Skip to content
PodSubs
ShowsPeopleGuestsJobsNewsEvents
More
BlogPodCred
Menu
ShowsPeopleGuestsJobsNewsEventsBlogPodCredNetworksSign in
Join nowSign in
  • Shows
  • People
  • Jobs
  • News
  • More
    • Guests
    • Events
    • Blog
    • PodCred
    • Networks
    Join nowSign in

Reliability Matters

Reliability Matters artwork

Episode 114: The Remarkable Return of the Post-Reflow Cleaning Process

Feb 21, 20231 hr 12 minAudio
ShareXLinkedInFacebookWhatsAppEmail

On this show, we’ve discussed many aspects of the Electronics assembly process. We talked about reflow, thermal management, printing, soldering materials, additives, and so much more. What do all these topics have in common? When done correctly, they all contribute to the reliability of circuit assemblies. Today, we’re going to dive into the subject of cleaning circuit assemblies after reflow. For many assemblers, the cleaning process was replaced by the use of no clean flux technology. Time and technology have eroded the concept of allowing all residues to remain on the assembly. Today, residue caused failures are such a concern, that IPC recently and radically changed the way circuit assemblies are considered to be clean. My guests today are Sal Sparacino and Eric Camden. Sal is Director of Sales at Zestron Americas, located in Manassas Virginia. Zestron is a manufacturer of cleaning chemicals for the electronics industry. Eric is Lead Investigator for Foresite, an analytical laboratory based in Kokomo Indiana. Eric, is the guy you call when things go wrong. Together with my experience as a cleaning equipment manufacturer, we’ll discuss how cleaning contributes to increased reliability, and we’ll review the reasons cleaning has returned as a mainstream assembly process. Guest Contact Info: Sal Sparacino sal.sparacino@zestronusa.com https://www.zestron.com Eric Camden ericc@foresiteinc.com https://www.foresiteinc.com

Audio and video play straight from the show's own hosting. PodSubs stores and serves no media.

Hosts and Guests

Nobody is credited on this episode yet.

Credit the people on this episode

Be the first to rate this episode

More episodes

All episodes
  1. Reliability Matters at 200: The Conversations, Lessons, and People Behind the Podcast - Episode 200

    Aug 25, 202616 minAudio

    Reliability Matters at 200: The Conversations, Lessons, and People Behind the Podcast Reliability Matters has reached its 200th episode! In this special solo episode, host Mike Konrad looks back at the conversations,...

    Credit the people on this episode

  2. Good Adhesive, Bad Bond: David Dworak on the Hidden Causes of Adhesion Failure - Episode 199

    Aug 11, 202616 minAudio

    Adhesive failures can be frustrating because the problem isn’t always obvious. The adhesive may have been properly selected, the part may look clean, and the process may seem under control. But weeks or months later, a...

    Credit the people on this episode

  3. Why Your Al Training Isn't Sticking: Sean Patterson on Making Al Useful in Manufacturing - Ep. 198

    Jul 21, 20261 hr 9 minAudio

    Artificial intelligence is everywhere right now. It’s in the headlines, it’s being built into software tools, and it’s showing up in more and more conversations about engineering, manufacturing, quality, and process...

    Credit the people on this episode

  4. Closing the Gap Between Validation and Reality with Dr. Nishith Kumar Reddy Gorla - Episode 197

    Jul 7, 20261 hrAudio

    What if passing the test is not enough? In reliability engineering, we often place a great deal of confidence in laboratory validation. We test, measure, analyze, and document. And when the product passes, we naturally...

    Credit the people on this episode

  5. If We Don't Shape Al, Al Will Shape Us - Dr. James Maisiri on Responsible Technology Adoption # 196

    Jun 23, 202648 minAudio

    Today, we’re going to explore a topic that seems to be touching nearly every industry, every workplace, and increasingly every part of our daily lives: artificial intelligence. But this conversation is not just about...

    Credit the people on this episode