
Is this your show? Claim this page
PodCred
The people behind this show
People get invited back because someone remembered they were great.
PodCred is the verified record of who made this show. A credit here means people who were there confirmed the work.
Hosts
Who is on this show?
Think of the guest you still think about. The producer who makes the host sound smart. The editor who saves every episode. If a name is missing here, that person is invisible everywhere.
Add a creditEpisodes
205 episodesReliability Matters at 200: The Conversations, Lessons, and People Behind the Podcast - Episode 200
Reliability Matters at 200: The Conversations, Lessons, and People Behind the Podcast Reliability Matters has reached its 200th episode! In this special solo episode, host Mike Konrad looks back at the conversations,...
Good Adhesive, Bad Bond: David Dworak on the Hidden Causes of Adhesion Failure - Episode 199
Adhesive failures can be frustrating because the problem isn’t always obvious. The adhesive may have been properly selected, the part may look clean, and the process may seem under control. But weeks or months later, a...
Why Your Al Training Isn't Sticking: Sean Patterson on Making Al Useful in Manufacturing - Ep. 198
Artificial intelligence is everywhere right now. It’s in the headlines, it’s being built into software tools, and it’s showing up in more and more conversations about engineering, manufacturing, quality, and process...
Closing the Gap Between Validation and Reality with Dr. Nishith Kumar Reddy Gorla - Episode 197
What if passing the test is not enough? In reliability engineering, we often place a great deal of confidence in laboratory validation. We test, measure, analyze, and document. And when the product passes, we naturally...
If We Don't Shape Al, Al Will Shape Us - Dr. James Maisiri on Responsible Technology Adoption # 196
Today, we’re going to explore a topic that seems to be touching nearly every industry, every workplace, and increasingly every part of our daily lives: artificial intelligence. But this conversation is not just about...
The Return of Cleaning: Why Post-Reflow Cleaning Is Becoming Mainstream Again (Part 2) - Episode 194
This is part two of a two-part series. In Part One, we explored how the electronics industry transitioned from a clean-everything approach to one where cleaning became optional. But what happens when the assumptions...
The Return of Cleaning: Why Post-Reflow Cleaning Is Becoming Mainstream Again - Episode 193
This is the first of a two part series. For decades, cleaning circuit assemblies after soldering was not optional. It was standard practice across the electronics manufacturing industry. Then, almost overnight, that...
Why PCB Revision Errors Are a Hidden Reliability Risk With Mehdi Nahali - Episode 192
Today, we’re going to explore a topic that doesn’t always get the attention it deserves, but has a direct impact on product quality and long-term reliability. I’m joined by Mehdi Nahali, founder of PCB Revision Control...
Why Maintenance Is Finally Getting a Seat at the Table With Limble's Paul Ross - Episode 191
Today’s episode is going to resonate with anyone responsible for uptime, efficiency, and ultimately, product reliability. Because whether we’re talking about circuit assemblies, manufacturing lines, or entire...
Predict, Prevent, Produce: RoviSys' Bryan DeBois on Manufacturing's Al Future Episode 190
What if your factory could predict failures before they happen, capture decades of human expertise, and make better decisions than ever before - without replacing the people who run it? Today’s guest sits right at the...
From the Factory Floor to System Design: Why Women in STEM Matter with Kristen Eckart - Episode 189
When we talk about reliability, we usually focus on materials, processes, test methods, and standards. But what if one of the most overlooked reliability risks is who is not at the table when engineering decisions are...
An Academic Look at Al in Electronics Manufacturing: Where It Works, Fails, & Why It Matters - # 187
Artificial intelligence is being promoted as the next revolution in electronics manufacturing, but what happens when the people evaluating it aren’t traditional AI experts, aren’t software vendors, and aren’t selling...
Readiness Through Repair: How the U.S Military is Strengthening Capabilities with Right to Repair - Episode 186
If a $26,000 drone repair can be done in the field - but policy says it has to be shipped back to the manufacturer, do you really have a reliability problem… or a repair access problem? Today on the show, I’m joined by...
Electronics Manufacturing Today: Pressures, Priorities, and the Path Forward With Trevor Galbraith - Episode 186
When you talk to one manufacturer, you hear a story. When you talk to hundreds, patterns emerge. Today, we step back and examine what those patterns tell us about the real state of electronics manufacturing. Today’s...
How Accuracy & Force Compliance Contribute to Better Quality & Reliability with Michael Sivigny
In electronics manufacturing, defects don’t usually announce themselves. They happen in milliseconds, far faster than human perception, and often long before anyone realizes a process has drifted out of control. By the...
Advances in Dispensing Automation and Thermal Management with PVA’s Jon Urquhart - Episode 184
Today, I’m joined by someone who has spent more than three decades at the intersection of materials science, automation, and high-reliability manufacturing. Jon Urquhart is the Director of Global Applications...
Preserving Knowledge,Advancing Reliability: A Reliability Matters Podcast Year-End Reflection - #183
Since 2018, Reliability Matters has been building a knowledge vault, capturing the wisdom of industry experts for engineers everywhere. In this special year-end episode, we celebrate the journey, the growth, and the...
Getting it Right: How to Work Effectively with your CM - With Daniel Stanphill & Sean Kincaid
Today, we’re continuing our dive into the world of contract manufacturing - a vital piece of the electronics ecosystem. Joining me are two industry leaders who know this space inside and out. First, we have Daniel...
What Every OEM Should Know About Working with Contract Manufacturers - With Raymond Novara
The next two episodes will be all about contract manufacturing, an area that can make or break the reliability and success of a product. My guest on this episode is Raymond Novara, founder and owner of East End...
Cooler Connections: Low Temp Soldering for a High-Reliability World With Indium’s Dr. Hongwen Zhang
This is the fourth of four episodes on the subject of soldering materials. Today, we're diving into a topic that's reshaping how we think about thermal management, energy efficiency, and long-term performance in...
Building Reliability from the Inside Out: Indium's CEO’s on Innovation & Reliability with Ross Berntson
This is the third of four episodes on the subject of soldering materials. Today, we’re continuing our deep dive into the world of soldering materials, from advanced alloys and flux chemistries to global manufacturing...
Behind the Alloy: Soldering Materials, Process Control, & Reliability Shantanu Joshi & Greg Starrett
This is the second of four episodes on the subject of soldering materials. In today’s episode, continuing the subject of soldering materials, diving deep into the science, strategy, and subtleties behind one of the most...
SMTAI 2025 Conference & Event Preview - Special Episode
This episode is all about SMTAI, surface mount Technology International, taking place OCTOBER 19 - 23, 2025 at the DONALD E. STEPHENS CONVENTION CENTER in ROSEMONT, ILLINOIS. SMTA International is the premier gathering...
The Chemistry of Reliability: Choosing the Right Solder and Flux: A Conversation with Chris Ward
This is the first of four episodes on the subject of soldering materials. In this episode, I’m joined by Chris Ward, founder and Managing Director of Solderking Assembly Materials Limited, a UK-based manufacturer of...
Humidity: Small Cause, Huge Reliability Risk with Viktoria Rawinski - Episode 177
On this episode of Reliability Matters, we’re diving into a deceptively simple but incredibly important topic, humidity, and the massive impact it can have on electronic assembly reliability. Joining me is Viktoria...
War Stories from the Line: Phil Zarrow & Jim Hall Talk Reliability - Episode 175
Today, I’m joined by two of the most respected names in the electronics manufacturing industry, Phil Zarrow and Jim Hall. Together, they bring decades of hands-on experience and unparalleled insight into the challenges...
AI in PCB Design - It's Already Here! With David Wiens & Stephen Chavez, Siemens EDA. Episode 174
In this episode, we’re diving into a topic that’s rapidly reshaping our industry: Artificial Intelligence in PCB Design. Far from a futuristic concept, AI is already being integrated into advanced design tools -...
Improving the Reliability of Public EV Chargers with ChargerHelp! Co-Founder & CEO, Kamale Terry
As the electric vehicle market accelerates, the reliability of the charging infrastructure becomes increasingly vital. Chargers that are down or malfunctioning can hinder adoption and erode consumer confidence. But who...
Episode 172: From Chaos to Control: Steering ERP Projects Back on Track with Chintan Sutaria
Today we're diving into a topic that keeps many executives awake at night - ERP implementations. More specifically, why so many of them fail and, perhaps more importantly, how to fix them midstream before they derail...
Pick & Place Machine Selection and Optimization with Hanwha Semitech Americas CEO, Tim Kang - Episode #171
Today we're turning our attention to a cornerstone of modern electronics manufacturing: pick and place technology. Joining me is Tim Kang, CEO of Hanwha Semitech Americas. With nearly two decades of experience in the...
Episode 170: Reliability, Safety, and Human Impact: The DMR Approach with Dheeraj Narang
Today we're exploring a concept that has deep roots in process safety and infrastructure management, but also has meaningful applications in electronics manufacturing: Damage Mechanism Reviews, or DMRs. My guest today...
Reliability Matters on the Road in Anaheim California at the IPC APEX Expo - Episode 169
On this episode of the Reliability Matters podcast, I left my usual studio for the IPC APEX Expo in Anaheim California. I interviewed two subject matter experts on topics related to electronic assembly. My guests are:...
Reliability Matters on the Road in Anaheim California at the IPC APEX Expo - Episode 168
On this episode of the Reliability Matters podcast, I left my usual studio for the IPC APEX Expo in Anaheim California. I interviewed three subject matter experts on various topics related to electronic assembly. My...
Episode 167: Meet the Press: A Conversation with Journalist and PCEA President, Mike Buetow
Today, we’re diving deep into the world of electronics manufacturing from a unique vantage point - that of the press. My guest today is someone who has spent decades at the forefront of reporting on the electronics...
Electronics: Down Memory Lane and a Vision for the Future - Episode 166
This episode is a little different in two ways. First, I didn’t record it in my studio. I recorded it at the SMTA Pan Pacific strategic Electronics symposium, affectionately known as PanPac, in beautiful Maui Hawaii....
Stencil Design and Manufacturing Best Practices with Elias Malfavon Jr.
Today, we’re putting the spotlight on a critical component in surface mount technology, the stencil. These precision-engineered tools are the unsung heroes of electronic assembly, playing a pivotal role in ensuring...
AI Integrated Supply Chain Management Software with Sebastian Schaal
Today, we're tackling a topic that has become increasingly vital in recent years: supply chain management. With global supply chains recently under immense pressure from disruptions, shortages, and growing complexity,...
Battery Selection and Safety Best Practices with Alex Norman
Today we’re diving into a critical yet sometimes overlooked component that powers so many of the devices we rely on: batteries. Batteries are the heartbeat of countless electronic products, from medical devices and...
Electronics Testing Best Practices with Robert Boguski- Episode 162
On this episode, we’ll dive into the world of electronics testing with an expert within the electronics testing industry, Robert Boguski, President and Owner of Datest. Robert brings 44 years of experience in the...
AI-Based Inspection Technologies with Priyansha Bagaria - Episode 161
Today, we’re exploring a transformative topic: AI-based inspection technologies. Artificial intelligence is revolutionizing how we detect, analyze, and address defects in the electronics assembly process, combining...
Posts
No posts yet. Posts Reliability Matters shares on PodSubs, and what it publishes on Substack, YouTube and its own site, will show here.

Subscribe
Be on the front line of the show
Everything Reliability Matters sends its own people, first. Resources, announcements, behind the scenes, events, and giveaways, straight from the host. No account needed.
- The resources the host shares with subscribers
- Announcements before anyone else hears
- Behind the scenes from the team
- Events, invitations, and giveaways
- Only what the host sends, nothing else
Audio and video play straight from the show's own hosting. PodSubs stores and serves no media.














