Skip to content
PodSubs
ShowsPeopleGuestsJobsNewsEvents
More
BlogPodCred
Menu
ShowsPeopleGuestsJobsNewsEventsBlogPodCredNetworksSign in
Join nowSign in
  • Shows
  • People
  • Jobs
  • News
  • More
    • Guests
    • Events
    • Blog
    • PodCred
    • Networks
    Join nowSign in

Reliability Matters

Reliability Matters artwork

Episode 99: A Conversation about the IPC Cleanliness Standard & How to Comply with Graham Naisbitt

Jul 12, 20221 hr 4 minAudio

Today, we're going to talk about cleanliness testing of post-reflowed circuit assemblies. In late 2018, IPC shocked the electronic assembly community by introducing an amendment to section 8 of the J-STD-001G. This amendment radically changed the way industry determines cleanliness. Now, assemblers must prove their assemblies are clean enough not to experience electro-chemical migration events which would cause the assembly to fail. This new process of obtaining objective evidence has been met with a considerable degree of confusion. To help clear up the confusion, I invited Graham Naisbitt to be my guest. Graham is an IEC 1906 Lord Kelvin Award Winner, IEC TC91 WG2, 3 and 10 Maintenance Leader of 4 Standards. Graham is Vice-Chair of the IPC 5-30 Cleaning and Coating Sub-Committee which oversees 15 IPC Standards Development Committees and recipient of 14 IPC Standards Awards. Graham is also a British Standards Institution EPL-501 Member. Graham is a specialist in Surface Insulation Resistance Testing, Ionic Contamination Control, Solderability, Conformal Coating materials and application systems, Cleaning, Inspection and Test. Graham's Webinar: "Predicting Reliability in Electronics" with experts Graham Naisbitt and Chris Hunt https://iconnect007.com/index.php?cID=854 Graham's Book: "The Printed Circuit Assembler's Guide to Process Validation" https://iconnect007.com/my-i-connect007/books/process-validation/ Graham's Contact Info: graham.naisbitt@gen3systems.com Be part of our Reliability Matters 100th episode. You can watch it here on this channel on YouTube: https://www.youtube.com/watch?v=fcnA_7G-GRA Or, watch on LinkedIn using the following link: https://www.linkedin.com/video/event/urn:li:ugcPost:6916632834543681536/

Audio and video play straight from the show's own hosting. PodSubs stores and serves no media.

Hosts and Guests

Nobody is credited on this episode yet.

Credit the people on this episode

Be the first to rate this episode

More episodes

All episodes
  1. Reliability Matters at 200: The Conversations, Lessons, and People Behind the Podcast - Episode 200

    Aug 25, 202616 minAudio

    Reliability Matters at 200: The Conversations, Lessons, and People Behind the Podcast Reliability Matters has reached its 200th episode! In this special solo episode, host Mike Konrad looks back at the conversations,...

    Credit the people on this episode

  2. Good Adhesive, Bad Bond: David Dworak on the Hidden Causes of Adhesion Failure - Episode 199

    Aug 11, 202616 minAudio

    Adhesive failures can be frustrating because the problem isn’t always obvious. The adhesive may have been properly selected, the part may look clean, and the process may seem under control. But weeks or months later, a...

    Credit the people on this episode

  3. Why Your Al Training Isn't Sticking: Sean Patterson on Making Al Useful in Manufacturing - Ep. 198

    Jul 21, 20261 hr 9 minAudio

    Artificial intelligence is everywhere right now. It’s in the headlines, it’s being built into software tools, and it’s showing up in more and more conversations about engineering, manufacturing, quality, and process...

    Credit the people on this episode

  4. Closing the Gap Between Validation and Reality with Dr. Nishith Kumar Reddy Gorla - Episode 197

    Jul 7, 20261 hrAudio

    What if passing the test is not enough? In reliability engineering, we often place a great deal of confidence in laboratory validation. We test, measure, analyze, and document. And when the product passes, we naturally...

    Credit the people on this episode

  5. If We Don't Shape Al, Al Will Shape Us - Dr. James Maisiri on Responsible Technology Adoption # 196

    Jun 23, 202648 minAudio

    Today, we’re going to explore a topic that seems to be touching nearly every industry, every workplace, and increasingly every part of our daily lives: artificial intelligence. But this conversation is not just about...

    Credit the people on this episode