, big hole. Don't want to screw this up. So after checking, double checking, rechecking, I'm just about ready to drill this hole. And I look at the jig and I'm like, it just doesn't look quite square. So I go grab a square. I
Speaker 2pull the jig off. I put it back on. Double checking that it's square. It's square now. And I start to drill my hole. Now, one of the design flaws with this jig is that on the underside, to keep it from slipping and sliding around, there are four rubber feet. that stick out farther than like the flat surface of the jig. So when I loosen the jig to pull
Speaker 2it off, to put my square on there, I loosened it just enough for it to slide off, but it was still tight enough that when I slid it back on the last time, it stopped against those rubber feet, not against like the reference surface of the jig. So it was sticking off the door a half inch. from where it actually needed to be, but it was square. So then I started drilling my hole with this big
Speaker 2old two inch hole saw. And I get about halfway through the door, not far enough that the bit sticks out the other side of the door, but about like halfway through the door with the hole saw part. And I'm looking at this and I'm like, this doesn't seem right. So I stopped drilling and I realized my jig's not on there all the way. And I just fucking drilled a two inch hole with the hole saw this nice eighth inch perfect circle in the wrong spot on my door that I've been working on for three fricking days.
Speaker 2So the picture I sent you is the hole, the mistake.
Speaker 1I mean, it looks almost centered.
Speaker 2Was it supposed to be centered on the style? Looks like it's like a quarter inch off. It's got to be farther in. Because the catch is like a set size. You got to hit the center of that so that the pin and the doorknob goes through it. If you're off.
Speaker 1Was that the inside of the door or the outside?
Speaker 2The show side. Yeah. The money side.
Speaker 1The money side.
Speaker 2So, I mean, at this point. I literally can't do anything. I can't replace that whole style. It's all glued in with all my mortise and tenons. I already spent the time rabbiting out. My sashing fits there. I mean, like, I'm stuck with it.
Speaker 1You get a bigger knob with a bigger scutch and plate covers it all.
Speaker 2So, here, I'll send you another picture. Went over to the Shaper Origin. I made a plug. Eighth inch wide. Perfect half circle. I spent like 20 minutes trying to find the right wood. Yeah.
Speaker 1Oh, the right grain. Yeah. To match as close.
Speaker 2As I could. And then here, here's a picture after it's sanded. It's not perfect, but all things considered, it's pretty damn good.
Speaker 1I mean, I probably would have done the same thing.
Speaker 2Literally. I tried to think of anything else I could do. The only other thing I could think is like get a, piece of brass because it's a brass doorknob that's like bigger than the doorknob stick it behind it as like an accent but dude I didn't have time for that.
Speaker 1Yeah or you just use a again this is I wouldn't do it probably but yeah you take like walnut and make a plug that's bigger so now it's a comp but again yeah.
Speaker 2Yeah but I didn't want that I mean it wasn't yeah it's not gonna look good yeah right one more picture here the Nice thing is that with the style of doorknob and the positioning of the door, when it's shut right against the frame, it hides it pretty good. Cause it's like in the shadow of the doorknob here.
Speaker 2I just sent you. Yeah. Right. You're right.
Speaker 1It is like the knob. It's almost lines up perfectly with.
Speaker 2Your, Yeah. So, I mean, like it's one of those things that if I don't point it out to anybody, they're probably never going to notice. I was just so pissed, man.
Speaker 1Oh yeah. Would have sent me flying too. I would have broke my other pinky on that one.
Speaker 2Other than that door turned out great. Got it hung. It's beautiful.
Speaker 1Is that reeded glass? It was right.
Speaker 2Yeah. It's kind of like this, like corduroy, like ribbed glass.
Speaker 1Yeah.
Speaker 2Um, It's not as private as I was hoping it would be.
Speaker 1You should have got the privacy glass like I have on my office door here.
Speaker 2But to be honest, it's like we just go pee in that bathroom. It's only me and Craig in the shop. Who really cares? We've been using it for months now without a door even on there.
Speaker 1But the glass is up here at shoulder level. So if you're in there on the throne.
Speaker 2Unless someone's standing there. If you're back far enough, like you're sitting on the toilet, it's actually pretty private. When you're standing right up against the glass, you can obviously see through it. Yeah. That was a doozy. The good news is I had to use my new Festool 1400 router a lot this week, and I always got the wrench in the right spot on the collet.
Speaker 1Lesson learned.
Speaker 2There is that.
Speaker 1Actually, I did have a few other screw ups and you talking about how you had to wrap it up for the glass reminded me of it. So on this coffee bar cabinet, the upper and lower, the face frame is all white Oak and it, the corners miter around to the frame and panel on the end panel. Like you've done this before on your vanities and things. So I was going to do the same thing, glue up the frame, cut a rabbit in the back and drop
Speaker 1in the panel. But I got a little ahead of myself. I'm like, I really want to glue these miters up, the miter wraps up, so those are done, rather than glue up the frame. Yeah, so I couldn't do the wrap. Right, because the base plate just hits the inside of the miter. I was like, okay, hey, no big deal. All my pieces are, the other pieces are still separate, so I'll just do it at the table saw and cut a rabbet. Unfortunately, I didn't want to do a stopped rabbet. friggin groove
Speaker 1or rabbit on the table saw with a dado stack and especially on a wrapped miter because the thing stands like this tall and like it gets a little tippy um so i'm like i'll just and i thought it was a good lesson to people like you don't have to do it with a router you can do it this way just tear all the way through and then just put patches in on the end on the styles the rails go all the way through anyway but the styles and then just glue in a couple patches because you're not you're not going to see it and it's
Speaker 1really just meat for the pocket screws to grab Yeah.
Speaker 2There's also another way that you can do a rabbit in tight spaces like that.
Speaker 1Hmm.
Speaker 2I've found, and it's a little unconventional. I don't know how you're going to feel about it. Domino joiner.
Speaker 1What you plunge and just drag.
Speaker 2You plunge and drag, or you just plunge and move and plunge and move and plunge and move.
Speaker 1Oh, my gosh. Yeah.
Speaker 2You can actually drag it. It works pretty good. But it's nice because you can get into way tighter spaces with the domino joiner. You can set the depth exactly where you want it. Right. And then you just do a little bit of cleanup with the chisel, and you're good to go. Huh. Not that I've ever had to do that before in this exact circumstance, but it can be done.
Speaker 1Hey, when sometimes you got to think a little unconventionally. So then what happened was the panels were, I had made my own veneer and contact cemented them onto the half inch MDF panels or whatever. So the rabbit was only like, I want to say three eighths of an inch all the way around. So then when you drop
Speaker 1in that panel, like how did you secure your panels into that rabbit when you, you know, when you do your vanities and stuff?
Speaker 2Um, I put some glue in there and I think I just kind of angle a few 23 gauge nails from the back just to hold it in until the glue dries. And then honestly, you don't even need very much glue. Cause if it's flat, um, Like flush with your frame once you mount your frame to the side of your cabinet box. It can't go anywhere. It's locked in there. It's like a floating panel at that point. Right.
Speaker 1So the reason I didn't want to glue it was because I wanted to pre-finish those panels with Rubio before I installed them in case there was any wood movement. And it's just easier doing those panels on the flat.
Speaker 2Now that I say it, I don't think I put any glue in there either. Because I did the same thing. I pre-finish them. I think I just pop a few 23 gauge nails in there just to keep it held. So it's not falling out. And then when I attach it to the cabinet box, it's locked in there. Right.
Speaker 1So what I did was number one, I made the panel width a little bit smaller because I had like an eighth inch thick veneer on there. And again, you're not going to get that much wood movement, but I just wanted to leave a little bit of gap just in case. So now my original thought was, hey, I will recess some figure eight fasteners all the way around and just secure this thing in there so it can't move and it's just easy. But then I'm like, man, that's a lot of frigging drilling out with a Forstner
Speaker 1bit on the actual frame itself and the panel. I'll just screw it in from the back. So I pre-drilled all these holes. Now, granted, there's only a quarter inch, maybe a little more of meat. on the frame for you to screw through the panel into that frame. So not a lot of me, but again, you don't need a ton of holding power anyway, but just something, like you said, just hold it in place. And because I had made the panel a little bit smaller than I wanted when I first drilled my, when I went to
Speaker 1drive my first screw in, it like hit the edge of the outside of the rabbit and like, but here's the thing. There's like a bunch of wormholes everywhere. So it actually looks like just a wormhole, but then I had to, uh, redrill everything. And I mean, it worked out fine, but it was, it was a little dicey. I would be more nervous about screwing up the angle on a 23 gauge pin nailer and sending one of those through the front. Yeah.
Speaker 2But I don't use them long enough. Even if I went straight, like I use tiny ones when I do it, like three quarter inch or like half inch, even like, Literally, the only reason I'm putting them in there is so that panel doesn't fall out while I'm moving the thing around.
Speaker 1Yeah.
Speaker 2You don't need it held in there very good because once you sandwich it on the side of your cabinet, it's locked in there. Yeah.
Speaker 1It's true. It's true. What else did I.
Speaker 2I'll tell you what I was nervous about, though, is that sashing on the door to hold the glass in. I was trying to think like, okay, I made all this sashing trim and it honestly probably didn't need anything to hold the trim in there because I had such a good friction fit with the three pieces that it was just like wedged in there. But I was like, I don't know if the wood shrinks at all, piece going to fall out or something. So I was trying to think, do I recess some like brass screws through the side of it? But then I didn't like the
Speaker 2idea of like visible screws around in there. So I just used a few 23-gauge pin nails on the inside to hold it in place. Because, I mean, I can pop those off if I ever need to get access to it. But doing those into the side of the door, knowing that I'm like a quarter of an inch away from the edge of that glass was a little nerve-wracking. Because sometimes you hit a hard spot, those nails just like horse you around.
Speaker 1That's exactly how I installed the... whatever you want to call it, doorstop in my glass door. And I put a rubber pad down so that the nail gun was sitting on that. And still, I was only using three quarter inch pins, but I'm like, if this goes, like you just said, it goes one way or the other, any which way, it shatters this $ 100 piece of tempered glass or my finger. Fortunately, it all worked out. So the other thing I screwed up is as I'm drilling the shelf pin holes, I'm like, on camera, I'm waxing
Speaker 1poetic about I don't run my holes all the way up from top to bottom because it just looks hacky. There's no need. Once you put the shelves in, 95% of the time they never move because you just have them centered. And if you want to move one up or down a little, you only need one shelf pinhole above and below. That's it. So I spaced them perfectly to take into account the one inch hardwood edging on the shelf So that when you put the shelves in, they were all equidistant. If you put them in the
Speaker 1middle hole. So then that was like, I don't know how long ago that was. They did that. And then finally yesterday or the day before I get the glass came, I got that installed. I got all the door. I got the door hung. I closed the door and I'm like, boy, the space between the top shelf and the bottom shelf is much bigger than the space between the top shelf and the door rail. I spaced it from the cabinet opening, not how it looks when the door is closed and
Speaker 1the rails. So the question is, I don't think there's a right or wrong way. But if you did it the other way so they look equidistant when the door is closed, then the bottom shelf space is way bigger and the top is way bigger than the middle. It's going to be mud and stuff.
Speaker 2I think there is definitely a right way. I think it's to space it evenly when the door's closed. Son of a bitch. Because the doors are closed 98% of the life of the piece. I mean. Yeah.
Speaker 1Well, it's too late now. Okay. I'll tell you that. Because I did screw up. I think we talked about this in the last play. I did screw up those shelf pinholes. And I ended up, we talked about, you know, flipping around, you know, getting kind of fancy with the shelf pins themselves. Well, I ended up, unplugging them and re-drilling and they were still a little off. So the shelf pins I have, have this little plastic sleeve that go over them so that when you put the shelf on it, just like a little bit of a cush. So what I did was I took one of those sleeves,
Speaker 1cut it in half and then glued a half of it on top of one of the other ones to give it a little boost up.
Speaker 2Oh yeah.
Speaker 1So now, yeah, I mean, just gave it a little flat.
Speaker 2You could also do, I thought about this after our conversation last time is like when you make your own zero clearance insert for like a table saw, do you put those little adjuster feet on the bottom?
Speaker 1Yes.
Speaker 2Allen key things. Yes. You could totally put those on the bottom of your shelf.
Speaker 1Oh, wow. Yeah.
Speaker 2Right. And then just micro adjust them with the Allen key where you need it to. I mean, it would work.
Speaker 1Oh, so speaking of the shelf, here's the other thing I screwed up. because I needed to screw from the inside of that upper cabinet, which is all riffs on white Oak veneer plywood, I needed to screw at least in one spot through to catch one of the styles on that whole panel. Cause otherwise like I didn't want it. I didn't know if it was really flush up against my box. I couldn't tell. So I'm like, I just need to get one screw in there and I'll do it where the shelf is. So when the shelf's in,
Speaker 1it's hidden behind the side of the shelf. Well, I put it if I was going to be... putting the shelf in the top shelf pinhole not the middle hole which i know so now i get this silver screw head which again nobody like wants this stuff on the shelf you're Okay, you know what? Let's just keep rolling. I did screw something else up. I'm not used to building these cabinets with just glue and screws and pocket screws. The base cabinet was easy because all the pocket screws
Speaker 1are hidden inside the carcass and at the top on the stretchers. All that stuff gets hidden. But on the upper cabinet, you can't have exposed pocket screws inside. So I have these... add-on clamps that Bessie makes that you tighten on to a regular F style clamp, and then you can screw. So it goes this way. It almost, it looks like a, it's basically the thread of a screw, but so you clamp on a clamp and then you can screw. It's like, it makes a three-way clamp.
Speaker 2All right.
Speaker 1So I have those. And then I also have, they're called style, right? Clamps by fast cap. So there are these giant F style clamps, but they got two five millimeter pins and that stick in your shelf pinholes, and then you can tighten your face ring. So I get all these frigging clamps up, right? Get, I get, I'm using quick and thick, which sets up pretty damn quick.
Speaker 2So I get, and thick.
Speaker 1Box all coded. And now I got to like put eight different clamps on this thing. Now I had scribed the left side and like everything was set to fit. Well, when I was tightening things down, like, because it was such a mad dash before the glue was set, like it didn't, wasn't perfect. So my scribe against the refrigerator pan, I mean, dude, we're talking like a 30 second gap and it's black, the panel. So you can't see anything,
Speaker 1but I was like, dang, that's really annoying. Like I, this is where like the lamello or dominoes just comes in. So clutch because you don't have to worry about that. Like you, you, cut the slots ahead of time and then just snap it on. But yeah, so it was a little lesson in humility using only glue and screws for this entire thing. So hopefully it's a little more relatable to people, but in the end, dude, all right, I have here in my formerly nicotine stained fingers, a kid,
Speaker 1the total for this project.
Speaker 2Okay. Let's hear it.
Speaker 1Now you got to remember this includes the electrician costs because I wasn't I couldn't run my own GFC outlet from existing and run 24 volt and new switches and all this stuff. The countertop, the, the, uh, granite countertop piece, which turned out really nice. And it was actually a lot less than I thought it was going to be.
Speaker 2How big is that? 18 by 20.
Speaker 1I mean, it's 24 by 24 basically.
Speaker 2Okay. Yeah. Yeah.
Speaker 1It was actually a hundred dollars plus less than they said it was going to be. Um, so you get the tempered glass, all the white Oak, the Riffson white Oak plywood, uh, The drawer slides, the hinges, everything. $ 1, 994. Oh, and the drawer boxes, which I paid.
Speaker 2For that little cabinet unit.
Speaker 1For the upper and lower. Yeah. So, but I can tell you this. My buddy is a cabinet maker and is also a cabinet dealer. We priced this thing out like months ago because originally I was like, hey, dude, well, like how much is it if I just buy this? And it was almost $ 2, 500.
Speaker 2Yeah.
Speaker 1To buy this type of thing, which wasn't as costly as mine.
Speaker 2You look at that little bank of cabinets, you're like, all right, $ 2, 000. That seems crazy. But I mean, for a whole new kitchen, you're talking like 40 grand, 50 grand. Yeah. At least.
Speaker 1Well, and think about where you could save money. All right. You could build your own drawers like a savage. You could not use white oak. You could use red oak. That sheet of Riffson white oak plywood was $ 160. So you could get cheaper plywood. You could use side mount slides, which are cheaper than under mounts. You could just use eighth inch regular glass rather than three sixteenths tempered glass. So there's ways to save even more money and probably get it down to $ 1, 000. But the granite was $ 200
Speaker 1right there. And if you do your own electrical work, that'll save you $ 600 or $ 500. But I wasn't about to do that.
Speaker 2Well, maybe this will make you feel a little better. Let's go through the price on this bathroom door that I made for my wood shop.
Speaker 1Okay.
Speaker 2Okay. We got the Rifts on White Oak. I ordered 66 board feet of Rifts on White Oak, which seems like a lot for a door. It's 10 eight foot long pieces ranging anywhere.
Speaker 1But it's a quarter, right?
Speaker 2It's six quarters. Oh. Which it took a chance with six quarter, but an interior door is only an inch and three eighths. So I still had a little wiggle room.
Speaker 1Okay.
Speaker 2I got 10 eight foot boards in that 66 board feet, ranging anywhere from four and a half inches to six inches wide. I only had two boards left over. So I used eight boards total for this one door. So for the lumber alone, It was around $ 1, 000. Oh, wait, how many board feet? 66 board feet.
Speaker 1All right. I mean, I bought 25 board feet for this and it was Riffson. It was 240 bucks. So that sounds about right then. 25 for 10 bucks.
Speaker 2Now, I did make a little mistake when I was purchasing the wood because in my mind, I was like, all right, I need six quarter for this. And I ordered enough six quarter basically to have plenty to cover the entire opening. I wasn't thinking in my head like, oh yeah, well, I only need six quarter for the frame, not for the panels. Plus half the door is going to be glass. But I ended up, I just re-sawed the six quarter and it worked fine for the panels. So that was like a thousand dollars for wood. Okay. Then I used unlacquered brass hinges, doorknob, restroom pins. Plaque
Speaker 2and locking mechanism.
Speaker 1Does it say his, him, her, he, they, she? And family bathroom as well?
Speaker 2It says restroom.
Speaker 1Oh, okay.
Speaker 2For the doorknob alone, because it's like a nice, unlike a brass doorknob, it's like $ 350. Yeah. For the doorknob. All right.
Speaker 1It's worth $ 1350.
Speaker 2Add probably another $ 200 for the hinges, the lock, and the bathroom plaque. So we're at what?
Speaker 1$ 1350. $ 1550.
Speaker 2$ 1550 right now. Now the glass. Then the glass was like $ 250. Now I could have saved a little money on the glass. I ordered three pieces just in case I broke one because it was cut to the right height and the right width, but I had to custom cut the curve on it. Oh, you did.
Speaker 1All right.
Speaker 2And, you know, anything can happen when you're custom cutting glass. So I wanted an extra piece just in case, which I didn't end up using. Both of them cut just fine. Cutting glass really isn't as hard as people think it is. So that was, yeah, $ 250. So we're at what? $ 1, 700? $ 1, 800.
Speaker 1$ 1, 800?
Speaker 2Not including, you know, finish. Probably another $ 50 in finish.
Speaker 1Sure. Yeah, so my one bathroom door....
Speaker 2Was about the same price as your bank of kitchen cabinets with granite countertop.
Speaker 1Wow.
Speaker 2Wow.
Speaker 1Yeah. See, again, that's where the hardware comes in, right? You get $ 300 or whatever.
Speaker 2Now, could you have done it cheaper? Absolutely. You could have built the same door out of poplar and plywood, painted it, picked up some hinges and a doorknob at Home Depot for next to nothing. And you probably could have spent a few hundred bucks building the same door.
Speaker 1But it wouldn't. Go with anything in that new shop, of course.
Speaker 2Yeah. I mean, when it comes to a wood shop, the number one rule is everything's got to be aesthetically pleasing and match. I mean, that's the golden rule. Everyone knows about a wood shop.
Speaker 1Got to have a bathroom in there, too.
Speaker 2If you're not using unlacquered brass hardware, are you even building a wood shop? I mean, that's the real question.
Speaker 1Oh, man.
Speaker 2I will say... A lot of fine chisel work goes into door making and hanging.
Speaker 1Yeah.
Speaker 2Because, I mean, you've got to mortise out so many things. And you can do most of the work with the router, but you've got to clean everything up with the chisel. True. What were you going to say?
Speaker 1Do you use the shaper edge mortising jig or whatever for your door hinges?
Speaker 2Do you have that there? I do. It's in a box. I've never opened it up. I mean, I've made something very similar to that in the past to do like pocket door hardware, like the latch system, because the hardware you typically like for pocket doors, it's got this like button you push where a handle pops out and then it's got a lock on it. And you have to do like a stair stepped mortise for everything to fit in there. And it's kind of a pain. So I've used it in the past for that. For this, I just did old school. I just put my hinges on there.
Speaker 2I scored the edges with a razor blade. I did most of it with a router. and then I just cleaned up with the chisel. I mean, honestly, by the time I got the shaper set up and did some test files and did all that, I would have been done with the hinges already.
Speaker 1Yeah, yeah, it's true. So.
Speaker 2And you can't put the shaper on the door jam itself. I mean, I had a mortise out on the jam for all the hinges. So I had to do that by hand anyways, but got it done. Got it hung. Works great.
Speaker 1Yeah. It looks cool. It looks cool. I'm yeah. Lindsay was happy with this. This was the one thing she asked for at the end of the Island. So at the end of the bank of cabinet. So, and the toe kick drawer is works, works well. Again, the problem with that toe kick drawer is, is toe kicks are a certain depth for a certain reason. Because when you walk up to the counter.
Speaker 2I was going to say, do you accidentally open it all the time?
Speaker 1I have already. I mean, it's not in use yet. I literally just finished it. I just put the silicone around the countertop today. But I have already nicked it with my foot and kind of pushed it open.
Speaker 2So.
Speaker 1But whatever. The. Otherwise, those LEDs that I use, they're five millimeter cob. And I was able to do one run all the way down the inside of the cabinet and like turn it and then go underneath the cabinet and then back up the inside. You know, they twist easily. So I only had to use one run and that silicone snap in LED worked awesome. The channel, the diffuser rather.
Speaker 2You know what I saw on Instagram? I forget. I feel bad on Instagram. what account posted it. It was somebody I don't follow, but it was like a cabinet shop. Maybe you saw this video, but they were building custom cabinets, I think in a kitchen or a closet, something for a client. They wanted the shelves to be adjustable, but they wanted under shelf LEDs. So they had it set up where the pins were the contact point with like a strip of brass down the side of the cabinet, which I thought was kind of cool.
Speaker 1Let me tell you something. All right. Okay.
Speaker 2That's my hateful love.
Speaker 1Those are, get the sensor ready. Those are so fucking expensive. It's insane.
Speaker 2Okay, but they're cool.
Speaker 1Kind of. Like I would so much, I'm not denying they're cool. When I first saw them, I'm like, hey, that's a cool idea. And then I saw the price tag. I'm like, these are not cool. Like I would so much rather just, this is the first time I've run LEDs up the sides of a cabinet like that. Like, you know, they're in the front third. And I like that look. Or what I would do is have your face frame overlap your box and then use that right angle channel on the inside to shoot the light inwards.
Speaker 1The idea of having adjustable shelves with the lighting... Again, if money's not an object, God bless.
Speaker 2Cool. But.
Speaker 1you got to have a big budget for that stuff. And like all the wiring and transformers and different things.
Speaker 2I'm just saying it was a cool thing.
Speaker 1It is, but I just want to give you a shot of reality that it is super expensive. You know, maybe not for a million of your means, but I, sometimes I just go off, man. I can't, I can't help myself.
Speaker 2For the audience. Cause everyone's curious. Like when you say ridiculously expensive, what are we talking?
Speaker 1I think for one shelf, like a three foot piece, uh, And that doesn't include the contacts and the driver and just the LED and like a three foot piece was like $ 90. Yeah. And you're talking how many shelves and then plus all the other stuff that goes along with it.
Speaker 2Super quick.
Speaker 1I'd be happy to verify that. But yeah, they had, I'd seen it before and then they had it at IWF. And I think I saw that exact same post that you saw the other day. hear what these things are called like that thing they're called lumix or low.
Speaker 2Um well you see i want to incorporate some leds into my shop upper cabinets and i want to do the under shelf leds because i just like the way it kind of projects back into the box but i'm with you that i think adjustable shelves are kind of stupid because you never adjust them So I'm going to go the cheaper route and use the same ones I did for the Seahawks lockers, which do have a wire. You got to thread through the thing, but they're way cheaper, super easy to install. And you're not going to move
Speaker 2the shelf around. Right.
Speaker 1Sorry, I was just trying to find. Yeah, they're called Hafele Lux 5, L-O-O-X, under cabinet. I'm sure, I mean, no, wait, that's not it. Adjustable light bar.
Speaker 2Well, and then if you use those, you really got to make sure your shelf pins are correct.
Speaker 1Yeah.
Speaker 2Because they got to make contact. You can't put a little rubber stopper on one side because that probably would defeat it.
Speaker 1I saw these other things on Amazon. These are for fixed shelves, but they're LED channels that attach to the back of your shelf. And they have an LED that shoots up and down on the back of the shelf. It's cool. But when you think about it, like, why do you just want the back of your shelf to be lit? Like, cause I guess the books. Yeah.
Speaker 2But the idea there is lighting the front of the shelf can create some like awkward shadows. And if you're lighting the back, you're kind of eliminate that and you just get the ambience glow, which would kind of be cool.
Speaker 1There's so many different options now for how to light things. I mean, listen, I love it. I love everything lit up.
Speaker 2I want it all. Oh, I thought of something else to back up the conversation. You asked if I use the shaper to mortise out those hinges. I did not. But one of the other issues I ran into on this door was on the lower part, there was two panels. Okay. So there was a, like a top rail, a bottom rail, and then it was divided down the middle with a vertical style. So there was two separate panels on the bottom.
Speaker 1Yeah.
Speaker 2I wanted that style to go all the way up through the door and divide the top glass into two separate pieces too. The problem was I couldn't put that style in until after I cut my arc. I couldn't cut my arc until after I glued up the whole thing. So I glued up the whole thing. I cut my arc, but then I'm like, all right, now how do I get this style in there? I can't do mortise and tenon because there's no way I can get it in there. The whole door is glued up at this point. Can't use dominoes. But I had to cut this big rabbit anyways.
Speaker 2So I was like, all right, I'll just do a half lap and glue it in there. Problem was the bottom half lap is easy. It's pretty standard. The top one's a curved half lap. So I have to cut the curve on the style to match the arch that I cut twice with the perfect distance for the half lap, both on the exact same radius as my arch so i'm trying to think like how am i going to do this i used the circle cutting jig to cut
Speaker 2my arch it's like well i could use a circle cutting jig set at the same distance but then i got to attach it to my style right and i don't want to mark it up and then i was like well duh i got the flipping shaper i know the size of the circle so i just stuck the style on the shaper workstation designed two circles offset by exactly three quarters of an inch and just cut it on the shaper worked perfect.
Speaker 1Yet again the shaper to the rescue.
Speaker 2To the rescue and it's so nice that you can just design that on the machine too it's not like you gotta go to the computer and design something up you literally can just design two circles offset them by three quarters of an inch cut it's a beautiful thing done and done um.
Speaker 1Sorry, I was still trying to find accurate prices for these damn things because I just don't know what they're called. I thought they were called the Lukes.
Speaker 2But anyway.
Speaker 1Oh, wait.
Speaker 2Here it is.
Speaker 1Wireless adjustable. See, this is just the contact. 18 inch. 18 inch wireless adjustable shell. 18 inches is $ 62. That includes nothing else. Just the light bar that gets.
Speaker 2Put in the shell. Yeah, so to make it work. And that's just $ 18.
Speaker 1Let's go with this.
Speaker 2Let's say you have.
Speaker 1A 30-inch shelf. Then it's... Hello?
Speaker 2Oh, 36-inch shelf.
Speaker 1It's $ 85.
Speaker 2Okay.
Speaker 1And then, yeah, you still need the driver, the power, the contact switch.
Speaker 2Again, the money is like.
Speaker 1Yeah, but you got six shelves.
Speaker 2People who are putting this in, you're in way over $ 500.
Speaker 1That's $ 500 just for that. Yeah.
Speaker 2And that's just for the lights.
Speaker 1Yeah.
Speaker 2Yeah, that's kind of expensive for some ambiance, especially when there's way cheaper options on Amazon that work just as well, minus the adjustability.
Speaker 1I mean, maybe you could light up your router bit cabinet with something like this.
Speaker 2And honestly, you could probably buy the cheaper wired version on Amazon, and with a little MacGyver-nish, you could make them... Make them do the exact same thing. It wouldn't probably be a code, but you could probably wire it up to a metal plate on the bottom of a shelf and then wire the pin up. I mean, all you need is contact. Right. Talking about low voltage. I bet you could make it work.
Speaker 1Jeff Penman, the retired electrical engineer could work up something.
Speaker 2Oh yeah.
Speaker 1Easily.
Speaker 2Cause see, I'm actually toying around with this idea, something similar. One of my next builds in the shop is I got to do this bank of cabinets along the back wall. And then one of the cabinets is going to be the secret passageway that you push on the bank of cabinets. It's going to go like back and slide to the side. But the lower half of the cabinet is going to be drawers. Upper half of the cabinet is going to be glass cabinet doors.
Speaker 1Oh.
Speaker 2I want it to look like a regular cabinet, like there's no secret passageway. So in my mind, it would be very cool if it was lit up in there with LEDs. But once you engage the door... the lights go off and you can slide the whole thing back. So I would need some sort of like contact plate like that.
Speaker 1True.
Speaker 2In order to make the lights on when the doors shut. And then as soon as it breaks contact, the lights go off. Plus I can't have any cords or cables connect in that cabinet because it's got to be able to move freely. So that's been my thought. Can I wire all that into a contact plate inside the cabinet? Yeah.
Speaker 1Well, that's like the privacy glass on my office door. So there's a contact on the door that the wires then go into that LED or the privacy film. And then on the door jam is the contact.
Speaker 2Yeah, I mean, I'm sure you can buy a contact plate that you can wire the voltage wire into. I mean, that's got to be a thing.
Speaker 1It's probably the same thing as this.
Speaker 2I could probably even just hook it up into the magnetic latch, potentially. Yeah. And make that the contact plate. Yeah. I mean, that's metal on metal. It's obviously got electric current running through it already because it's an electromagnet.
Speaker 1But it's not 24 volt.
Speaker 2Does it matter?
Speaker 1I don't know. Maybe. I don't know either. I don't know anything about that.
Speaker 2I got to design that this week while I'm sitting on an airplane.
Speaker 1That's the next thing? Well.
Speaker 2It's the next major build. We got this build in Kentucky coming up that we're going to film and do a video on. I'll talk about that in a second. That one's going to be a doozy. And then when we get back, I'm going to need a little time to get supplies and everything organized for this build. So I think we're going to do a little shop update video because that'll be quick and easy to film while I'm organizing everything in the background.
Speaker 1Cheater.
Speaker 2Plus we got a bunch of little things that I need to do in the shop that we just don't have time. They're not enough to make a full video. So I figure if we do like a shop update video, but do all the little things in the video, like we got to run all the lines for the air compressor and get the air compressor hooked up. Cause I haven't had compressed air in my shop for months now, other than my little pancake compressor, which is a pain in the butt. So I want to hang up the hose reels and I got a nice big 60 gallon compressor from California, whatever tools.
Speaker 1What do you run? Are you running copper lines or?
Speaker 2I think it's aluminum. Like it's like aluminum coated in plastic. I mean, I ordered this whole kit to run. It's like flexible, but you can just like cut it. Yeah. And they're like push to fit connections.
Speaker 1Yeah.
Speaker 2Stick them together.
Speaker 1Okay.
Speaker 2So we got to do that. We got to hang the flat screen TV and connect the surround sound. I mean, you know.
Speaker 1Yes, people, for those of you who aren't following along, this is for his workshop.
Speaker 2All the little things that need to be done. Then I'm going to start working on these cabinets. I would be shocked if it's not at least a four-part video series because there's just so much going on in this one.
Speaker 1This big built-in that we're going to do in our bedroom. All lower cabinets that are Drawers and painted and then the uppers are all white oak curved cabinets with shelves and LEDs. And I'm not opposed to multi-part videos, but they just haven't traditionally done well for me. But I don't feel this is a video that you can do in one shot. It's just too much work. The problem
Speaker 1is there's going to be so much between each video that it's almost.
Speaker 2Like, I know, man, like my miter saw station, for example, did three videos on that thing. First video, 270,000 views. Like that's okay. Second video was literally just the hand carving of those like moth things. Yeah. That was like a man got 170,000 views. And then the final video. So three videos in 370,000 views. Hmm.
Speaker 1Yeah, but that came out within how many weeks of each other?
Speaker 2One after the other after the other. But people are used to your videos coming out farther apart. Like, I think it's fine.
Speaker 1But when you're looking for new viewers, like, who come in and watch, who want to see this build, and they're like, oh, wait, I'm going to wait friggin' four to six weeks for the rest of it. But I think it could be broken up into, like, the whole base, and then the uppers could be broken down, like, how I'm going to do these giant laminated arches.
Speaker 2Well, and you don't tell the people that it's part one until the end of the video. Oh. You get to the end of the video and be like, obviously, we're not going to finish this one in this video. Come back next time where we do blah, blah, blah. Come back next year.
Speaker 1Come back next season.
Speaker 2Don't tell them at the beginning of the video, like, this is part one. You're not going to see the whole thing. Because then, yeah, people will click off of it.
Speaker 1Oh, that's the secret sauce right there. Speaking of YouTube, you got this message that YouTube views are being counted differently now, for whatever reason. Did you see a huge uptick all of a sudden?
Speaker 2A little bit. Nothing crazy, though.
Speaker 1I saw enough where it was like, all of a sudden, my latest video was pretty dead, and then all of a sudden it cranked up 5,000 views in a day or two. That was weird. But the money went up a little bit, too, which But it also now gives you engaged views, stat versus views. So it said, I don't know, whatever, 125,000 views, but engaged views was only 118,000. Because now they're counting a view as the second someone
Speaker 1watches it.
Speaker 2Anytime anyone clicks on it.
Speaker 1And they shut off. I'm like, why? I don't understand. Again, I didn't read into it, so maybe there is some logic behind it.
Speaker 2All I care is if it makes me more money. They said it's trying to give... a more accurate representation of like your viewer potential to sponsors is what their like kind of language was.
Speaker 1Well, as long as they don't look at your analytics then because your average view duration is shit.
Speaker 2Yeah. Yeah.
Speaker 1Because of all this. Yeah. I don't really, you know, again, I, I just need to put out more videos faster. I am. I'm, I do have to get out at least, So this one I'm finishing up now really was supposed to be out tomorrow. I have until the 30th, but I wanted to get out tomorrow. It's just I'm almost done the voiceover, but I still have to do the intro and the thumbnail. And I don't even know what to title this thing because it was we can talk about this in the after show.
Speaker 2Did my schedule right now? What's the end of September? So, yeah, I only have up through the middle of December, but I've got. 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. I got 11 videos already on the schedule that I have to get done.
Speaker 1There's not even that many weeks left, is there?
Speaker 2There's 11 weeks left in the year.
Speaker 1Now on Christmas.
Speaker 2I guess I have two videos in one week I got to do. So what are your thoughts on this? I never do this, but I agreed to do a dedicated sponsor video.
Speaker 1All right, so this must have been a big payday. What's the company?
Speaker 2It's not even the biggest payday. I just kind of want this thing. It's F-U Makes. F-E Makes. I don't know how to say the name. I'm going to have to learn for the video. Michael Alm did a video on something similar. I don't know if it's the same company. It's basically, it's not a 3D printer. it's like a prints on anything printer. Like you can stick panels of
Speaker 2wood in there, glass in there. You can print flat, you can plant texture. So if you wanted to do like a duplicate of an oil painting, it'll print all the texture of the oil painting in there. Prints on ceramic prints on metal. It's got like a base, like a CNC. So you're confined to like the size of the space, but it's open-ended. So you can stick like a really long piece through there and keep moving it. Yeah. Um, But I just think it's got cool potential because you can print your own images. You can print like, you know, repeated designs, anything you want onto anything.
Speaker 1Well, here's the thing about a product like that. And I have a laser and I had agreed to get their new laser from X-Tool for a dedicated video and money or whatever. Because I was like, I can totally build an entire cool project just around this. And with that tool, because it does so many things, you can still do a really cool project. It's not like, hey, look, I printed out a photo. Like you can make a woodworking. project from that so yeah I am totally okay.
Speaker 2Well and I have a project in mind that I think it's a pretty simple project I'm not going to say what it is because it's kind of a cool idea but I think it'll be pretty easy to do and the thing I do with these dedicated videos is I'll release them on like a Wednesday hmm I never put them out as like my main video that week. So we could probably film this project in a day. It'll go out on a Wednesday and then we'll still do a video that Saturday. Cause I don't want to like, I don't want people to be annoyed. Like, Oh, we didn't get a video this week. We just got this stupid ad. So whenever I do a dedicated video, which
Speaker 2I've only done one other one, which is for a fire pit. And it was simply because they paid me a little stupid amount of money to do it.
Speaker 1Hey, listen, Sometimes. I mean, it would be different, Jason, if you were putting out a video every six to eight weeks like me. But when you're putting out a video a week, the content just keeps rolling. What's the difference? You're still going to put your spin on it. You're still going to make it fun and enjoyable.
Speaker 2Unlike the other dedicated video, this will still be a project that I'm building. The other one was like, look at this fire pit. Here's all the features. It was so stupid.
Speaker 1It's hard not to sound salesy.
Speaker 2Yeah.
Speaker 1Um, and something like that. So I think like what I was going to do with the laser is I was going to cut a bunch of templates for different things, whether some kind of piece of furniture, some curve templates and make your bending forms with it. And, you know, I, I hadn't thought of an exact project, but like, there's definitely something I can do with this. Um, but then it, then it got to the point where I'm like, To take the laser I have now, get rid of that, bring in a whole nother laser. Like it didn't really make sense because the money wasn't tremendous. I mean, the
Speaker 1machine itself was like $ 9, 000 retail, but again, that doesn't pay the mortgage necessarily.
Speaker 2The other cool thing about this machine is it's an upgrade, but they're sending it to me. It comes with this rotating axis thing that you can put in the printer. So then you can print on coffee mugs, on like Stanley tumblers, glass, you know, like pint glasses.
Speaker 1See, now you can have, you can have Craig doing a little side hustle. You don't even have to get J cats to make your merch. You can print it.
Speaker 2Problem is it's big and I don't know where I'm going to put it. My shop's so small.
Speaker 1You have to put another edition. That's my problem. I have no room for any of this stuff.
Speaker 2Hey, we just finished our edition. Um, Pretty much. We got it all drywalled, electricals all in there, plumbing, got the new garage door up, insulated. Dude, here's the crazy thing, all right? When we put the dust collector outside, everyone was like super concerned because the filter at the time was also outside. And they're like, you're just going to suck all of the climate controlledness out of your shop and basically dump it outside, which is true. We have
Speaker 2the air conditioner on inside. We turn the dust collector on. It's sucking the air out of the shop, which is the cooled air, and it's going through the filter. And then instead of being returned back into the shop, it's dumping it outside. It was until we built this little addition. And now the filter is all inside there. It's plumbed through the wall. It's inside. But there's still a door between our shop and the addition. So what we're going to do in our shop update video, another little project, We're going to cut a hole in the wall, put a vent that has a filter that you can change
Speaker 2out in the wall so that that air can go from the addition into the shop.
Speaker 1And back in, return back in.
Speaker 2Now, I was concerned, like, is there going to be enough air pressure to move air through that vent when we put it in there? But now that we have the garage door in, that whole thing sealed up, if you turn the dust collector in the shop on, The pressure builds up so great in there that if the door is open between the shop and that room, you physically cannot shut the door.
Speaker 1Oh my gosh.
Speaker 2With the dust collector on. It is like pushing against an airbag. Like you cannot get the door shut. There's so much pressure. So once we cut that vent in there, it's just going to be blowing like no problem.
Speaker 1That's the problem you're going to get. I mean, because even though that air is going through a filter, it's still a little dust in it, right? When it's coming back through the HEPA filter or whatever. So now are you just going to have a sea or fog of dust blowing back in?
Speaker 2I don't know, man.
Speaker 1I mean, if you're going to put a filter on it.
Speaker 2Yeah, well, there's going to be a filter on the vent too, on both sides. So it'll be triple filtered at this point. It'd be like a fine vodka.
Speaker 1Hopefully it doesn't completely. It's not like a clipper ship in there. Like when you're in the crow's nest of a clipper ship and the air is just blowing. There's a giant big-ass fan.
Speaker 2Well, I was a little concerned because the pressure builds up so much in there. Like we just put in this new garage door with the glass panels. I was like, is it going to blow out the panels on the glass door?
Speaker 1Like, ah, ah. It could. I'd be nervous about that.
Speaker 2But I just leave the door cracked for right now. Seems to work out. But I haven't noticed a lot of dust coming out of that filter.
Speaker 1It does a pretty good job filtering it out.
Speaker 2Yeah. All right. Should we go over to the after show?
Speaker 1Yeah.
Speaker 2Want to shout out our returning top tier patrons real quick. We got John Amick, Jeremy Rao, Brandon Remy, Chris Hulett, Jamie Gosney at Buzzsaw Creations, Joe Welsh at the Delaware Valley Workshop, Sean McDonald, Steve I. Design, Paul Diabartolo, Bill Burkle. WTB Woodworking, Jose Fantin, Fantin Woodworking, Henry Lutens, Ray Rodriguez, Mike Leiden, Eric Spensley, and Yono Reich. And I will
Speaker 2say to all of our returning top tier patrons, if you want your business name, shout it out as well. You got to do what some of these guys do and you got to put it in the name line because the way Patreon works, does it now I can't see it unless it's like right next to your name so put your name and your business name in the same line and I'll shout it out and if you're not a patron and you want to follow us over to the after show go to patreon.com slash shop sounds podcast sign up and we'll see you over there see ya
Mary returns to the podcast and her stools are famous! Keith has taken on more walnut than he can handle and Jason continues on his quest for engineering greatness with his secret bookcase! Oh, and more stuff, too. Be...
Keith and Jason are Mary-less again this week and have a lot to catch up on. Jason returns from Montana with mighty tales of elk hunting. And back in the shop, progress continues on his hidden bookcase while the...
Keith and Jason fly solo (or duo, actually) again this week and have a lot to catch up on. Jason recounts his trip to Buffalo Trace to build a barrel stave whiskey cabinet (you can still buy raffle tickets here:...
In this week's episode, the MothMan returns from his Yellowstone trip to tell tales of an expensive week of wrecked tools, chainsawing his door into place and trying to behead a dead deer. Keith has lost his sense of...
In this week's episode, Jason is on hiatus, so our good friend Shawn Kirsch joins Keith and Mary to talk about, well, everything and everything...from IWF, travel gripes, stool cushions with the foam that is too thick...