Skip to content
PodSubs
ShowsPeopleGuestsJobsNewsEvents
More
BlogPodCred
Menu
ShowsPeopleGuestsJobsNewsEventsBlogPodCredNetworksSign in
Join nowSign in
  • Shows
  • People
  • Jobs
  • News
  • More
    • Guests
    • Events
    • Blog
    • PodCred
    • Networks
    Join nowSign in

Energy Bytes

Energy Bytes artwork

EP 45: Automating Oil Rigs: Robots vs. Roughnecks

Aug 15, 20241 hr 8 minAudio
ShareXLinkedInFacebookWhatsAppEmail

Andrew Richard, President and Co-Founder of Automated Rig Technologies, and Ronald Townsend, President of Automated Completions Technologies Inc., discuss how automation is transforming the oilfield industry. They explore how new technologies are revolutionizing well servicing and completions, enhancing safety and efficiency, and reducing human error. The conversation highlights the shift from outdated practices to innovative solutions like the CD Rod Tong, which are making the industry more efficient and creating better work environments. Both Andrew and Ronald share their expertise on the role of AI and automation in shaping the future of the oil and gas sector. Join the conversation shaping the future of energy. Collide is the community where oil & gas professionals connect, share insights, and solve real-world problems together. No noise. No fluff. Just the discussions that move our industry forward. Apply today at collide.io Click here to view the episode transcript. 00:00 - Intro 01:16 - Kroger Dynamic Pricing Test 02:14 - Overview of Automated Rig Technologies 04:34 - Workover Rigs Evolution 09:51 - Securing R&D Funding from Operators 20:10 - Introduction to Rival Downhole 20:25 - Rival Downhole Technologies Explained 21:20 - Joint Pipe Injector (JPI) Market Fit 23:55 - Automation's Impact on Job Creation 28:05 - Joint Pipe Injector (JPI) Background 32:00 - Data Insights from JPI 34:00 - CD Tong Discussion 39:30 - Tech and Operator Friction 42:46 - Importance of Data in Operations 44:29 - Positive Feedback in Technology 46:20 - Reducing Operator Input by 97% 48:48 - Automation on Well Sites 52:30 - SCADA and IoT Integration 56:26 - Role of Software Companies 59:30 - NFTs in Wellbore Management 1:03:26 - Replacing Roughneck Roles 1:05:28 - War Story: Bonnet Bolts Issue 1:07:10 - Finding Automated Rig Technologies https://twitter.com/collide_ai https://www.tiktok.com/@collide.io https://www.facebook.com/collide.io https://www.instagram.com/collide.io https://www.youtube.com/@collide_io https://www.linkedin.com/company/collideai

Audio and video play straight from the show's own hosting. PodSubs stores and serves no media.

Transcript

From the show.

All right, everybody. We are back. Sorry we've been kind of spotty over the summer. School is back today, as you can tell by my my shirt. First day of school for the kids today. So, uh hopefully our schedule will be getting back to a little bit more normal. But today we're here with uh Andrew, is it Rishard or Rishard? Okay, absolutely. Um Andrew Rishard, president and co-founder of Automated Rig Technologies up in Canada. Appreciate you being here. And we're also here today with Ron Townson, the president of the US entity um which is called Automated Completion Technologies. Thanks for uh for coming in today, guys. Thank you. Yeah, thanks a lot for having us, John. Yeah, man. I'm I'm excited to have you guys just because of kind of the the background that uh I've had. Um and Bob, as everyone can tell, Bobby's not here. He's got a meeting today. So he's uh he's going through all the fun of uh the the merger and acquisition with the the the Devon stuff today. But [snorts] um when Bobby and I worked together, we did a lot of work on the kind of field hardware edge side of things. And so I think it'll be an interesting instrumentation and that sort of thing. It'll be interesting conversation. Um, anyway, but [snorts] today's story, as I kind of preface you guys on, is uh I I normally go on Perplexity once or twice a week and just click on discover and scroll through their news stories to see what what was on there. And one of them was uh Kroger is is testing dynamic uh pricing online. And in the the article, the reason I even bring this story up is because they they had an acronym called enhanced display for grocery environment, and then they put edge out to the side of it. And I thought that was a nice little nod to uh the edge computing and stuff. But they're looking at, you know, dynamic pricing. They're looking at putting cameras and stuff at the at the checkout and throughout the store, I guess, um that can, you know, do age and gender recognition. They're just trying to collect as much data on people as possible at the edge. And so I think thought that would be an interesting story for for what to kind of transition with you guys because you guys do a ton of hardware uh enablement and automation essentially at the edge, right? So that's So with that, let's let's kind of get into what you guys do just a little bit. Um so that we can and we can kind of tie this back in. But what is what is automated rig and automated completion technologies? Uh what do you guys do? Uh we do a wide breadth of of of solutions or we offer a wide breadth of solutions to the industry. Uh but where we've been narrowing down over the last year or two uh really is commercializing technologies after the drill bit leaves. Our history is a lot of drilling type type work. Um but now we're we're we're getting involved heavily uh and bringing automation and optimization to the uh well completions and the well service and the PNA side with some new technologies that we've got which is like in my opinion at least the well servicing workover side is just so ripe for disruption right it's it's uh I mean we've got automated drilling rigs we're working on trying to automate frack and then it's like oh oh yeah we still have this well that we have to service or we have to drill out. We we still do it with a work of a rig in 1950 technology. Exactly. And it's all, you know, still got analog gauges. Half of them still have analog instrumentation. But then it's like, you know, we were when I was at when Bobby and I worked together at RDS, one of the things that one of our customers had brought to us and was like, "Hey, you know, we spend all this money doing drill outs and it's, you know, we tend to go for the in their basin, wherever it was, you know, workovers was cheaper than than coil." And so they were using workovers [snorts] and they were like but if we get stuck we have no way of knowing who was the cause or what caused it. He I was like are you like there's no instrumentation? No it's all digital and they just write it on a you know piece of paper and that's the log basically. And I'm like that's wild. So we started working on some just monitoring stuff right pressures rates um forces and torque and all that fun stuff. But it's one of those things where it's like why hasn't someone done this because we have the components of it all exist generally speaking in some instances at least on the monitoring the sensor side of being able to monitor this stuff but [snorts] and they exist in the drilling and completion side but no one has brought it there. So I'm really excited to kind of unpack what you guys have done. [snorts] There's a I've got a lot of thoughts about yeah lot of thoughts. Let's get into kind of like the evolution of it. Right. Like so you mentioned right work rigs around in the 50s generally speaking I mean they're not to make it sound overly simple but they're not like the most it's not the craziest thing that you're doing in the oil field by any means right you're you're doing a lot of repetitive stuff essentially but there hasn't been any real change in it at least to my knowledge in decades. Yes. and and you know even a snubbing in the snubbing space it's even goes back further than that. I mean it's World War II technology. That's how old this stuff is. It's just four cylinders and that's about it. And so uh we saw this coming uh and we've kind of been trying to get some buy in operate and and you know service companies they're low budget no money no capex uh yeah we're the stepchild of the uh travel industry [laughter] but we're seeing the change uh at the operator's table now uh basically that's why we're here in Houston this week. Uh they've asked us to come talk to them and explain to them what what we're doing. And you know, they're talking ergonomics of the of the operator. Why why do we have a driller in a cyber chair yet the operator on the workover rig standing out in the 105 degree weather under an umbrella? Under umbrella. At least he's got an umbrella, you know. Yeah. And so that's that's the that's the how far apart we are. But you know they see now at least a couple of guys see that you know that's not it's not right and nobody wants to do that work right. [laughter] And so it's taken it's taken the fact that we're running out of people Yeah. to do the work the physical work because history says they just throw more people at it. Right. you know, we're not we don't need a machine. We don't need to think. We just send more dumb rough necks out there and they'll get the job done. And so, and that's and I'm not I'm not talking about little operator major operators have had that mentality. Yeah. Today, but we're seeing that we're seeing that transition. Uh met yesterday. met and they, you know, they're talking, we need to get the operator in the cyber chair. We need to get the dairy can out of the dairy, right? They're mashing fingers. They're they're twisting arms still. That's the I think that's the weird dichotomy, right, with technology in the oil field is that one technology a enables a lot more safety. It enables a lot more accuracy, a lot a lot of a lot more control. But the flip side of that is then it's like okay well is it you also don't want to displace the the people that are doing that work because most of them are you know just good people trying to make a living and so it but at the same time it's like I think that's a normally that's a much longer time period where you go from like a new technology to completely replacing people in the field right a lot of people jump to that conclusion but most of these things are very step change and or like incremental over time and it's one of those things where it's like it's replacing the person. It's just allowing them to do what they're good at and not these mundane un or very unsafe kind of things that cause all these issues. Right. And so I I love technology as an enablement of the safety element specifically in the oil field because it is I mean people I was walking around 15 you know 15,000k iron in the Hanesville not thinking twice about the fact that oh we're pumping 12,000 PSI and pal leak on any of this iron and it's cutting everything in front of it in half including you. Yeah. Exactly. And so it's it's it's such a weird thing because everything seems so normalized when you're in the field, but then you step back and you're like, "Oh [ __ ] that was that was really sketchy at one point." You know, and the workforce, you know, the thing we another thing we've got coming at us is the workforce is changing. Yep. Right. Uh you know, most of my generation, we had farm, we had a farm connection somewhere and you know, work bail hay in the summer for a penny of bail or whatever it was. And we don't have that anymore. Yeah. Uh the young folks and good for them. Uh you know, they're they're they're they're on their games, you know, and so we've got to go to them. Yeah. We've got to we've got to make an appealing place to work. Come make a good living in the oil field, but they're not going to do the work we did. And they shouldn't have to. Yeah. But we've been waiting, the industry's been waiting on the on the operators to get there and they're getting there. Yeah. I think that's we're going to see a change with anything. It always has to ultimately come down from the operator, right? Like you can have the coolest new tech on the service side, but if the operator doesn't see the the value that [clears throat] you're trying to convey in it, it's not going to Yeah. And even [snorts] internally uh inside the operator we're seeing a discussion about how do we get this done from a financial standpoint because you know corporate has a operating budget and we need to stay within an operating budget but all this R&D takes time it takes money and the operating budget guys that are controlling they say I'm not paying for that. Yeah. Corporate if you got it's always no lower prices, not higher prices. Yeah. So, if corporate, if we're going to do this, you got to get up off some of that R&D money and give us some R&D money cuz we're not, you know, we got our budget set because what you start doing is taking wells away if we start monkeying around trying to get new technology implemented. And so they're even it's not a struggle, but it's a it's a discussion around how do we pay for this? No, for sure. And not penalize the field guys. Yeah. No, that's uh there's there's a few companies and I'll throw them out there like EQT, Devon. There's companies like that that exist that have in my opinion done it very well. um where they have a separate entity with a separate budget that is focused specifically on introducing and testing new technologies. And I bring this up because I genuinely think and I'll look at the camera, operators that aren't doing it this way are hurting the industry and you're hurting yourselves in all honesty. Because if I'm a complet engineer and my my annual bonuses are tied to coming in under budget and the number of wells I complete, I am not going to remotely entertain trying something that will either increase my budget or slow that down. And so those incentives aren't aligned. And this is, you know, I see this I've seen this throughout the years even just across departments, right? Like the completion engineer is focused on budget and the number of wells, right? He's it's all AF and number of wells. Well, then the reservoir engineer over the exact same field is focused on the production and the reserves and the recovery and it's he wants to do some tests to figure out what that's going to look like, but that's going to cost money and time. And so now their incentives aren't aligned. So how are you supposed to optimize your assets if you have people that are working on the same asset that aren't aligned in the same direction? And so I agree with you though. it it has to come from the operator because the service guys and I'm I'll go on a rant because I've worked in the service industry my most of my career but like the service industry is again the stepchild of the oil field and we get blamed for everything and it's like okay well if you know if uh if prices are too low then we have to cut our prices and then then half the indust half of the service companies go bankrupt then prices go back up then they [ __ ] about pricing going back up but then when it goes back up all that's left is the majors that you were mad about having high prices to begin with and you just go through this cycle all over again. And it's there's got to be a better way to do that. And hopefully these relationships keep building where it's more collaborative and not so like just strictly supply chain. Here's the RFP. Don't talk to anybody and then we'll just get the bid and we'll go with the lowest price, right? Like Yeah. Another thing uh that we're hearing the drums are beating on uh which is a huge huge step change. They're talking about term contracts for their service rigs. Absolutely. Yeah. That's not call out basis year first call your all this noise which means nothing but they're talking about a you know three to five year commitment and so that changes the whole dynamics as well. If you're if you have a long-term relationship and it's papered y then you can afford to pay a little more maybe or you can afford to take a little risk on change. That's the thing. It's just I mean ju even just like on the service side just the the cash flowility. Right. Yeah. And especially when you're not a a required service per se where you're on a callout basis. I experienced that firsthand at RDS because we were doing gauges, right? So it's not like every company doesn't need a gauge on every well, right? And in in most cases, they're only doing gauges on tests or wells that they're testing specifically. So it's a very like you don't really know. It's very hard to forecast from a sales perspective when you're doing that kind of stuff. But if you can implement more of a term where it's like an annual or multi-year thing, then that brings stability to the service company. So guess what? They can hire. They can provide better service. They can do R&D. you and that's the the crazy part that I mean there are so many services still that are just pure call out based off you know who the company man even is right absolutely 100% and and and just sort of to take one step back from what what Ron's explaining what's the conversation is happening now is and what we've seen is because of the dynamics in the industry and because of the incentives that you're talking about etc it seems to be that the the service companies on the well servicing side or work over side have have implemented very minor changes and they're doing very small step changes to get to what they what they believe might what they perceive yeah as is as as being a solution but the reality that that ends up becoming very apparent is that there's always these unintended consequences of of automation. So you you look at you look at a workover rig or a service rig today or a stubbing jack and you look at what a person does on that. And so people will tend to go, "Oh, we swing the tong in." Well, let's bring a tong in. Well, who's going to dope the pipe? Who's going to kick the pipe? Who's going to pull [laughter] it up? So there's there's then then you start running this all these these back and that is not necessarily the best way to approach it. Our but we were talking about this last night. Our VP of engineering, Harold Miller, is also our COO, has a perfect analogy for this. It's It's like you and I are sitting we're we're dishwashers at a restaurant. So, we're in line and I grab a dish and I scrub that dish and I hand it to you and you rinse the dish and then you put it in the drying rack. Or you invent a dishwasher, you put everything in the dishwasher and you run a from a blank piece of paper. A whole different process. And the way that it sort of seems the the market is is is going down this path is they're going to the dollar store and they're buying a a a handle that has the soap in it with this and they're and they're washing the dish cuz that's the next step of automation. Instead, we need to go to the dishwasher. So, we start with this start with a different way of an evolutionary thing. and say if I could do this today with today's technology knowing what I know where would I how would I do this trying to remove any of the the history and and my my argument always in my head is that like there's a ton of software companies out there and there's a ton of optimization softwares and we're trying to a lot of the times it seems like we're trying to bridge the gap right over to well servicing or workover without actually looking at the equipment so I don't believe that the equipment that exists in the market today is primed for automation. Yeah. Now you look at the drilling side and the drilling side uh we were talking to uh I was talking to Taenerys a couple of months ago and I haven't fact checked this so someone else on the internet can but they the statement that came from one of their guys was that in 2023 and then also again in 2024 they were expecting to deliver the same amount of casing to the US that they did in 2014. But in 2014, we had 2100 rigs running. And now we have 700 rigs running. And what was the guy the other day told us that that an average rig now is expected to be drilling 26 wells a year. Wow. So if that's the case, that's crazy. You still have the same number of people on the rig, but the rig itself has become so efficient that you can do one oneird of the equipment with with with with the same amount of output. No, I think another really good analogy for this is looking at all the AI stuff, right? Like people growing up the Jetsons, like everybody thought, you know, AI would or what we think AI, what we thought of or were told AI would be was, oh, well, we'll have, you know, I'll have a a a housekeeper that does all the dishes and cleans the house and does the laundry. And it's like no the first like the creative stuff is ironically what AI has started supplanting essentially whereas all the bluecollar stuff it is like just the hands-on stuff it is so much harder to automate like a lot of human movement that it really doesn't make sense to like and so people again people solve for the wrong problem right they're looking how do I improve a minor you know a 2% thing like putting the soap in the handle right versus how do I just redesign this whole process Yeah. From the sc from zero. And that's kind of where we're at today. We're being challenged to get the blank sheet of paper out. And so that's kind of going to be hard. Yeah. And the next problem you run into, you know, you got all this equipment. [snorts] Yep. That's 1950 technology that they just bought last week, right? and they got in gusters and they tell they've been telling the same lie for for 50 years and so you just don't go displace that stuff. They're not going to throw that in the trash can and start with a new machine. It's going to take some time that the evolution. Uh so we're almost better with startup company who doesn't have any equipment, right? and and going going fresh with somebody like that, but then you don't have the you don't have the management team in place and you don't have this, you don't have the track record and the you know MSAs with the majors and so it's quite an equation to get all that rolled up into one into one basket. No, for sure. Let's uh let's get into exactly kind of some of the stuff you guys do on a on the well servicing and completion side. Like what are y'all automating? What are we what are we what are we going from on the from? Yeah. Um there's three technologies that we've got right now that are sort of leading our sales efforts or revenue. Um we've got a lot of existing history and equipment and solutions-based stuff but that's tends to be very specific with uh people that approach us uh about particular challenges. Uh the three technologies are um a CD rod tong um and and that's a circumferential displacement tong. So it's correctly makes up sucker rods, but it has a data acquisition system. You run it like a casing running service, right? Um then there's then there's the other two are both jointed pipe injectors of sorts. One's the larger unit, one's a smaller PCI. Checking these out on the website before you'all got here. So, it's I find that when we talk to um uh a lot of people in the industry, it's it's a it always feels like a Steve Jobs conversation where it's and one more thing because the technology is this lynchpin technology that fits into existing equipment that already exists in the market uh but it enables so much more. Right? So you think about a coil tubing unit uh injector but this injector can inject stick pipe. So just from the the surface concept there you can go with larger diameter tubing. You can go with lower cost tubing. You don't have to worry about the the the cycle life of of of the coil. Uh you don't have to worry about nitrogen per all the other organic chemical problems that you've got. But you can rotate. So you start thinking about or we start thinking about these wells that are 30 32,000 ft and coils having a tremendous issue getting there. How did the rig doesn't have a problem getting there, right? The rig probably can go quite a bit further if the drone if we wanted it to. Um but a lot of the stuff you're limited by the completion and the tools. So [clears throat] the the injector enables that portion of uh the jointer pipe injector and the production tubing injector which is a much smaller machine uh from a capacity standpoint, not necessarily physically, right? Um and and what that does is it transitions the the the the hoisting capacity from above your head to below your feet. And as you start getting your head wrapped around that idea, what that can do then is because we've got coupling sensors on the top and bottom of the machine, we can now locate where the coupling is on the floor. So now we can bring the stump. We don't have to worry about moving the tong. The tong can just be at the position. You can bring the coupling to the tong. Um, interesting. Everything becomes very fixed. Right. Right. are are

there's so much enabled from this from this technology. You know, things like and and the one more things are are like um we don't have an injector in the market right now that I'm aware of that opens to seven and a 16th or to the bop through bore. Let's just say we have designs for much larger than seven and a 16th. Um so, so the injectors there as the as the main tool. Um on that. Yeah. Another thing, you take people out of the red zone, right? You start moving this guy out, then you start moving that guy. So, the PTI, uh, there's usually three in a space in what is it? 5 by six. Pretty small. [laughter] And then you got the big elevators in there. So, we've removed basically remove the elevators, remove the slips from the load path. We've taken one guy out already and we're working on getting a second out. The operator's remote. We can actually put that guy in air conditioned cabin like a coil cabin. Y you know, so so you start this kind of process and if you set it up right in the beginning, you can end up in a very nice place, right? You know, people in the AC, people in the heat outside of the red zone. Outside of the red zone. uh you got a couple of guys running around down low chasing pipe and loading pipe but outside and so then you just continue to let it grow and and and it'll get to where it needs to get to. Yeah. It's about about elevating the roles cuz like like you you like the comment you you made earlier about the the perception in the industry is that oh we're going to automate this and we're going to remove people. I don't believe that's that really is really what happens, right? You you you may not need a person that's sitting there hitting a hammer all day long, but now that person can do preventative maintenance and repair or they can focus on more a higher level stuff. And there's a great there's a great thing a TED talk I can't remember who who does it, but it's about automation and it kind of goes into the original automatic tellers at the banks. Everyone thought that right, oh there's going to be no more banks. And what ended up happening was the ATMs ended up taking all of the mundane, boring stuff away and the banks made more money and they opened up more rightes and loans and mortgages and and and so I'm a little bit more of an optimist around this this stuff. I think that I do think that certain roles will go away, but that opens up room for additional roles in in the in the space. And you turn that, you know, this is a poor analogy, but you turn that operator's position into a gaming position. They've got the world's best computer. They've got all the controls and and the and the workforce today can go in there and they can do that. Yep. And they can do it very effective, very efficiently. And so let's use what we got because that's what we have as a workforce. So we're, you know, we're trying to get things moved towards towards towards the workforce. Yeah. That we have because otherwise we're going to be done. Yeah. No, I agree with you wholeheartedly. I think, you know, on one hand, you have the industry bitching about, why doesn't anyone want to come work here? And it's like, have you worked on a workover rig? It sucks. Like, why would I why would I want to come work here? And then if you get six months of workover experience, guess where you're going? when you're going to the drilling rigs cuz they're a whole lot better to work on and they got a lot more things picking up swinging and you know you don't instability uh if you can get and so you're going to move up that ladder you going to move up the given ladder that you have to climb up. Yep. And so we've got to do something to make this low I'll call it the lower end of the of the industry. Uh we got to make that appealing to the workers. Yeah. Yeah. Yeah. No, I mean it makes so much sense, right? Like meet meet people where they're at instead of forcing them into using 70-y old technology. Yeah. Well, it's not going to happen. And like like like you talked about before, I mean, this the the story I've been told is that, you know, in you you get these big sexy budgets in the drilling side and you get these budgets in the in the frack and the completion side and then you you're a production engineer and they're like, "Go stay in the corner. Don't spend any money. Pump all the oil out of the well." Right. And and so so it just spend less money. Yeah. Right. It's costing you too much. Yeah. Drive those prices down as much as possible. So like the I I guess the other part about the injector that might might be interesting to point out is um maybe a little bit about about the background cuz we we went into this [snorts] not thinking about this niche at all. We went into it because we had completed an offshore continuous tripping machine design for a company down here in Houston. And Harold, our VP of engineering, he um wanted to figure out a way to apply that to landbased world cuz again our background is a lot of drilling. And so we started introducing that to to many people. And then Ron and and Dave uh from our company were doing a lot of market research. And as they presented this to the operators on continuous tripping for drilling, they operators were like, "Hey, wait, if this can pull and this can push, this can complete and this can replace coil and this can replace snubbing and this." So, so, so then we started focusing in heavily on the completion side and obviously the not obviously but the the rates or the the day rates for that part of the industry are there like they can they could absorb the the the the development of this kind of technology or application. Um but what we've seen over the last year or two is that the push has been actually much further down our development roadmap which is the well servicing side. Yeah. Right. About removing those those people and and and whatnot. So we're working on that with an operator right now in in the Bacan and there will be uh the first field deployment of the big unit uh fully hands-free workflow all the all the things. That's awesome. Yeah. later this sometime like in the next few months here it'll be are these are these um augmenting existing rigs or is this a new platform? So the the first deployment will have a rig an existing rig beside it. Um mainly because of some of the pipe handling stuff that we've dealt with to we've already got structure and componentry that that exists for that. Um but there there is a phased approach and the and the and the later phases is a completely new platform that that doesn't exist wrapped around the injector wrapped around the JPI and and and we we we went down a variety of different paths with this and like from a you know from a specmanship perspective and I I don't uh profess to know the exact history of where the snubbing jack came from uh with a 300,000 BB hook load like the the 285s and stuff in the Northeast. Uh but it seems like a lot of specmanship based on what exists already. So you got a 300,000lb workover rig that's doing these completions. Now you need you need the jack doing that, you know, and maybe that's the right size, maybe it's not. But um what what we did was we went down the path of actually developing an injector that was 300,000 lb hook load and 170,000 lb of push. But we still question whether or not that's actually a product that will go to market because it may offshore. It may may be needed offshore. But we think that that we believe that you use the right tool for the right job. Yeah. So, there might be an optimization where the injectors that go out to the field are really 150,000 lb hoisting capacity, 75,000 uh snub. Uh, [snorts] but then they're they're they have a a new design up above them that isn't what we've got in the market today, but still has the capacity to bring that system to 300,000 lb if needed. I was going to say it's a lot easier to go [clears throat] down in load than it is to try and design up, right? Yeah. [laughter] Yeah. Yeah, for sure. So what what kind of you know on the when whenever I hear automation I always think that okay so now we've digitized typically something that was not digitized before what kind of instrumentation and stuff does this bring and kind of to your point those and also yeah things that come from that well it's simple it brings the same technology that the AC drilling rigs are operating today same basic package yeah so what kind specs am I able to like what kind of information and I'm I'm a data guy so let's nerd out on data for let's get like a little bit of the value proposition which kind of explains it helps explain what you're asking there's there's I would I would tend to agree that automation tends to have some digital component to it um if you look at the the the market today this is just what I see from you know you had workover rigs and you had rig assist snubbing jacks and then we went to coil heavy and then coil wasn't able. So now we're going backwards in the industry. So we're going back to equipment that doesn't have any may have data acquisition systems. We've done some snubbing data acquisition systems. I was going to say um on snubbing units works are [clears throat] very lacking. Yeah. And then workovers. Yeah, you're right. Both however both being very manual operations when you compare the injector just from a pure mechanical perspective to to to what snubbing does there's a reduction of around 97% of operator input. Wow. So huge amount of automation removed. So, we're talking and I I tend to default to speed and I get called out online because people are like, "Oh, BS and all this, but but it's it's it's not that that we're moving into the well any faster than a typical jack. We're just not going backwards half the time, right? So, instead of doing right, you're not dripping and we're going one direction for the whole length of the joint. So, we're running the joint in in 14 seconds or less, right?" Um, and then there's the connection time, but right there's there's automation that happens after say some I'm very interested in some of that because essentially what you guys have is injection for sucker rods all the way up to tubing. Is that So there's Yeah. So So there's this is what I took from some of the stuff on the site and I very briefly looked at it. Maybe I so um we what we have we we do have another product line uh that's around and we we purchased that to add to the company in 2015 when everything started to crater to kind of diversify outside of just the drilling side and that was um uh continuous rod running equipment. So, similar to coil tubing, um it's it's however there is there are some differences, right? Coiled tubing you yield onto the reel. Um coiled rod you cannot yield. So, the reels are really really large. That's you'll sometimes see them running on an angle down the road uh on these very large reels. Uh but but you're right, that does provide a tremendous amount of automation to a work to a to a service. been out on a well where they're pulling rods and I'm like, man, this looks like this sucks. [laughter] Yeah. And and so that that that's a good segue actually into sort of the CD tong and the safety and the automation, not automation, but the safety part that comes in with that. So, um the continuous rod running equipment tends to be uh in in heavy oil applications and and whatnot. Now, there's a bunch going on down here right now, but if you're you do have some logistics challenges cuz you have a certain capacity on a reel and a certain capacity on a trailer similar to coil where [clears throat] you got to Yeah. So, but but that does lead to automation from running every single connection. Yeah. You know, it it removes personnel from the workflow for sure. There are other benefits. uh when you're running continuous sucker rod, you [clears throat] don't have connections that are that are that are um not only prone to fa let's say prone to failure but um but limiting the the flow and and then you're you're you're point loading on the tubing. And so there's there's inherent benefits in continuous rod. But what we've done and actually out of the automation of the of of the workover rigs work that we've done, we patented uh something called a circumferential displacement tong. Um, it's I don't think anyone in our business ever wanted to know as much as we know about sucker rods, [laughter] but we've bored so to learn all this stuff. Um, we were surprised because because again we're from the drilling side and we understand that many many connections in the rigs are are are torque based, right? Um, but every single sucker rod manufacturer requires circumferential displacement, which if you've been on there, you got a little card and two lines, and you're supposed to card every whatever the maybe the first couple and then every 10th connection. And then there's these thoughts where you um adjust the the hydraulic relief valve on the tong for every 5 degrees of temperature increase on the hydraulic oil. And because it all affects it all affects to where they think CD is going to be. And so what we developed was I find it hard to believe that every work overhand is doing that on [snorts] any of these. It's not happening. But it's in the procedure. I'm sure not. I I I agree. [laughter] So So we developed So cuz because an existing sucker rod tong has a large displacement hydraulic motor that estimates circumferential displacement based on speed and torque. Okay. And you know we I remember sitting in the mechanical engineers office at the time Andrew Banister. were bsing about. We'd always talked about a rack and pinion getting involved in a in a in a connection whether it was on a rig or whatever. And we were talking about all this for for a long time and it ended up coming to fruition with this product. So basically what we did was we split it into two um two actuators. So we've got a high high speeded low torque motor that stalls at shoulder and then we move to a mechanical dis displacement. So we can just go to CD every single time. And so to Ron's point in a meeting we were having yesterday is is that by reducing or increasing the meanantime between failures or reducing the overall failures related to connections [clears throat] you you increase safety because you're it's you're lowering your frequency right and and along with that platform just well intervention like no one wants well intervention especially the production engineers we're talking about right like that's their worst nightmare I mean it's money right those rods are going up down they're putting money in that's the so Before I got in the oil field, my I had two years I I interned for a manufacturing company. Ironically enough, they were we were manufacturing wind turbines. But during that process, I learned all about lean manufacturing and 5S and six sigma and all these things. And then I [laughter] get out into the oil field, I'm like, boy, is there a lot of opportunity there. Because it's it's true, though. It's like we look at all these things and people I mean I I sold $350 day rentals to completion guys who would push back on the pricing on them and it's like what are y'all doing? or like how how messed up is our thought process in this industry at times where it's like they're so worried about the big stuff but compounding little things that shut down production or shut down the frack or shut down the drilling rig have just as [clears throat] much impact [laughter] than you spending another $100 a day on something else or whatever it may be. But that's where it's like that's where this friction of technology and like the operators start coming in where it's like hey we can provide you real-time streaming of all of this data so that you can be aware of it and we can be safer but it's going to cost money because it costs us money. Oh well we don't want you know and they also don't want big brother on location and that's another fear you have to overcome with all this data. Yep. And so data is great but you can't use it to hit somebody over the head with it. Well, that's the thing. It should be used for improvement. Growth and improvement. You can't you can't uh improve what you're not monitoring. There was a system out there by one well servicing company uh every rig had one, we think, but uh switch never got turned on. Never. Yeah. Because they didn't want big brother watching them make up connections wrong. Right. And they didn't care. And so this CD tongue, you know, we got data. We can see every connection. We can see the pressure. We can see the torque. We can see the CD. We can see it all. When what a what a novel concept to just let it automatically do it right every time instead of putting the responsibility on the guy who's been working for two months straight, you know, like or two who just got here, right? And you're running the tongs today cuz there's nobody else here [laughter] to do it. Yeah. Cuz Bubba didn't show up. Bubba didn't show up. And so now we we're, you know, we're we're telling the guys, you need to run this like a casing running service. You got a guy, a truck, and our unit hydraulic hydraulic power pack through the tongs, and he's casing running. Yeah. And and he's in charge of making up the the the sucker rods and he's in charge of getting the report to the desk of the engineer who needs to look at it. Right. Then when there's a failure, we can go back and we can say, "hm, that joint failed, why?" And the next thing when we pull them out, we're breaking them. We can see the pressure from previous jobs. We can tell if they're torqued properly, if they're over torqued, they're under torque. We can give you all that data. We got a company that we're working very closely with in North Dakota. They say we were going to this particular set of wells every 90 days for rod failure. Said we hadn't been there in two and a half years. Wow. [laughter] Yeah. Yeah. That's that's exactly my point, right? Is it's like if you focus on the little stuff that compounds upward because like that's the scale of the oil field I think is hard for a lot of people to understand too is it's like you have thousands of wells if you're a major operator. So having rod failures every 90 days versus every two years on thousands of wells is a probably millions of dollars a year. And so it's just like people overlook I feel like those small optimizations because they're looking at they're trying to find the big thing, right? But it's like compounding improvements especially around risk and safety like long-term liabil or reliability. So, I don't know if we want to talk numbers, but you can edit this out if you so choose, but it's $140,000 full package. Mhm. So, for $140,000, you can you can make millions. Yeah. Well, and and and and for that number, it's not just the tong, it's it's that acquisition. It's an HTP. It's the There are some so so it's kind of get into a little bit of the detail around that. One of the issues, you know, is that you have two connections on every rod sucker rod, but you got a coupling in between. So, these two connections are rod flat to rod flat. And so, and what you're doing is you're running you're me you're you're setting uh CD is based on some number of 30 seconds of an inch. So, whatever the rod manufacturer says. So, if you put in um 9, you know, it's 930 seconds for this connection, but you're going to do a double connection, then theoretically you would put in 1830 seconds, and you would make that connection up, but you're not 100% sure that you've got you haven't got 19 on one side and 17 on another, whatever it is, right? So, um, these these the people we're working with in North Dakota, they're actually looking at this holistic solution where they do rod prep in plant where they they take the coupling and they CD it in plant with our backup. So, you're isolating that connection, right? And then you do it in the field again. So uh and then that's then that reporting and that data acquisition system merges that data and now you have a complete connection list for that for that rig for that well. Yeah. All right. And so one of the other numbers Yeah. One of the other numbers to talk about that Ron is is that you know during co we had a client uh a new client never met these guys from southeast Saskatchewan. So, we're out in Edmonton in Calgary, Alberta, and we get this phone call from this guy from Southeast Saskatchewan. He's, "Let me let me let me let me get a quote for one of your tongs." Send him the quote. A week later, I get a PO. Never met these guys. Now, these tongs are more expensive than a standard set of tongs, especially if you're buying a set of Chinese TA tongs or something for like four grand. I mean, they're you're not going to get down to that level unless we're building thousands. But, um, you're not going to get down. No, I it's it's it's a hope and a dream, but but but we um uh you know, we all of a sudden two weeks later we get another PO for a set of tongs and we're like this is weird. So these two tongs are out there and they're running. About a year later, we get another order for two tongs. These guys have four tongs. Um about 6 months ago, Mike Etien, our sales and business development manager [clears throat] up up in Alberta and I drove through North Dakota and we we run up past this guy's shop. Innovative artificial lift. We never met them and they're like, "Yeah, we got these four tongs oil companies telling us we saved them $2 million already and they're they've done 565 jobs." So or so you're like, "Okay, great. Could we get some more of this data from you [laughter] guys?" but they don't have the data acquisition system. They're just doing rod flat to rod flat. Um and they're comfortable with that. Yeah. Right. So, we're we're seeing a lot of benefits there and it's becoming we're starting to see the title wave of that and we're right at the front end of the title wave of the injectors as well. So, we're seeing all this positive positive push in these in these areas of optimization and automation. And CD tones are in Australia. So, we've made it to Australia. That's awesome. With CD tones for major operator there. Chuck just got back from Australia with we could have sent some spare [laughter] parts with him if you let us know when he goes down and carry some stuff down and and I guess circling back to your initial question on on some of the other automation questions about the injector the you know the mechanics of the machine reducing operator input by 97% is huge but the other equipment that become that is enabled around the machine ends up ends ends contributing a ton to that. So, this is like like like Ron said, a lot more like an AC drilling rig. You're running it with a joystick, right? The rods are coming up. Yeah. Your pipes all coming up. Yeah. In our concepts, what we would probably do is because the injector has an instantaneous speed of 7200 ft per hour. So, you you you're going incredibly fast, 2 feet per second. You know, a 30 foot 30 foot joints taken 15 seconds to go into the into the well. Um, and then and then if you so choose. If you so choose. Yeah. Uh, and we could go faster. There's like like the the the actual drive motors are running at like 26 RPM. Like they could they're going to run forever. Um, so the the other equipment that sits around it that that that gets us excited are things like, you [snorts] know, when you're going into a pressurized well boore. Right now, if the three of us are sitting on a snubbing jack and we're we're looking at that coupling going through the jack, the operator's got making mental math to know where that coupling is in the BOP stack, but we know where it is cuz we have coupling sensors on the top and bottom. So, now we can maybe walk before we run, but we can automate the stripping process. We can show them visuals. They're not We can show them where that coupling is. sort of a digital twin of what you're seeing on the running through the machine. And then when you're coming back out, again, the same thing. You don't have to land your adjust your your uh your tong height or anything. You can bring the coupling straight to the tong. If it's closed face tong, then you're just closing and breaking your connection. And then uh our thought is is that we'll end up with a conveyor catwalk. Right. So instead of a standard skate catwalk that has to reset every time, you're only moving the 30 feet. Yeah. Right. And that that will speed up that whole process immensely. Now, this is really cool cuz this is just like a giant process automation on the work like basically well intervention, right? Like there's so many to your point components that are individually, you know, individually they don't sound they don't seem like a lot, right? Like making up a joint or whatever. But again, the scale of the oil field where you're doing thousands of joints and over thousands of welds and it's like and then yeah, just moving the pipe. It's our ind finally our industry probably the last I don't know fiveish years finally started focusing on like field level KPIs and optimizations and efficiencies and it's like gosh this is yes finally we're doing that and so it's it's ne it's it's nice to see people implementing technology that are that's actually you know improving those things you know the PTI the little guy we're running in in uh DJ Basin It's about 40 seconds a joint and that's based on based on the catwalt standard off the shelf catwalk and so but 40 seconds is still pretty good right with a connection and that's with a manual connection people making it up and scratching their heads and thinking and so we us versus we've actually been side by side same pad standard rig assist versus our PTI and they lose every time. What's the the like typ

you're probably you know it's a minute 10 minute one and a half yeah one and a half times what we're doing. But the deal is the guy over there is making like 10 or 11 movements and the guy on the PTI, he's just got his right hand on the throttle. The funny thing is when our guys did the first first job, first commissioning with the with the with the crew doing it in the field, the snubbing operator was like, I don't know what to do with my left hand cuz [laughter] cuz they cuz they're running like this all the time and this guy's just going in, stop or out. And then yeah, so it becomes it's it's been a pretty exciting [clears throat] process and seeing watch. Yeah. But yeah, let's just round math. That's a 50% improvement, right? Like and so it's it's again it's like yeah you know what however many seconds that is 30 40 seconds doesn't sound like a lot but 30 40 seconds if you're the guy that's doing it all day every day is so much like that gets you more day you know if you're doing stage bonuses or you know if you're contract is based off length right or any of those things like that gets you money faster too that allows for that right it allows for the operating companies the guys who aren't making any money. It allows them to go in and say, "Hey, we'll do this job for, you know, X dollar rather than by the hour." And so then that becomes appealing. Yeah. To to the operators like I got a guaranteed price, right? You know, I've been paying X and now I can pay a little bit less than X, but he's going to do it half the time. So, exactly. Everybody wins. Then he can do two jobs or three jobs if he's got people. Yeah. If he's got Yeah. you know that can do that. They're not they're not tapping out their hours. But yeah, there's it opens up a lot of dynamics that people are even or if nothing else, they can go get some more rest. They get more rest between jobs. So there's all these benefits that just kind of pile on. Yeah, you know, that's really cool. Yeah. So is everything Do you'all have like a full Let's get into the SCADA IoT stuff. Is it [snorts] you have like a full uh like RTU kind of SCADA setup basically on site for the automate the controls and all that stuff? Well, not from a so the answer is yes. Um but we would never control anything remotely because we're we're we're we're dealing with a wellbor. We rely on the operator locally to do that. um our our industrial computer platforms every everything's built on there and it has and it's a equivalent to your edge appliance, right? So, I was going to say so it's basically all operating self-contained at the edge that are on location. So, so, so all of our all of our our our systems are are built, you know, this is I used to be in the automation and software space, but I didn't I'm don't even know or or needs to know. My I had I had two goals, John, in life. One was not to fill out a time sheet, and the other one was not to know enough to get called at 2 in the morning. [laughter] I'm slowly slowly getting there on the second one. But uh um and um so so the industrial platforms that we've got the guys the PCs that we've got the guys uh have all the local control but then they're running uh uh sorry you know the MQTT broker stuff and they they're buffering all their data and and and whatnot and and then they can send packets out and and and do all that. So they we're we're continuing to develop all of that, but we're really agnostic to where we send the data. We would rather, like I said before we started here, like we're very very good at the local control. We're very good at the the the the data collection and aggregating the data and bringing it to the edge of our machine and going where do you want it? Yeah. you want it on your server, on the oil company's server, on somebody else's, right? Um, we'll help with getting it getting it there. Maybe that's the wrong decision, but it's that was that was exactly the when I was in product development, that was the exact same decision that I thought made the most sense as a hardware service company. Yeah. Why are we dabbling in the so like why should we dabble in the software space? We know nothing about that. But what we do know is field in instrumentation and data transmission. So let's hyperfocus on that and then you know even that's not that long ago but even back then it was a [snorts] seemingly radical idea to be like hey we'll just give the we'll push the data wherever you want it to go. Yeah. because back then everybody was either well you we either don't have the data or we'll only push it into our proprietary software be as long as it's acquired by our proprietary hardware kind of setup. And so I'm glad to see more people in the industry, you know, just having this like, hey, this is the operator's data at the end of the day. They own it. It's not ours. So tell me where you want to put it. If you want me to send it to you and another service provider so that they know where we're at. So that when you know if they're up next in line, they know when to be able to mobe and have their people ready. Great. Like there's all these additional again optimization things that come from just sharing data. You know, it's such a novel concept. Well, you you were at a talk a couple of years ago with a pharmaceutical guy, weren't you? Oh, I don't even know. where he was giving where where he got up and spoke in front of the oil companies and he was giving them all crap for not sharing data because they in the pharmaceutical world they they collect so much data and they share it amongst the industry for the betterment of everybody like every other industry I'm not making them out to be evangelical [laughter] I'm just saying like no but if they if they're doing it they sure as hell should be doing it and we're not and it's kind of crazy no and that's the other thing is like the evolution of this is like a lot of people got into hardware as a means to an end to feed their software, right? Like they didn't want to be hardware companies, but there wasn't anything out there to acquire the data to be able to get it into their software. So, they started on that front. And so, it's one of those things where it's like, no, let the software companies do the software because they're really good at it. But, they also don't want to be field service or hardware guys in most cases, right? Like, and and just from just from a clarification standpoint, like our guys are incredible at the local control software stuff. like they're running they're doing real time mat lab simulink crazy stuff on on on on our controllers but when it comes to that the field web app yeah like there's so many out of the box things and you know on on our on our snubbing data acquisition system for example we've got this backbone of our um we've got the backbone of our what we call our our our rapid or whatever we're horrible we just all rack all all horrible acronyms, but it's you're in good company in the oil fields. Yeah. So, [laughter] so it's um you know, the backbone of that system basically comes with uh a light version of Ignition Edge or whatever, right? So, you know, you know, we get the question, well, how much is it going to cost us a month to to be able to bring this to our cell phones? It's like the app's already developed. It's it's out of the box. You just we we're just going to secure it, make sure that you can Yeah. log in and then Yeah. we we'll help you if you want to develop something or customize it, but there's no point in Yeah. wasting your money on that. Yeah. Well, that's that's the other thing. Like that's one of the reasons I came up with that conclusion originally, and I think most people should at least consider this is that every operator has PowerBI, they've got Spotfire, they have data historians, they have all these visualization tools. And a lot of the time they want to do the formulation or the formulas or the calculations their specific way or at least have some kind of control over that. So it's like instead of me forcing them into what I think they want in a software platform, I'll just give them the data and they know how to use Spotfire way better than any of us do. So let them build their own dashboards because that's what a lot of them are are doing. Yeah. And so that's no, I think that's that's the right the right play. Um hopefully more and more partnerships keep coming up on the industry as far as the the data sharing and Yeah, even I think they do. I think they share more than we know about. Yeah. Uh well, even with the service companies though, too, right? Like operators. Yeah. finally forcing service companies to say, "No, you're both working for me on the same pad. So you're both going to share data together because you need to know what Wline is doing and Wline needs to know what Frack is doing and pump down and water transfer and everybody you know there's when I when I I talked a couple years ago actually my first trip after CO was with like I was up I was down here from Calgary and I reached out to Colin and and Jake and I ended up doing a a talk with them or podcast with them and uh what you're saying talking about sort of brings me back to something that I I I thought would already be here cuz that was sort of the height of the NFT uh kind of world and that everything blockchain coming on hard and I still sort of feel in my head that there's got to be a way that you mint an NFT for a wellbor with a 3D profile and every data set gets attached to that that record. Yeah. And then when Kico wants to sell that well to Devon, right, that NFT goes along and it's got everything that ever came along. And maybe maybe this is just that's why they don't pipe dream. That's why they don't do it so they can sell it to death. Yeah, that's [laughter] probably true. Yeah. Again, I'm an optimist, so you know. Yeah. No, I mean, it's like uh you'd be kind of minting everything they try and cram into Wellview, basically. Yeah. [clears throat] And then all those software companies be raising hell about getting, you know, there's probably something out there that's already like that that they do. So I just I'm just not on that end. So no, they uh they're still they're still very tight vested with their data as as most of them should be. But when it comes to field operational data, sharing that across service companies, which are all under the same contracts and same legal terms and conditions, so it really doesn't matter that it's somebody else's data because at the end of the day, it's actually the operator's data and so they're the ones who can tell people who share it with whatever all that. But it's like, yeah, I mean, that's the the thing people don't realize is it's like all oil field operations are literally bringing a manufacturing process to the worst most remote environments that you possibly can do it in and then two weeks later moving it to another one, right? And so it's like because of that there are so many service companies just in general involved and then when we don't share data or information with each other it makes everyone less efficient because everyone doesn't know what's going on right and so no I'm just even with y'all stuff right like just having digitized equipment set is foundationally set you up way better for the long term as people do want to do more things or come up with new algorithms or models or whatever that they want put or use for this type of stuff. It's gonna be a hell of a lot easier if all this stuff's already digital than if you have to go back and [laughter] Well, it's certainly an upgrade from four cylinders and a set of slips, you know. Yeah. And so, it's just it's just incredible how that snubbing industry has not moved an inch. Well, I feel like it's gotten uh the the the wellervicing side because I I was trying to do some like research when I was doing the kind of I basically built a business model when I was doing product development about the new products and you know for a while the uh EIA tracked workovers in the US and then in like the mid200s they just stopped. gave up and then it's like, oh well [ __ ] there is literally no work over rig data as far as like how many there are, where they are located, how like the different types or like what sizes or manufacttoay

well to well cuz some of those guys are on several wells a day, you know, a couple wells is easy and you just can't keep you physically We can't keep up with it. Yeah, it's pretty wild. Yeah, man. And now you're on pads that got right 10 20 wells and you're on this well or you're on that well, you know, even if you could GPS them, you don't know where they're at. Yeah. Yeah. It's just Wow. I think back to your point from the beginning there about like replacing all the equipment in the industry and that we need some sort of step. I think I think we've had this thing going for a long time where we've uh one of the one of the guys that brought me into the industry actually used to have this saying that everyone the the end goal is to have a guy and a dog and the guy's there to feed the dog and the dog's there to make sure he doesn't touch anything. [laughter] It's sort of like that's where we think we're already going to, right? But we're yeah, you know, we're decades away from something like that. Yeah. So, well, like I said, I think people inherently thought that AI and robotics were going to replace like the bluest color jobs, but those are the hardest jobs in my opinion to try and replace with a robot parts of them like processes. It's going to elevate the job. It's going to make us look for technicians rather than, you know, rough necks, for lack of a better term. And so it's kind of like when I was rough naked, the Hallebertton hand, the tool hand in Hallebertton, he was like God working on the [laughter] rig. You know, this guy was older and had his own stuff and you know, you did, he didn't touch nothing. He said, "Hey, put this on there and hey, put that on there." But, you know, that's the guy we all wanted to be and that's the guy we still need to be. We don't need to be we don't need to be hammering connections and we don't need to be picking up stuff and we don't I was the biggest guy on the rig and then I had a muscle man right beside me and we they just send us to get whatever. It wasn't anything on the rig we couldn't bring back together, [laughter] you know, didn't matter what it was. So, we need to we need to get out of that. Yeah. You know, we don't have we don't have those guys available to us anymore and we just have to go this direction. We have to I mean, [ __ ] I I don't think people realize how heavy a lot of the stuff that we deal with in the oil field. Even even just like chickens and you know joints on for ground iron like 3 4 inch iron is heavy. [laughter] Get you a 20 lb hammer. Yeah. Yeah. Yeah. So I was on this I was on this job. It was a it was an arco job. This is a war story. We can edit out. No, I love war stories. Let me hear it. So this company man, old guy, old road old Arco company man, and they'd sent these rental bops out and they were they had use torque wrenches to tighten the bonnet bolts and we needed to change the rams and we couldn't get the bonnet bolts to break. So there I was, the biggest guy on the planet with a 20 lb hammer and I was wrapping on them bonnet bolts and that little bitty company man's down there watching me and he's like, "Just quit. Just give up. You're done. You're going to kill something." And he got on the phone. I was in his office and he's like, "We got some big old boys out here and we got a big old hammer and we can't break them bolts." What did you idiots in the shop? You torqued them, didn't? He's like, "We torque all of our bolts before we send them out." And so there we were in the middle of the Gulf of Mexico [laughter] and we couldn't break bolts. Yeah. With the biggest equipment we had and it's like, well, yeah, that's a perfect example of what I'm talking about, right? It's like little details really matter when you're in the middle of nowhere. It's not like you can go down to the hardware store and pick up a impact wrench real quick and bring it back. A big impact wrench. So, we had to wait. We were shut down, but they got a, you know, little little torque turn machine out there to break those stinking balls. You were offshore. Yeah. Right. So, it's even like 10 times the cost that it would have been, right? Cuz he's got to get on a boat or a helicopter pickup truck. Yeah. Well, I think guys, this has been awesome. We're bumping up on time already. This was this blew by. I appreciate you guys coming on. Where can people uh [snorts] find you guys if they want to reach out and learn more? uh on uh website on automatedrig.com. We've got all our products on there and contact forms on each cl uh product, but uh for me it's Andrew Rautomatedrig.com and Ron Tautomated. No act now.com. I don't even act now.te. Yes, I'm sorry. Yeah, it's emails and domains are really starting to get fun because of Yeah. rontactnow.com. Perfect. tech. [laughter] Still don't know what we'll practice. It's a weird one. Yeah, it's all good, guys. I appreciate it. Everybody, if uh if you like what we've been doing, please remember to uh give us a like and and go subscribe. We'll see y'all next time. Appreciate it.

Open the transcript file

Hosts and Guests

Hosts

  • Bobby Neelon Host Feed-stated
  • John Kalfayan Host Feed-stated

Credit the people on this episode

Be the first to rate this episode

More episodes

All episodes
  1. EP 90: Jonathan Henderson from Spotfire

    Nov 16, 20261 hr 3 minAudio

    Jonathan Henderson spent years building oil and gas workflows inside Spotfire at Enertel, and now he leads forward deployed engineering at Spotfire itself. He talks about why engineers making seven figure calls still...

    Credit the people on this episode

  2. EP 89: Ryan Yang from GridPilot AI

    Nov 9, 20261 hr 6 minAudio

    Texas woke up to a blue wave, and Ryan Yang, cofounder and CEO of GridPilot, joins John and Bobby to talk about what it means for data centers and the grid. Ryan breaks down the years long interconnection grind, why...

    Credit the people on this episode

  3. EP 88: Kevin Kong from Everstar

    Oct 26, 20261 hr 14 minAudio

    Building a nuclear reactor in America used to take three years. Now the paperwork alone can eat a decade. Kevin Kong, CEO and Founder of Everstar, went from scaling Bird scooters to using AI to untangle nuclear...

    Credit the people on this episode

  4. EP 87: Mahyar (Matt) Mohajer from Blue Spark Energy Inc.

    Oct 19, 202655 minAudio

    Scale builds up downhole and the usual fix means chemicals, pumps, and a pile of equipment on surface. Mahyar (Matt) Mohajer, CTO at Blue Spark Energy Inc, breaks down a wireline tool that fires electric pulses to...

    Credit the people on this episode

  5. EP 86: Samra Nawaz & Vinay Acharya from WellWorth

    Oct 12, 20261 hr 12 minAudio

    Upstream finance teams have been white knuckling giant Excel models for decades, and the husband and wife team behind WellWorth thinks that era is over. CEO Samra Nawaz and co-founder Vinay Acharya talk with John and...

    Credit the people on this episode