Skip to content
PodSubs
ShowsPeopleGuestsJobsNewsEvents
More
BlogPodCred
Menu
ShowsPeopleGuestsJobsNewsEventsBlogPodCredNetworksSign in
Join nowSign in
  • Shows
  • People
  • Jobs
  • News
  • More
    • Guests
    • Events
    • Blog
    • PodCred
    • Networks
    Join nowSign in

Redefining Plastics

Redefining Plastics artwork

Recycling Collaboration, EPR, and Building End Markets with PLASTICS Industry Association

Oct 20, 202630 minAudio
ShareXLinkedInFacebookWhatsAppEmail

This was the third episode recorded at the National Plastics Conference (NPC), and the NPC Live podcast studio onsite. Thanks again to PLASTICS for having Redefining Plastics at the conference and all of their support. In this episode, Justin Riney hosts Kellie Alvarado (Director of Sustainability, Anchor Packaging) and Andy Brewer (Director of Sustainability and Recycling, Plastics Industry Association) to discuss a new Polypropylene recycled bale study led by PLASTICS, recycling advocacy, collaboration, and EPR policy. Alvarado argues there is no “evil material,” emphasizing plastics’ role in food packaging and waste prevention, while Brewer describes Plastics’ member base and how its recycling committee and end-market programs connect the full plastics supply chain. This collaboration is key to solving any of the problems the plastics industry faces today. The group discusses EPR as a valid approach to fund infrastructure but warns against rushing implementation and inconsistent “rates and dates,” citing Oregon depots and a polypropylene bale study project in Colorado. They stress improving consumer trust through public tours of plastic facilities, transparency, and positive feedback. We loved this conversation and hope that you will learn something from their expertise. PLASTICS https://www.plasticsindustry.org/ https://www.linkedin.com/in/jbrewer1/ Anchor Packaging https://www.anchorpackaging.com/ https://www.linkedin.com/in/kellie-6a05624/ National Plastics Conference https://nationalplasticsconference.org/ Redefining Plastics https://www.redefiningplastics.com/ https://rss.com/podcasts/redefining-plastics-with-justin-riney https://www.instagram.com/redefining_plastics/ https://www.linkedin.com/in/justin-riney-mba-67685940/ https://youtube.com/@redefiningplastics?si=KvG4dTvY1lALbwIm

Audio and video play straight from the show's own hosting. PodSubs stores and serves no media.

Transcript

From the show. Tap a time to play from there.

Welcome to Daddy's Podcast. This is the Redefining Plastics Podcast. All programs and projects at the Plastics Industry Association comply with antitrust policies. Welcome to the Redefining Plastics Podcast. My name's Justin Riney. I am at NPC still, so this is probably going to be the third or fourth episode from MPC that I put out. We're going to start with a quick shout out for MPC itself. This is the first time I've

been to this show. And I've absolutely loved it. They've set up a pretty cool little podcast studio, NPC Live. It's been a lot of fun. It's been great talking to everybody. But I've got a fun conversation today on recycling, which is my favorite topic on earth. But why don't we start? Kelly, why don't you introduce yourself, who you work for, and all that good stuff. Yeah, happy to be here. Thanks, Justin. I'm Kelly Alvarado. I'm Director of Sustainability for Anchor Packaging, and I also love all things recycling. It's been

a great conference so far, and the energy and the people here are just incredible. Yeah. Excellent. And I am Andy Brewer. I'm the Director of Sustainability and Recycling for the Plastics Industry Association. about six years right over six years now and i come from the industry so hands -on experience in the injection molding space shifted into a sustainability role with plastics you know what's funny to me is i first said to whitney i was like you're gonna have to point out andy to me

because i've been on some calls with him like i've never met him in person and her response was just find the tallest redhead you can see and That'll be him. Oh, oh, that guy over there. I got it. I got it. I am the tallest person at the Plastics Industry Association. Yeah. So that is the title I hold with our staff. And I remind them each year. I'm sure very excited about that. Yeah. It's a tall order to be in Andy's presence. It really is. In a world of Zoom, when people meet me in person, it is shocking. There are a couple of things we wanted to talk about. But Kelly, you and I run in similar circles. We're

advocacy for. recycling for the plastics industry, specifically for the company that you work for. And it's a struggle. We were talking about that a little while ago here. I think the thing that is most interesting to me is the amount of people that don't really understand the battle that we're in and the battle that you and I love to fight, I think. I think we can say that. What would you say to somebody that's not involved in plastics, not involved in the discussions?

Because maybe fight's not the right word, but at least discussion with regulatory. What would you say to somebody that is not here today? Yeah, I would say that there is no evil material and that choosing the right material for the right job helps us actually have the least amount of impact on the planet as possible. And I'm in my current role because plastic is important. And because it provides sustainable options, solutions, and it's a product that we really

don't want to live without. It was invented and particularly in the segment that I'm in, which is food packaging. If there wasn't food, we wouldn't need packaging. And if our whole mission is to protect and preserve food and eliminate waste, how are you going to do some jobs without some of the materials that... It's a pretty simple explanation. I like that. I like brevity. What do you think, Andy? Your pitch for somebody to join the Plastics Industry Association? To join

the association? Yeah. Yeah, I mean, we are a really diverse group of member companies that are part of our association, and we break it down into three buckets, typically, which is our processor and converters, which is what Kelly's in. We have material suppliers, folks who are making the resin, and then we have the equipment manufacturers. I mean, to join the association, it can be a small family owned company. That's where I come from. And then we get to work with all these enormous global companies. If your company is looking for more of a voice in the industry, and maybe you don't have the staff

that is available to fight the fight on the regulatory side or the advocacy side. That's why a lot of folks join our association. They want to be part of something bigger. And we are, you know, known as kind of a voice for the industry. I think one of my biggest kicks over the last several months, and specifically yesterday on my panel, is collaboration. If we don't collaborate as an industry, we're not going to solve for the real issues we do have. We're a great industry.

We talked earlier today about the impact that our industry has and the scale of our industry and why it's important to preserve. We all work with people that... we love dearly and we want to make sure that they're all employed, which is why we kind of do what we do. I'm going to speak for you right now, but I know that's why I do what I do. But I think if we're not collaborating and we're not working together, we're not going to solve the real issues we do have, which is we need to do more recycling, right? And that's,

Andy, your primary focus, right? Within the organization. You want to talk a little bit about how that works on a day -to -day? Yeah. I mean, going back to our... member base, we have such an awesome advantage. And I don't know, we can tell the whole story with our group of members that we have. So any recycling project we tackle, we are able to look at the very start, which is coming from supply and everybody in between to putting that recycled material into an end part or end product. So when we develop programs,

members like Kelly and Anchor Packaging, they jump on board. They want to be involved. They want to Number one, showcase their expertise and technologies that they have, but also they're trying to find solutions for the products that they make. So it's really important and we are able to engage that full supply chain. And that's kind of what we do within the recycling committee that I lead and our new end market opportunities programs. What do you think, Kelly? No, I think it's amazing. Yeah. Well, and like Andy was saying, Anchor. We joined because of the resources that

they have and the connections and the ability to be involved and to have a voice and to collaborate on pre -competitive areas that move the whole industry forward. Yeah. So we started the Polystyrene Recycling Alliance, which is a part of Plastics. And we've been very, very happy with that partnership working with Plastics. I have been a part of projects where we're funding projects that will

help my direct competitors. And I don't care. You know why? Because it makes it so we recycle more polystyrene, which is what we need. And pre -competitive, the same thing we talked about. I want to make sure that my products, polystyrene in my case, ends up being recycled more. And I know you feel the same way. And the entire industry feels that same way. When you come together in a group like Plastics, you really can get together and say, well, here's the problem. I

have asset A, you have asset B. You put those two things together, we make the project work. And without that collaboration, it's never going to happen. So for me, we need more of that. We need more people involved in Plastics. We need more people involved in Polystyrene Recycling Alliance, selfishly. And then we need more people to do the other self -funded groups. Do you want to talk a little bit more about some of the other self -funded groups within plastics when it comes to recycling as the fire alarm goes off in the

background? Is that a fire alarm? I think so. You know what? That just means we need to pay attention now. Yes, we have. I mean, the other one to mention is the Flexible Film Recycling Alliance. That is something we developed a few years ago. Our sustainability team did. Really, the focus was to promote and advocate for films and flexibles. At a higher level, we wanted to take a look at the current film directory, which is a resource that consumers can use and go in

and type in their zip code or location and find out where to take their film products. We wanted to take that directory and build more transparency around it. I talked about this yesterday a little bit. We had a couple articles over the past years where people are putting trackers in. bags, putting trackers in Starbucks cups, figuring out where these materials are going. Please don't do that. Yeah, please don't do that. It's a fire hazard. Yes. Yeah, pun intended there with the fire alarm. Yes, but we wanted to build in a validation component

to store drop -off. So that is working with the big grocery stores and retailers and saying, hey, you are recycling products properly. You have bins at your store in place. And it's going to the proper end markets. So that validation program is being developed right now. But it's with a huge group of all the film players. It's a really, really big group that's been growing exponentially here the past few years. So, yeah. Yeah, I came out of the film industry. That was one of my first roles in the plastics industry.

So I'm a huge fan of that effort. I'm the guy that goes into Harris Teeter in my local area, the Kroger. And people will be complaining about the plastic bags and pointing out the drop off out front and be like, well, actually, I'll talk to these people because I'm that lunatic at every single store. And I know that we all kind of share that same passion to talk about our industry. But yesterday we were talking a little bit about eco modulation and EPR and everything that's

coming on the panel that I was on. I did want to talk a little bit about EPR today and how that's going to impact. industry and what our thoughts are, I think overall, from an anchor packaging perspective. Kelly, what do you think about EPR? I'm of two minds, really. And this is a Kelly opinion. Yeah, perfectly fine. I think the goal and the thought behind EPR is valid.

I agree. And I absolutely think we need infrastructure. in recovery and building out how we collect, sort, and turn things back into products. We don't have that. Our country has never approached recycling and infrastructure from a holistic or even regional standpoint. It's always been local and municipal. So there's not a lot of consistency in our structure. With that, then there's no consistency for consumers. Like if

you live in Chicago, you can't do the same thing as living in Boston. 6 ,000 different municipalities with all different structures. So the intent of focusing the reduction of waste and eliminating things going to landfill and returning to a viable use, I absolutely think that that's a good thing. I think it should be done maybe a little slower and a little more methodically. And there should be consistency on how materials are treated. That's the thing that really doesn't sit well

with me right now. I think to your point of the consistency on materials treated, I think a lot of that has to do with kind of what's going on in California right now with rates and dates. And rates and dates, I think, are never a good idea because you can't track it. It's tough to know how much material is even coming into a state. So you don't even know the denominator before you try to figure out what the numerator is, which is also difficult because, as most of us know in the industry, the majority of all

recycling happens outside of the MRF system, and that's what they're tracking. So from a plastics perspective, I know that, for the most part, that's a consistent feeling. But from the Plastics Industry Association standpoint, what do you think about EPR? Yeah, I mean, we're all for it, but... You know, to reiterate what Kelly said, it has to be done realistically. We can't rush into this. It is an enormous task. And I feel like when EPR started, everyone was very excited about California. And then, you know,

we had five, six other states pop up very quickly. And they're trying to figure out programs for it. The building of infrastructure is extremely important. We have to get more materials in the system. That is the biggest gap with recycling. False alarm. That's good to know. That's good. Positive. Yeah, we're going to keep that in the episode. You really get the experience of being here at NBC today. No, but we have to get materials into the system. And it can't fully be on the consumers, but EPR, how fees are set up, it's

going to help build that infrastructure out. And we've already seen it in a couple of places. I think one of the cool examples that's happening right now is in Oregon in the depot system that they're building out. place where consumers can go to and bring their materials it's a you know obviously the ease for the easiest route for consumers is curbside but it speaks volumes also to look at film and how clean store drop off film is comparatively if you were to go to a murph with film we've done bail analysis on murph

film residual film for murphs we've looked at bag based recycling systems and those bales so that's a We really only have a few in the States. The big one is New York, where New York residents can put all their recycling in bags, and then we're trying to recycle those bags. That material is really tough. There are virtually no end markets for it. It takes a ton of processing, a ton of washing. So promoting these unique and different types of drop -off scenarios, I think, is going to be a big key to the... to the system to get

more materials in there. I think you're going to end up seeing some innovation in the collection space that we don't have yet. I'm excited to see what comes. Yeah. That's the fun part about being on the ground floor of a lot of these discussions. And if you're not a part of these groups, you're probably not a part of the discussion. So that's another call out for why you should be involved in these kind of things. Yeah. And Kelly, we've talked a lot about film because film is very important. Everybody talks about film. They're all trying to figure out film. But Kelly and I just got back from a polypropylene study about

a week and a half ago. So polypro is one of these materials that is out there, but being a little underlooked right now. We need to focus on this number five stream to get it back into food packaging. We did a bail study with a project that Kelly and myself and a few other members have been developing since the beginning of this year. And there's a lot of fascinating results on. how well consumers are currently recycling polypropylene. Yeah, and how widespread polypropylene usage is. Yes. I mean, it really is a material that

is picking up on the side of use by brands and consumers, and it hasn't gotten some of the same infrastructure development yet. This is a very similar story to... My world with polystyrene is, that's what we're doing too, is we got to figure out how we collect more of it. Yeah. And we have to be creative because we're a very small piece. Like polypropylene's growing. We've been small and we're going to stay small. I don't see a world in which polystyrene then becomes

this huge behemoth of a polymer. So we've got to find different ways and creative ways to collect. So I think collecting is really important. But I also think participation in recycling is a big issue right now. So if you look at TRP's numbers, I think TRP says 43 or 47 percent of Americans are actively involved in the system. So when you start with that and then you have single stream, which is an inherently flawed

system, but that's what we got. We don't have the ability to put one. Polymer in one bin, another polymer in another bin, your film's over here. So we have to work with the system that we have. And people don't believe that it works. How do we change that? How do we change that narrative? How do we convince people that what you are doing and what I'm doing and what the rest of the industry is doing actually is happening? Because most people, specifically Gen Z, don't believe that

recycling works. How do you change that narrative? How do we tell them that? Recycling is real. Exactly. Well, I love what you guys do there. I just think that from my perspective, that messaging isn't getting through to the end consumer. That's going more towards C -suites and other people on LinkedIn. How do we get to the 20 -year -old in college right now? Well, and you know, that goes back to your comment about tackling real issues, right? Because recycling is real and there are pockets of excellence right now. But

it also comes back to the fact that we don't have infrastructure that's consistent. So the project that Andy was referencing, we're taking a more narrow regional approach and focusing on a state that actually has EPR. So because if you're going to start implementing a system to collect and sort and develop these streams, what can our committee and our group do? to help within markets because you need to have collection

and you need to have some place for it to go. And once you start to get more of those in place and you can point to, oh, this product went back into this product, I think it's going to take the hard work of that and having stories. Yeah, I think we are giving positive feedback to consumers, which is what we kind of came out of this bail trial with. And our project is being done in Colorado. Which is smart. Is it an EPR state? It's EPR. It's also very green friendly. You know, there's a lot of... It's a difficult recycling

state though. Absolutely. The distances. Yeah. You go one way, you hit mountains. You go the other way, you know, to a polypropylene recycler, there's six states in between the closest one, you know, going east, not west. But anyways, I think giving consumers positive feedback, which is what we'd like to do, because we saw a lot of positive things out of this bail, just saying, you know, you guys are doing a really good job of... focusing on these certain products, on dairy containers, on, you know, even cups, clear cups and clamshells and all of that. We found a lot of those materials in this bale study.

And we want to go back to them and basically be like, here's what you're doing right. Here's what we would love to help you on. And here's some more materials that we would like to, you know, basically train you to put into the bin. But the overall argument, I think, is just one of the worst ones in history for consumers to not recycle. when people say oh it just doesn't work so i'm not going to put anything in the bin from an environmentalist standpoint it's just a terrible approach because at the end of the day we're starving for material we need that material in the system and and for you to for

a consumer to to just go to landfill instead of putting it in the bin and you know it's it's just a really bad argument i see Yeah, it'd be really nice if we had like an iterative system. So maybe take the philosophy of the British cycling team from a few years ago, where it was like that 1 % incremental improvement and continuing to build on that. So as we have success, share those results and continue to drive towards better and better. And from a geographic standpoint,

you know, slowly grow your reach. And take learnings from one place and adopt it in others and one material and adopt it in others. And it goes back to that collaboration and the sharing of data that betters all of us. I guarantee you there's things that I, as a polystyrene advocate, can learn from what you figured out there. And the nice thing is our industry is not holding that information. We're not. There's no moat around it saying, hey, we spent this money. We're going to figure it out. And then nobody else

can know about it because we're going to have it as a trade secret. No, we're going to share. We share learnings. Like the amount of learnings that I've taken from other organizations to solve for my problems, it's really remarkable that these kind of organizations exist to work together. And I just absolutely love the collaboration across the supply chain. Yeah, nothing secret. Also for consumers, they can, you can go to Amer. Murphs are very open to a tour if you call them.

You do not have to be a part of industry. I always tell people that, you know, if you are really curious about how recycling works, call your local Murph, which is a recovery facility. Get in the door and have them show you the tipping floor and how everything gets sorted. It is so complex, and it may just look like a bulldozer picking up loads of trash and dumping it, but that end product into those bales is... You know, there's miles of conveyors and sorting equipment that is in between there that makes recycling real. So get out there and go see your local

Murph. I've been on a kick recently. I love making videos. It's one of my favorite things to do. I want to go to a drop -off site, watch all the stuff get dropped off there, watch that bale, then go to the Murph or whatever, wherever it goes, and then watch it go to a... If it goes through secondary sortation and then watch it go to the end producer so then we can see the finished product. I don't think I've seen that video anywhere. I think we need to do that, but

I don't have the money to do that. I think somebody in this industry needs to get together to do that and somebody that's better at filming than I am. But I think you can't prove to anybody that recycling exists and works by telling them about it. You have to show them. And exactly what you're talking about, the MRF tour is an excellent idea because most people assume, at least younger generations assume, that all of that material ends up just going to the same landfill. And like we spent all this time putting

it in this van, but then that truck comes and picks it up and takes it to the landfill, which we know is not right. But we have to show people that it's not right. Yeah. Yeah. I mean, another, I don't know who you're. audiences on your podcast and everything but another mostly people that hate plastics okay nice another really important day coming up in a couple weeks is manufacturing day yeah and i know i bet 98 of the country doesn't even know what manufacturing day is and that is a time where schools grade schools up to high schools can go into facilities and learn about

plastics they can learn about trades they can learn about plastic processing equipment manufacturing all these different things at my previous company we opened the door on manufacturing day and had five or six school buses come through just full of kids to learn about the industry. Yeah. So that's another great way. Yeah. It's not all secret. It's you can, if you ask, people will show you how things work. Yeah. Cause we're all passionate about what we do and we're passionate about the people that we work with. Like we talked before. So yeah, the, the whole reason why I

started this podcast was I think it was two years ago. I was in a meeting with some, somebody and they were just, bashing plastics and saying, we need to ban it. We get rid of it. I'm thinking to myself, it's like the eighth largest sector of the economy that you just want to get rid of overnight. And on top of that, I know a huge amount of the people that work here. And I'm sick of apologizing for the materials that we make, because the materials that we make are

phenomenal. We have our issues. Don't get me wrong. Every industry has our issues. has whatever issues they have. But we're committed to solving those issues one step at a time. That incremental change that you talk about, I think, is a huge way to look at it. Things have changed so much in the 20 years that I've been in the industry, and I feel hopeful. I really do. I mean, because we're making progress. And as all the influences and challenges make us think differently, We

are becoming aware of some of the ways that we can adapt and we can change and we can be better stewards of the resources we have. Going back to the people of the industry and how big of an impact it has on just North America alone, I mean, that was kind of the start of Recycling is Real, the initiative, and making videos. We were really focusing on the people of the plastics industry. And this is not, you know, C -suite folks. This is... operators, laborers, maintenance, all the crews that work in these facilities.

And if you check out our site and a bunch of the videos, there's one in particular, I forget the company, but there's like three generations of family that work there. I've seen all the videos. Yeah, and they have worked there forever. It's amazing. So, yeah, I mean, it's also some of these facilities are, you know, the life and blood of cities. You know, we were at a facility opening a couple years ago and the mayor of the town came in and it was... put in this old automotive plant. They restructured it and everything. Mayor came in and was just thrilled that it was bringing

jobs back to this area, bringing manufacturing specifically back. So yeah, it really does have a huge impact. And I think a lot of people don't realize how many jobs it brings to the U .S. So I was in Nashville middle of the year last year. Actually, I guess it was this year. My years meld together at some point. But the Polystyrene Recycling Alliance. put in foam recycling. Dense fires. Dense fires at the convenience centers in Nashville. And the mayor showed up and almost three quarters of the city council showed up

because they were so excited that they were going to be able to recycle foam. And then I got to meet all the different people that worked at those convenience centers. And then we went to where the facility was that was going to collect it all and then remake it back into new products. And the excitement in the area. for solving problems. And that's just one location. We can do that. We can extrapolate that with the right investment across the country. Same with films, same with polypropylene, same with PET thermoforms. I think

all thermoforms need some help and we're going to get there. And that's what we have to do. And once we start to solve it, then you can kind of see the ground swell in these areas where they get really excited about it. yeah we're going to do this again and we're going to do it here and we're going to do it there because we have to because we want to be good stewards yeah that's what we're trying to do with this polypropylene program and our association we're trying to create a base model for other states to be able to turn the tap on for polypropylene yeah you know it is being collected and recycled

in in a number of states but we want those states who are questioning it we want to talk with the murphs who maybe aren't comfortable with the potential volume of material, the economics of it. We want to show them, hey, this can work. You will have end markets. Your volumes are increasing. Turn that tap on for Polybro. Yeah. The end markets are huge. Companies like Anchor coming to the table and saying, hey, you collect it, I'll buy it. I think every polymer within the plastics

industry has the same issues. If you can get me a material, I will buy it. It's just, You got to get me the material. And so that's the part we're solving for, the infrastructure gaps and the knowledge gaps and the trust gap. I think those are the three things that we really have to solve for. But if we do that, we've got enough people that want to buy it and need to in many cases. Because one good thing about certain EPR is we are incentivizing using recycled content

in some states. And I think that's a good part. I love that. We need more of that. We need less rates and dates and more, hey, if you use recycled content, you get some kind of bonus rather than a malice within EPR systems. So I absolutely love it. I love what you guys are doing. So we are right at time, but I do want to give either of you. Last comments, anything you want to add, anything you want to talk about? Yeah, I would say anybody that would like to be part of the work that Andy's doing and, you know, that we're doing in Colorado, specifically on the polypropylene

side, reach out because it's not a closed club. It's absolutely something that folks can get involved in. I agree with that. We love all the help from our members. I couldn't do a lot of the things that I do without Kelly and others on my, you know, by my side through these programs. They really bring the expertise for us, and it's just a huge benefit to have them be part of our association. Yeah. So, yeah, it's exciting times. There's a lot happening. We could plug NPE for next year. NPE's coming up in 2027. Always a

good thing to talk about. Which is the National Plastics Expo. That is a humongous event, a humongous trade show for the plastics industry. That's coming up next year in Orlando. Wear comfortable shoes. Wear comfortable shoes. It's a lot of walking. It is. Yes. Every day. So many attendees, too. And the industry is really getting jazzed up about it. I'll end by saying that I really appreciate the platform that Plastics has provided this show here today. Yeah. But then just these conversations. I think these conversations are

more important than anybody's podcast show or whatever. I think learning from each other while we're here. has been more beneficial than any kind of marketing I could get for this show. But I do appreciate all of that. So for the Redefining Plastics podcast and for the guests, my name is Justin Riney. Thank you all so much. If you want to learn more about the plastics industry, recycling, check out these other videos. Please like and subscribe.

Open the transcript file

Hosts and Guests

Nobody is credited on this episode yet.

Credit the people on this episode

Be the first to rate this episode

More episodes

All episodes
  1. Scaling Dissolution for Food-Contact Recycled Polypropylene with IPL Schoeller and PureCycle

    Nov 3, 202629 minAudio

    At NPC Live, Redefining Plastics host Justin Riney sat down with Melissa Vettleson (Sustainability and Materials Engineer at IPL Schoeller) and Christian Bruey (Director of Sustainability and External Affairs at...

    Credit the people on this episode

  2. Are Plastics Sustainable? with Patrick Krieger of the PLASTICS Industry Association

    Oct 27, 202632 minAudio

    Justin Riney hosts Patrick Krieger, who is the Senior Vice President of Sustainability and Policy at the PLASTICS Industry Association. In this conversation, they dive deep into sustainability, plastics, and creating...

    Credit the people on this episode

  3. NAPCOR’s PET Bottle Decarbonization Roadmap with Husky’s Jolene Milne (NPC Live)

    Oct 6, 202624 minAudio

    At NPC Live, Redefining Plastics host Justin Riney speaks with Jolene Milne, a sustainability analyst at Husky Technologies and member of NAPCOR, about industry collaboration to combat misinformation about plastics and...

    Credit the people on this episode

  4. EPR, Data Gaps, and Change Management with Christine Yeager at National Plastics Conference Live

    Sep 23, 202632 minAudio

    We had a blast with this interview at the National Plastics Conference on-site podcast studio, "National Plastics Conference Live." Christine Yeager of CSY Impact dove deep into extended producer responsibility (EPR),...

    Credit the people on this episode

  5. Update on Redefining Plastics, NPC, and PSRA

    Sep 10, 202612 minAudio

    This is a short one today, but I wanted to give the audience an update on Redefining Plastics, my participation in the National Plastics Conference, and the Polystyrene Recycling Alliance. You may have noticed that I...

    Credit the people on this episode